Products

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Aminol possesses excellent pH development and reserve alkalinity. Due to the chemical structure of the amine, Aminol will not contribute to ammonia blush.

Vuldra 5580 is a water soluble drawing and stamping fluid based on natural and synthetic ester technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 5580 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Athena 150 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Olympus 32 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Poseidon 320 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Hercules EP 3 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 3 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Oxynul RP-4820 is an oil dispersed rust preventive developed to provide long term protection in corrosive and high humidity environments. Oxynul RP-4820 also provides fingerprint suppression with a self-healing film. The thin oily residual film is easily cleaned using an alkaline cleaner.

Vulclean FC-5111 is an economical, low alkalinity, general maintenance cleaner specially designed without using strong alkalies, phosphates or objectionable solvents. Vulclean FC-5111 is recommended for use in mechanical floor scrubbing, hand wipe, steam gun, and pressure washer applications.

Vulgrind 7810B is a high performance precision grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7810B to provide a consistent level of grinding performance as well as guaranteeing excellent wetting, lubrication and cooling.

Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Reductol is a blend of multifunctional fatty esters and soaps as well as surfactants designed to eliminate and prevent all types of coolant borne odors including sulfide and the musty odors created by shorter chained fatty acids. The specially formulated surfactants in Reductol also aid in the chemical breakdown of the biofilm, the nest where bacteria and fungi grow and breed, allowing it to be carried out with the chips or filtration equipment, thereby providing a bio-stable metalworking fluid. Reductol does not contain any heavy metals in the formulation and is easily waste treated by all current methods.

Poseidon 150 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Oxynul RP-5511 is a general purpose water displacing, solvent-based rust preventative formulated to provide long-term indoor rust protection. The water rejecting qualities and excellent coverage of Oxynul RP-5511 make it the ideal choice for most rust protection applications.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Pandora 15, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Pandora 22, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

J-Cut MO-240-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and non-ferrous metals. The high film strength of J-Cut MO-240-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-240-EP is biodegradable and essentially non-toxic.

J-Cut 9187 was specifically developed for Swiss type high performance screw machines. The low viscosity of J-Cut 9187 allows it to effectively penetrate between the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless as well as carbon steel.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

Cutrite 6500 is a micro emulsion fluid engineered for machining and grinding cast iron, steel, stainless steel and cast aluminum. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 6500 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Poseidon 32 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Vanishing Oil is designed for light duty blanking, stamping, very shallow draws and fine forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface with virtually no residue. Vanishing oil is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Cuprisan is a unique waste treatable copper complex designed to neutralize odor causing sulfides and reactive cations such as Al+3 and Fe+2. Cuprisan can be added tank-side or formulated into the coolant concentrate to provide long term odor control. Cuprisan works synergistically with biocides. When used with an Isothiazolinone-based microbicide, as little as 20% of the normal dosage is required to attain a complete kill and maintain a controlled fluid. Cuprisan will immediately eliminate and prevent the recurrence of most coolant-borne odors such as the common rotten egg smell and will aid in the stabilization of water-based cutting fluids.

Hercules EP 8 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Athena 10 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provide excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Product D is a specially blended, highly effective, silicone-based anti-foam agent. Using a unique emulsifier system that was designed for metalworking applications, Product D has an extended sump life over other silicone based defoamers. It is used in very small quantities where foaming has become a problem.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Oxynul RP-710 is a general purpose solvent corrosion preventative with excellent dewatering properties. After evaporation, the solvent leaves and ultra-thin greasy protective film that provides excellent protection properties for medium to long-term storage.

Athena 15 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Hercules EP 8A is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8A offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vulclean SK-2288 is a heavy duty surface cleaner for steel, plastic, brass, copper and aluminum alloys in vibratory and tumbling finishing operations. Vulclean SK-2288 is formulated to quickly penetrate soils and remove them while providing excellent rust protection for up to 90 days storage indoors.

Cutrite 1113B is a semi-synthetic machining fluid used primarily for cutting and grinding of cast iron and low alloy steels. The versatility of the Cutrite 1113B allows it to be used for light to moderate duty applications by varying concentration. It machines clean and is suitable for both hard and soft waters. Its biogenic formulation provides outstanding sump life and remains mild to the skin.

Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.

Microbicide CT is a high performance biocide for preserving metalworking and metal cleaning fluids. It has extremely broad-spectrum activity controlling bacteria, fungi, molds, and yeasts, while being compatible with most components in a formulation. Its very low use levels make Microbicide CT one of the most cost-effective biocides on the market.

Orion 7126 is a moderate pH fluid developed for the machining of low and high alloy steels, aluminum alloys, Inconel, hastelloy, and titanium. The unique proprietary lubricants in Orion 7126 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of aluminum machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as tapping and gun drilling. Orion 7126 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 7126 forms a stable solution that will not foam. Orion 7126 is a clean fluid that runs with trouble-free dependability.