Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Polymer Name
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
- Cure temperature 180°C
- Service temperature to 200°C after postcure
- Low CTE and shrinkage
- Work life at 20°C: 1 year
- Store at ambient temperatures
- Excellent handleability in warmer conditions – low tack
- No health and safety concerns
Applications & Uses
- Markets
- Applications
- Composites Processing Methods
- Typical Applications
High temperature aerospace tooling
Properties
- Typical Properties
Value Units Test Method / Conditions Cure Temperature 180 °C - Cure Time 2 - hrs,mins Outlife 12 - months Tg Onset 229 - - Tg Peak 250 - - Service Temperature 200 °C -
Technical Details & Test Data
- Cure Cycles and Performances
Recommended cure cycle 2 hours at 160°C followed by 2 hours at 180°C under 6 bar autoclave pressure. If required for Tg, a free standing postcure of 2 hours at 200°C can be carried out.
- Curing Schedule is meant to be a guide only and is subject to local conditions.
- To avoid exotherm particular care must be taken with thick laminates. Ramp rates must not exceed 1.0°C per minute during initial cure. Ramp rates must not exceed 0.3°C per minute during post cure (free standing)
Safety & Health
- Health And Safety
- Overalls must be worn.
- Impervious gloves must be worn.
- Curing schedule is meant to be as a guide only and is subject to local conditions.
- To avoid exotherm, particular care must be taken with thick laminates.
- Ramp rates must not exceed 1.0°C/min during initial cure and 0.3°C/min during post cure.
Storage & Handling
- Storage and Out Life
This material should be stored at ambient temperatures in a cool, dry place. It must be kept sealed in a polythene bag which must not be opened until ready for use.