Products

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

DEHESIVE® 920 is a solvent-free, addition-curing silicone fluid that forms an integral part of a multicomponent system. When combined with a crosslinker, platinum catalyst, and potentially a CRA® release modifier, it is employed to apply a release coating onto paper and filmic substrates.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

LIOSIL® TS 80 E is a specially developed macroemulsion of a functional silicone fluid designed as a softener for the tissue industry. It provides an excellent soft touch along with very good hydrophilicity. This product can be easily diluted with water and exhibits high substantivity on cellulose fibers.

WACKER® E60 350 is a 60% emulsion of medium-viscosity polydimethylsiloxane using a nonionic surfactant system. It has been designed for use in many applications, including automotive care, polishes, industrial release, and textile lubricants. It has been designed to be used in many applications, such as mold release, textile lubricants and softeners, automotive care, and other specialty product applications.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® Color Paste FL Yellow RAL 1021 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

WACKER® E 677 is a 60% silicone emulsion specifically formulated to create a long-lasting water repellent film. When applied to vinyl, metal, plastic, or fiberglass surfaces, it provides a good gloss. This silicone emulsion is suitable for both indoor and outdoor use.

WACKER® L 066 is a 100% polysiloxane polyethylene glycol copolymer. WACKER® L 066 exhibits unique high surface activity, which allows it to wet and spread effectively on nearly any surface. WACKER® L 066 is primarily used for lowering the surface tension of aqueous and non-aqueous solutions, as a highly effective wetting agent, and for the hydrophilic treatment of numerous materials and surfaces.

Wacker Chemie 3-Chlorobutanone (3-Cl-MEK) is a chlorinated intermediate. It is a colorless to brownish, mobile liquid with a pungent odor. This compound serves as a building block for various heterocycles and is used in the synthesis of pharmaceuticals like sulfamoxole, sulfisoxazole, and sulfoguanole. Additionally, it finds application in the synthesis of pesticides.

BELSIL® DM 1000000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a high viscosity of 1000000 mm²/s. It exhibits low surface tension and a high spreading coefficient. Its flexible polymer backbone grants it high permeability to gasses such as water vapor and oxygen. This permeability enables the skin to respire.

ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

ELASTOSIL® Color Paste FL Light Blue RAL 5015 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

ELASTOSIL® LR 3070/40 US A/B is a primerless, self-bonding liquid silicone rubber (LSR) grade that adheres to various plastic substrates, e.g. PA, PBT, and metals, but not to the mold surface. The bonding is improved by oven-curing for 1 hour at 100°C or 24 hours at room temperature.

ELASTOSIL® LR 3066/30 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R Plus 4000/60 is a two-component, high consistency silicone rubber designed for the production of molded articles. Once cured, these articles exhibit exceptional tear resistance and high transparency. This fast-curing silicone rubber demonstrates impressive elongation values and maintains excellent tear resistance. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials. Furthermore, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® R Plus 4050/55 MH 9005 is an addition-cure, one-component high consistency silicone rubber specifically designed for the manufacture of molded articles. The vulcanizates of this silicone rubber exhibit excellent heat stability. ELASTOSIL® R Plus 4050/55 MH 9005 is suitable for various household applications.

ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber. It exhibits excellent flow and high hardness. This product is specifically designed for encapsulating electronic components. To initiate the curing process, Catalyst T37 can be added for longer pot lives and curing times, or Catalyst T40 for shorter pot lives and curing times.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

Wacker Chemie Crosslinker BO 38 is a colorless to yellow liquid that consists of tris(ethylmethylketoximato)methylsilane. It is not miscible with water and undergoes decomposition in the presence of water or moisture, resulting in the formation of methylethylketoxime. This particular crosslinker is utilized as a special raw material for compounding silicone sealants.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

WACKER® LC 707 is a one-part, neutral silicone sealant renowned for its exceptional adhesion to a wide range of building substrates. It is specifically designed to effectively inhibit mold growth in high-humidity areas like bath shower rooms and kitchen sinks. By curing at room temperature and in the presence of atmospheric moisture, WACKER® LC 707 forms a durable, permanent, and flexible silicone rubber seal.

SEMICOSIL® HMDSO-EL is a high-purity hexamethyldisiloxane (HMDSO) known for its exceptional purity, low metal content, and low chloride content. This product has been specifically developed to cater to the needs of the semiconductor industry. It finds applications in various processes such as chemical vapor deposition (CVD) and spin-on dielectrics (SOD).

VINNAPAS® 827 ED is an all-round construction dispersion for two-component dry mix mortars and ready-to-use dispersion-based construction products. It is specifically suitable for ETICS/EIFS applications as a cement admix dispersion or sole binder in ready-to-use ETICS/EIFS base or top coats. VINNAPAS® 827 ED is a semi-flexible, medium-particle-size synthetic resin dispersion based on a terpolymer of vinyl acetate, ethylene, and vinyl chloride, and it contains a protective colloid.

ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.

ELASTOSIL® R Plus 4001/80 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber display high transparency and good to very good mechanical properties. This fast-curing silicone rubber exhibits excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

WACKER® 440 - Glazing and Perimeter is a high-quality silicone sealant specifically designed for various applications such as construction, glass and window building, and industrial use. This one-component, neutral-curing sealant offers outstanding adhesion, a long shelf life, and excellent tooling characteristics. When exposed to atmospheric moisture at room temperature, WACKER® 440 - Glazing and Perimeter undergoes curing and transforms into a permanently flexible silicone rubber.

VINNAPAS® CA 5310 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a softer hand is required. The dispersion has a moderately high solid content that also permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5310 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® CA 5544 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity, allowing the addition of very high filler loadings, resulting in adhesive formulations with solid contents of 80 percent or even greater. VINNAPAS® CA 5544 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

ELASTOSIL® LR 3003/50 US A/B is a liquid silicon rubber that belongs to a product family that meets several compliance standards. These include 21CFR 177.2600, which covers "rubber articles intended for repeated use," Recommendation XV for silicones, BfR, USP 23 Class VI, and ISO 10993 for short-term implantation (less than 30 days).

ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® 6000 is a one-component, acid-curing silicone sealant for general-purpose sealing in do-it-yourself applications. ELASTOSIL® 6000 cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber. It adheres excellently to glass, vitrified surfaces, ceramic tiles, selected plastics, and most coatings.