Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- RoHS/REACH compliant
- 2:1 user friendly ratio
- High tensile and tear strength
- Molds and cast parts
- Cures at room temperature
Applications & Uses
- Markets
- Applications
- Appliation Details
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77°F (25°C). You may use your own post-cure schedule but the physical properties may vary from BJB’s cureschedule of 1-3 hours at 77°F (25°C) followed by16 hours at 160°F (71°C). Do not exceed curing temperature of 200°F (93°C).
PREPARATION AND RELEASING:
When MD-60REV 1A/B is used to produce molds or parts from plaster, wood or other porous substrates, we would first recommend that they besealed.Release agents may then be applied over the sealed surface.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments, mold releases, and Jiffy®Mixers. Visit BJB’s website at www.bjbenterprises.com or consult a BJB representative for more information.
Properties
- Physical Form
- Appearance
- Clear Amber
- Physical Properties
Value Units Test Method / Conditions Hardness (Elevated Temperature Cure*) 55 - 65 Shore D ASTM D2240-04e1 Density (Elevated Temperature Cure*) 1.147 g/cc ASTM D792-00 Cubic (Elevated Temperature Cure*) 25.09 Inches per Pound - Tensile Strength (Elevated Temperature Cure*) 4700 psi ASTM D412-98a(2002)e1 Tensile Modulus (Elevated Temperature Cure*) 45000 psi ASTM D412-98a(2002)e1 Elongation (Elevated Temperature Cure*) 450 % ASTM D412-98a(2002)e1 Tear Strength (Elevated Temperature Cure*) 475 pli ASTM D624-00e1 Shrinkage Linear (Elevated Temperature Cure*) TBD in/in ASTM D2566 (1” depth) Izod Impact notched (Elevated Temperature Cure*) min. 16 ft-lb/in ASTM D256-05 Dielectric Constant (1 MHz, Elevated Temperature Cure*) 4.659 - ASTM D150-87 Dissipation Factor (1 MHz, Elevated Temperature Cure*) 0.047 - ASTM D150-87 Hardness (7 Day Ambient Cure) 55 - 65 Shore D ASTM D2240-04e1 Density (7 Day Ambient Cure) 1.147 g/cc ASTM D792-00 Cubic (7 Day Ambient Cure) 25.09 Inches per Pound - Tensile Strength (7 Day Ambient Cure) TBD psi ASTM D412-98a(2002)e1 Tensile Modulus (7 Day Ambient Cure) TBD psi ASTM D412-98a(2002)e1 Elongation (7 Day Ambient Cure) TBD % ASTM D412-98a(2002)e1 Tear Strength (7 Day Ambient Cure) TBD pli ASTM D624-00e1 Shrinkage Linear (7 Day Ambient Cure) 0.004* in/in ASTM D2566 (1” depth) Izod Impact Notched (7 Day Ambient Cure) TBD ft-lb/in ASTM D256-05 Dielectric Constant (1 MHz, 7 Day Ambient Cure) 4.659 - ASTM D150-87 Dissipation Factor (1 MHz, 7 Day Ambient Cure) 0.047 - ASTM D150-87 - Typical Properties
Value Units Test Method / Conditions Gel Time 15 - 20 minutes - - Mix Ratio by weight (Part A) 100 - - Mix Ratio by volume (Part A) 100 - - Specific Gravity (77°F (25°C), Part A) 1.103 - - Color (Part A) Pale Yellow - - Viscosity (77°F (25°C), Part A) 4500 - Brookfield Mixed Viscosity (77°F (25°C)) 2800 cps Brookfield Work Time (100g mass, 77°F (25°C)) 10 - 15 minutes - - Demold Time (77°F (25°C)) 2 - 3 hours - - Mix Ratio by weight (Part B) 50 - - Mix Ratio by volume (Part B) 50 - - Specific Gravity (77°F (25°C), Part B) 1.111 - - Color (Part B) Amber - - Viscosity (77°F (25°C), Part B) 1000 - - - Note
- *Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160°F (71°C).
- +Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160°F (71°C).
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safty Precaution
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction. Eye protectionis extremely important. Always use approved safety glasses or goggles when handling this product.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
Store ambient temperatures, 65-80°F (18-27°C). Unopened containers will have a shelf life of 6monthsfrom dateof shipment when properly stored at recommendedtemperatures. Purge opened containers with dry nitrogen before re-sealing.