Products

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

SILFOAM® SE 1661 is a water-dilutable antifoam emulsion with a medium viscosity and excellent storage stability, thanks to its nonionic emulsifier system. This product serves the dual purpose of preventing foam formation (as an antifoam) and eliminating existing foam (as a defoamer) in a wide range of aqueous systems. SILFOAM® SE 1661 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

SILFOAM® SD 670 is an anhydrous antifoam agent based on organofunctional silicone fluids, which exhibit high compatibility with organic systems. SILFOAM® SD 670 is a self-dispersing product that spontaneously forms a fine dispersion when added to water. It is recommended for all organic systems that require a highly compatible antifoam agent.

WACKER® APF 130 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. It possesses excellent thermal stability and has a specially designed stabilization system, ensuring its reliability in various applications. With its low volatility, WACKER® APF 130 STAB is particularly well-suited for use as a heat transfer fluid and pressure transfer fluid.

WACKER® W 23 is a white, waxy, alkyl-modified polysiloxane that is resistant to hydrolysis and exhibits a very high affinity for various substrates. It is mainly used in the Polish sector. Due to its high substantivity, it is recommended for car polishes and paint conditioners as it renders the treated paint surface extremely resistant to detergents and weathering for long periods of time.

SILFOAM® SC 369 is a medium viscosity antifoam agent with a 100% active ingredient content. It is formulated with an organically modified silicone fluid. Compared to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 369 demonstrates enhanced compatibility with organic systems in general.

WACKER® AP 1000 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It finds application as a heat transfer fluid, a pressure transfer fluid, a dielectric in capacitors and transformers, and as the base fluid for heat-resistant lubricants.

SILFOAM® SC 370 is a medium viscosity antifoam agent that offers stability against hydrolysis. It contains 100% active ingredients and is formulated with an organically modified silicone fluid. In contrast to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 370 generally demonstrates improved compatibility with organic systems.

WACKER® APF 130 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. This versatile fluid finds widespread application as a heat transfer fluid and a pressure transfer fluid. It also demonstrates excellent performance as a dielectric in capacitors and transformers and serves as a reliable base fluid in heat-resistant lubricants.

SILFOAM® SD 860 is an anhydrous silicone antifoam agent formulated with organofunctional silicone fluid and organic components. It exhibits excellent dispersibility in water. This antifoam agent is particularly suitable for use in organic systems that require a high level of compatibility with the antifoam agent. SILFOAM® SD 860 can effectively address challenges commonly encountered by silicones in various applications, including paints, adhesives, and water-miscible cooling lubricants.

WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups. It serves as a versatile damping fluid, providing excellent vibration and noise reduction in various applications. Additionally, it is commonly used as a heat transfer fluid and serves as a base fluid for low temperature lubricants.

WACKER® AP 1000 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. This specially stabilized product exhibits excellent thermal stability. It is primarily used as a heat transfer fluid and a pressure transfer fluid. For practical purposes, the useful temperature range of WACKER® AP 1000 STAB is between -35 °C and +250 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

WACKER® AP 200 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants.

WACKER® TNE 50 is a nonionic oil-in-water emulsion of a polysiloxane containing alkyl and aralkyl organic groups. It is used for the formulation of release agents for the thermal molding of rubber, plastics, and low-melting non-ferrous metals. The active ingredient in WACKER® TNE 50 is a modified silicone fluid that combines the benefits of silicone fluids and mineral oils due to its special chemical structure.

WACKER® GM 196 is a brownish, highly viscous polysiloxane that is modified by alkyl and aralkyl functions. WACKER® GM 196 was developed for the formulation of release agents for the thermal molding of rubber, plastics, and low-melting non-ferrous metals. Its chemical structure imbues it with the benefits of silicone fluids and mineral oils.

WACKER® TN is a medium-viscosity modified silicone fluid that combines the advantages of silicone fluids and mineral oils due to its unique chemical structure. It is specifically designed for formulating release agents used in the thermal molding process of rubber, plastics, and low-melting nonferrous metals. Compared to traditional silicone fluids, WACKER® TN offers superior performance when the molded parts require subsequent painting, printing, coating, or bonding. Even in small quantities, WACKER® TN achieves exceptional release effects, allowing for precise reproduction of surface details on the molded articles. Furthermore, the product demonstrates excellent film-forming properties, ensuring optimal coverage and protection.

SILFOAM® SE 2263 is a water-dispersible antifoam emulsion with a low to medium viscosity. It is formulated based on an organomodified polysiloxane. This product effectively prevents foam formation (as an antifoam) and eliminates existing foam (as a defoamer) in various aqueous systems. SILFOAM® SE 2263 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

SILFOAM® SD 8260 is a 100% silicone antifoam concentrate that is specifically developed to meet the requirements of the dispersion industry. It can be used directly or as a base for creating an antifoam emulsion. SILFOAM® SD 8260 is highly recommended for foaming systems that require excellent compatibility with the antifoam agent. It is suitable for applications that typically present challenges for silicones, such as paints, adhesives, and water-miscible cooling lubricants.

WACKER® NE 4720 is an anionic oil-in-water emulsion of medium-viscosity polydimethylsiloxane. It has a low viscosity and can be easily diluted with water. WACKER® NE 4720 exhibits excellent wetting properties on various substrates. Importantly, it does not cause stress crack corrosion when in contact with acrylic glass or polycarbonates.

WACKER® E 10 is a medium-viscosity polydimethylsiloxane available as a nonionic oil-in-water emulsion. It can be easily incorporated into cold-stirred formulations. This product serves as a universal release agent in rubber processing and is also suitable for formulating paint and plastic conditioners. The active agent in WACKER® E 10 facilitates easy polishing of conditioner formulations and enhances their brightness.

WACKER® AR 200 silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with phenyl groups. It is commonly used as a heat transfer fluid and pressure transfer fluid, offering excellent thermal stability and efficient performance. Additionally, it serves as a base fluid in lubricants.

WACKER® W 27 is a white to cream-colored, high-melting waxy alkyl modified polysiloxane. It is highly resistant to hydrolysis and demonstrates a remarkable affinity for a wide range of substrates. This product finds applications in car care, car polishes, paint preservatives, plastic-care products, and surface care.

SILFOAM® SE 4260 is a silicone antifoam emulsion specifically designed for use in cold climates. It exhibits exceptional frost stability and can be applied at temperatures below 0°C. This versatile product finds application in various industries, with a particular focus on the oil and gas sector for drilling fluids. SILFOAM® SE 4260 serves as an internal antifoam agent in drilling fluids to effectively control foam. Additionally, it can be used as a defoamer for on-demand additions.

SILFOAM® SE 2262 is a water-dispersible antifoam emulsion with a low to medium viscosity. It is formulated based on an organomodified polysiloxane. This product effectively prevents foam formation (as an antifoam) and eliminates existing foam (as a defoamer) in various aqueous systems.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.