Products

WC-565 A/B is a two-part, clear, colorless aliphatic-based polyurethane elastomer. It is recommended for use whenever a flexible, permanently transparent elastomer is required. Itis UV light and oxidation resistant and can be easily tinted or pigmented to clean bright colors.WC-565 A/B does not contain MOCA, TDI, or MDA. In addition to being an excellent castable product, it also functions well as an adhesive for bonding various substrates.

WC-595 A/B is a two-part, clear, 90 Shore A polyurethane elastomer. It is recommended for use wherever a tough, flexible, permanently transparent elastomer is required. It is UV light andoxidation resistant and can be easily tinted or pigmented to clean bright colors.WC-595 A/B does not contain MOCA, MDA or TDI. In addition to being an excellent castable product, it also functions well as an adhesive for bonding various substrates.

WC-575 A/B is a two-part, clear, colorless aliphatic-based polyurethane elastomer. It is recommended for use whenever a flexible, permanently transparent elastomer is required. Itis UV light and oxidation resistant and can be easily tinted or pigmented to clean bright colors.WC-575 A/B does not contain MOCA, TDI, or MDA. In addition to being an excellent castable product, it also functions well as an adhesive for bonding various substrates.

TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340F (171C). TC-1651 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provides production run capability.

BJB Enterprises TC-1600-AB is an unfilled, low viscosity laminating epoxy resin for variety of fabricating applications. It features the ability to cure at room temperature for applications that do not require a working service temperature above 180°F (82 °C). When post cured at elevated temperatures, this system can provide service up to 300°F (149°C). TC-1600 is commonly used to reinforce fiberglass, Kevlar/aramid, and carbon fiber fabrics. It is also used as an adhesive for bonding wood, composites, and other substrates. Adding fillers like fumed silica, micro-spheres, and short-strand fibers can create pastes for filets, fairings, and bonding applications.

TC-5040 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. When this rubber is used to make certain types of molds, it is translucent enough to see through when casting into the mold cavity.

FP-60REV 1A/BPage 1 of 2Date: 03/11/2019For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929www.bjbenterprises.com FP-60REV 1A/B60SHORE A POLYURETHANE ELASTOMERBJB’s “FP” (Fast Production) Series of productsrange from a 40 to 90 Shore A. You’ll find their 4 to 5 minute work time can easily be “demolded, tack free and tough” in under an hour.The 1:2ratio and low viscosity makes these translucent materials easy to mix, pour and pigment. FP-60REV 1is ideal for hand casting or dispensed with our CPE equipment.

TC-1604 A/B is a filled, easy to apply, laminating epoxy resin for variety of fabricating applications. Designed to be used with heavier weight fiberglass cloth (typically 8-10 oz.tooling fabric),TC-1604 can produce thick laminates without excess draining of the resin. Being a very stable system with low shrinkage.

TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads.

TC-1650 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350°F (177°C). TC-1650 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability and provide production run capability. The majority of applications for TC-1650 A/B are used in conjunction with other materials in developing composite mold structures; however, the TC-1650 A/B isfrequently used by itself.

BJB’s FD Series of semi rigid, fast reacting urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature and range in hardness from 50 Shore D to 70 Shore D. The FD Series offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For longer work times consider BJB’s MD Series of elastomers.

TC-5060 A/B is a room temperature, addition/platinum curing silicone rubber designed for: •Mold making •Encapsulation applications •Pressure pads •Gaskets •Casting low-melt metals into •Varioustypes of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC 5005 A/B-C is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 1.5-2 hour work time with 16-24 hour demold time.

TC-5045 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is anexcellent mold material for casting rigid and flexible urethane systems. It may also be used as a mold making material for casting low melting metals in continuous operations to 650F (344°C) and sporadic applications of 850F (454°C). TC-5045 A/B has proven to be less inhibited in its cure than standard platinum based silicones. It has a very favorable CTE for heat expandable mandrels used in composite tooling.

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabricationformulated to provide superior wet-out and adhesion to a variety of substrates. It is agreat material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to350°F (177°C).

TC-5024A/B is a two-component, room temperature curing silicone elastomer. This system is designed primarily for making molds, but is also used for gaskets as well as a wide variety of parts. This product is a condensation cured system using a tin catalyst that provides a 30-minute work time with a 4-6 hour demold time.

BJB’s MD Series of semi rigid, medium work time urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature.The MD Series is perfect for larger or more complex parts and offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For faster work times consider BJB’s FD Series of elastomers.

TC-5050 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals into. With the use of talc powder as an interface the TC-5050 A/B has been used in production with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C)for making a limited number of casts. With the ability to withstand high temperatures the TC-5050 A/B works very well as a mask for metal spraying and welding operations.

BJB’s MD Series of semi rigid, medium work time urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature.The MD Series is perfect for larger or more complex parts and offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For faster work times consider BJB’s FD Series of elastomers.

WC-540A/B is a two-part, water clear, colorless aliphatic based polyurethane elastomer. It is recommended for use whenever a flexible, permanently transparent elastomer is required. It is UV light and oxidation resistant and can be easily tinted or pigmented to clean bright colors.WC-540A/B does not contain MOCA, TDI or MDA. In addition to being an excellent castable product, it also functions well as a solvent-free adhesive for bonding various substrates.

TC-1611 A/B is an easy to apply, heat resistant, black surface coat commonly used as a face coat for epoxy laminating and casting systems. TC-1611 A/B provides excellent surface detail reproduction and has a service temperature of 350°F (177°C).

TC-5005 A/B is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 40-60 minute work time with 16-24 hour demold time. If a softer product is required, refer to the TC-5005 A/B-C data bulletin. TC-5005 “C” can be added to extend the elongation andreduce thehardness of the TC-5005 A/B.

TC-5061 A/B is a room temperature, addition/platinum curing silicone rubber designed for: •Mold making •Encapsulation applications •Pressure pads •Gaskets •Casting low-melt metals into •Varioustypes of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC-5030 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. You can see through molds made from this material when casting into it.

BJB Enterprises TC-1601-AB is an unfilled, low viscosity laminating epoxy resin for variety of fabricating applications. It features the ability tocure at room temperature for applications that do not require a working service temperature above 180°F (82°C). When post cured at elevated temperatures, this system can provide service up to 300°F (149°C).TC-1601is commonly used to reinforce fiberglass, Kevlar/aramid, and carbon fiber fabrics. It is alsoused as an adhesive for bonding wood, composites, and other substrates. Adding fillers like fumed silica, micro-spheres, and short-strand fibers can create pastes for filets, fairings, and bonding applications.

TC-5041 A/B is a high tear strength, addition/platinum, room temperature curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals. With the use of talc powder as an interface the TC-5041 A/B has been used with cast metal temperatures running 650°F (344°C). With the ability to withstand high temperatures the TC-5041 A/B works very well as a mask for metal spraying and welding operations.

TC-1570 A/B is a general-purpose white epoxy surface coat that can be used in conjunction with epoxy or polyurethane resin systems. TC-1570 A/B is noted for its ease of application and its ability to hang on vertical surfaces without sag or runoff.

TC-1618 A/B is an aluminum filled hi-temp epoxy surface coat that provides a tough 90 Shore D surface. This resin compound can be applied with a brush, to a thickness of 1/16" on vertical surfaces or over sharp corners without sag or run-off. TC-1618 A/B features excellent heat resistance with ability to handle constant use at temperatures up to 300F (149C). This system does not contain "MDA" or "VCHD".

TC-1607 A/B is an unfilled, medium viscosity laminating resin for high temperature plastic tooling and part fabrication. This system is ideal for wet lay-up tooling applications where excellentdimensional stability and high mechanical properties are required.