Products

Toray Toraypef® 15060 AA00 is a Polyolefin product. It can be processed by foam processing and is available in Asia Pacific, Europe, or North America. Typical application includes foam.

Toray MS-4H is a 25.4 mm (1”) carbon fiber/epoxy resin compression molding system using high strength standardmodulus (HS) carbon fiber. MS-4H is an excellent low-cost, high performance molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in medium-to-large heavy parts. 138°C (280°F) Fast Cure Standard-Modulus Compression Molding System

Toray Torelina® A756MX02 is a Polyphenylene Sulfide (PPS) product filled with 65% glass\mineral. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Toyolac® 470Y MH1 by Toray is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Toray Amilan® CM1056 is a Polyamide 6 (Nylon 6) product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America. Characteristics includes high viscosity and impact resistant.

Toray Ecodear® Prototype - High PLA Content is a Polylactic Acid (PLA) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and eco-friendly/green.

Toray Toraypef® 25020 AP17 is a Polyolefin product. It can be processed by foam processing or vacuum casting and is available in Asia Pacific, Europe, or North America. Typical application includes foam.

Toray RS-16 is a low temperature, low viscosity cure cyanate ester resin that can be used in wet winding, RTM, and VARTM processing. Its two-part construction allows easy and long-term storage while delivering excellent pot life. It is intended for lower temperature exposure with a moderate Tg requirement, and is an ideal system when used with different materials limiting the upper cure temperature. The system may also be cured using different combinations of cure/post cure temperatures and durations. 135°C (275°F) Cyanate Ester RTM Resion System

Toray Siveras™ LX70M35H is a Liquid Crystal Polymer (LCP) product filled with 35% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, good toughness and high flow.

Toray E726 is a toughened epoxy resin system with controlled flow for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for use within medical and industrial Applicationss and would also suit a wide range of engineering Applicationss. Toray E726 is compatible for co-cure with Toray EF72, a 120°C (248°F) cure resin film and Toray MicroPly™ SC72A syntactic core.

Toray Toraycon® 1101G-X08 is a Polybutylene Terephthalate (PBT) product filled with 35% glass bead\glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated and warp resistant.

Toray Torelina® A400M-D1 is a Polyphenylene Sulfide (PPS) product filled with 55% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated high stiffness and high toughness.

Toray Amilan® CM3511G33 is a Polyamide Copolymer (Nylon Copolymer) product filled with 33% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, copolymer and good esthetics.

Toray Toray MicroPly™ TCF4001 cyanate ester syntactic foam is unique in the industry due to its combination of low density and good structural properties. The material does not require pressure during cure to achieve its mechanical properties, and can be machined to shape if required. Toray MicroPly™ TCF4001 can be packed into tooling cavities. 177°C (350°F) Cure, Cyanate Ester Syntactic Foam.

Toyolac® 900 352A by Toray is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Toray Torayca® TLP5040 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 20% long carbon fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Toraypef® 15020 AP81 is a Polyolefin product. It can be processed by compression molding or foam processing and is available in Asia Pacific, Europe, or North America. Typical application includes foam.

Toray Toray MicroPly™ EM-5A is a 177°C (350°F) cure expanding cyanate ester syntactic film (core splice). Its unexpanded density is approximately 50 pcf (0.80 g/cc) and exhibits an expansion ratio of up to 4x. It is available in continuous film rolls or in sheet form from thicknesses of 10–125 mils (0.25–3.18 mm). Standard widths are 61 cm (24”), but alternative widths up to 127 cm (50”) are available upon request. 177°C (350°F) Cure Cyanate Ester Syntactic Core Splice Film.

Toray Toraypef® 20030 AP61 is a Polyolefin product. It can be processed by compression molding or foam processing and is available in Asia Pacific, Europe, or North America. Typical application includes foam.

Toray TC264-1 is a flame-retardant epoxy prepreg that has been developed for oven cure composite fabrication processes utilizing either expendable or reusable lay-up mandrels. This epoxy-based prepreg system is ideal for use in Applicationss where flame retardency is needed such as air management system ducting, decorative enclosures, and fire-retardent composite panel assemblies. 127°C (260°F) Cure, Fire Retardant Epoxy Prepreg

Toray Toraypef® 15020 AP51 is a Polyolefin product. It can be processed by foam processing or injection molding and is available in Asia Pacific, Europe, or North America. Typical application includes foam. Primary characteristic includes heat resistant.

Toray Toyolac® 912 X01 is a Methyl Methacrylate / ABS (MABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics include flame rated and scratch resistant.

Toyolac® 440Y MH5 by Toray is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Toray Toyolac® 560-X17 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and rigid.

Toray Toray Cetex® TC1225 is a high-end thermoplastic composite material, utilizing a semi-crystalline engineered PAEK resin for excellent mechanical performance. The distinctive value of Toray Cetex® TC1225 over other composites with a PAEK family matrix is its superior processability due to a low melt viscosity and reduction in processing temperature by 50–75°C (122–167°F)*. Toray Cetex® TC1225 doesn’t only yield a high-quality product used in ATL/AFP processes, it speeds up cycle times enabling cost-efficient production in all available formats. Additionally, Toray Cetex® TC1225 is an ideal composite to be overmolded with neat or short fiber reinforced PEEK resin, creating a very strong bond. Overmolding, integrating continuous fiber reinforced composites in an injection molding process, combines the strength of high-end composites with the design freedom and complexity of injection molding parts. Toray Cetex® TC1225 is available as a UD tape, a fabric prepreg, and as reinforced thermoplastic laminates (RTLs) of varying thicknesses. RTLs can be equipped with lightning strike protection, and carbon reinforced RTLs can be supplied with a thin glass top layer to protect a partly metallic assembly against galvanic corrosion. Glass scrim is also applicable in structures made from UD tape. *Standard PEEK processes at temperatures up to 400°C (752°F). Engineered PAEK (PolyArylEtherKetone) Thermoplastic Resin System.

Toray Toraycon® 5107G is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and impact resistant.

Toray Siveras™ LX70G50C is a Liquid Crystal Polymer (LCP) product filled with 50% glass\mineral. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Toray Toyolac® AX05 X03 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Amilan® CM3903GX010 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and wear resistant.

Amilan® CM3301L is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: high toughness.

Toray C740 is a cyanate ester resin system for cures at 135°C (275°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure the glass transition temperature can be increased to as high as 325°C (617°F).

Toray Toyolac® 700-SG5 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and impact resistant.

Toray Toyolac® TP60-X02 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Characteristics includess antistatic and wear resistant.

Toray Torelina® A503-F1 is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and high flow.