Products

Shanghai Sunwise Chemical FRVC411 is a toughened, flame retardant epoxy resin system designed to cure between 65°C and 120°C allowing flexibility in component manufacture. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. This resin system color is opaque white.

Shanghai Sunwise Chemical FR308 prepreg is a flame retardant resin system meeting the flame, smoke and toxicity requirements of aerospace standard CS 25.853 and rail standard EN 45545. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements. This resin system color is dark brown / black.

VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture. It can be supplied on a variety of fabrics in UD format to meet your cost and manufacturing requirements.

VTC410 is an epoxy resin system designed to combine high Tg with the potential for rapid curing. It cures from 65°C to 140°C, allowing flexibility in component manufacture. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC811 is a toughened, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC400 is an epoxy resin system designed to cure between 85°C and 135°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC475 is an epoxy resin system designed to combine excellent clarity and elevated service temperature. It cures from 80°C to 120°C, allowing flexibility in component manufacture. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC275 is an epoxy resin system designed to give excellent clarity and surface finish out of autoclave. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

APS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of APS75 surface ply and 1 layer of PSB75 bulk ply.

LTC102 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTFA500 (DF044) toughened epoxy adhesive film is design to cure between 80°C and 120°C, allowing flexibility in component manufacture.

MTC400-1 is an epoxy resin system designed to cure between 85°C and 135°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

BX180-220 Benzoxazine Tooling Prepreg is designed for high temperature large aerospace tooling applications where temperature stability, long outlife and tool durability are key. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

VTFA400 (DF034) toughened epoxy adhesive film is design to cure between 65°C and 120°C, allowing flexibility in component manufacture.

LTC216 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. Typical initial cure cycles are 40 hrs at 45°C or 16 hrs at 55°C, followed by a 200°C post cure. LTC216 can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Shanghai Sunwise Chemical PS200 prepreg is a flame retardant resin system with high service temperature designed for heat and flame shielding. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements. This resin system color is dark brown / black.

CEL100-1 is a cyanate ester prepreg designed to cure at low temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Shanghai Sunwise Chemical VTC212 (DF212) is a toughened epoxy prepreg system designed for out of autoclave cure allowing flexibility in component manufacture. This resin system color is gray.

MTFA400 resin film is designed to give enhanced toughness and higher service temperature, giving great flexibility in component manufacture. It is a toughened epoxy resin system that can be supplied with or without fabric support to meet your cost and manufacturing requirements.

LTC400 Prepreg is designed to cure at low to medium temperatures whilst giving the potential for high temperature tooling. It has been formulated to give extended outlife without compromising performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

LTC210 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. Typical initial cure cycles are 24 hrs at 45°C or 10 hrs at 55°C, followed by a 200°C post cure. LTC210 can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC450 prepreg is toughened for demanding applications and is designed for high service temperatures, giving great flexibility in component manufacture. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

HTC400 is an epoxy resin system designed to cure at 180°C. It is a toughened epoxy resin system designed for demanding, high temperature applications. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

CEM100 is a cyanate ester prepreg designed to cure at medium temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

LTC150 Prepreg is designed to cure in a lower time at low temperatures than standard tooling prepregs whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Shanghai Sunwise Chemical MTC510FRB is a flame retardant epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened, flame retarded epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. This resin system color is black.

Shanghai Sunwise Chemical OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of OPS75 surface ply and 1 layer of PSB75 bulk ply.

LTC410 Prepreg is designed to cure at low to medium temperatures whilst giving the potential for high temperature tooling. It has been formulated to give extended outlife without compromising performance. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

CEM160 is a cyanate ester prepreg designed to cure at medium temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

LTC250-2XL Prepreg is designed to cure at low temperatures whilst giving you increased outlife over other low-cure systems and great flexibility in component manufacture. It is a toughened epoxy resin system that can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

OTS65 Tooling Prepreg has been formulated to give a robust surface finish with out of autoclave processing. It can be supplied on carbon or glass formats.

MTC9810 is a revolutionary graphene enhanced, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish along with enhanced resin toughness. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.