Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Cure Method
- Uses
- RoHS/REACH SVHC Compliant
- Low viscosity and easily poured
- Perfect for skin simulation
- Translucent in color
- High elongation
- Appliation Details
INHIBITION:
New molds made with tin catalyzed silicones often have a tendency to inhibit the cure of various urethane materials that are cast against the silicone. Post-curing a new mold at 150F (66°C) for 24 hours will eliminate the cure inhibition problem in most cases. It is also recommended that the mold surface be washed thoroughly with soap and warm water then dried before use.
MIXING:
TC-5005 A/B is processed by adding curing agent "B" at a ratio of 10 parts by weight to 100 parts by weight of "A". Mix for 2 to 3 minutes in a clean container, then transfer material to another clean container and mix for another 2 to 3 minutes. TheTC-5005 “C” component can be added as much as 50% to the total weight of TC-5005 A/B. This will increase the elongation and lower the amount of force needed to elongate the product. With the maximum amount of part “C” added a slight tack might be present on the surface of the part. By painting this surface with silicone paints or applying talc powder to the surface, this tack can be eliminated.
Properties
- Physical Form
- Appearance
- Translucent
- Physical Properties
Value Units Test Method / Conditions Hardness 5 - 15 Shore OO ASTM D 2240-04e1 Density 1.05 g/cc ASTM D 792-00 Cubic TBD Inches per Pound - Tensile Strength 136 psi ASTM D412-98a(2002)e1 Elongation 700 % ASTM D412-98a(2002)e1 Tear Strength 13 pli ASTM D624-00e1 Die B Shrinkage Linear Nil in/in ASTM D2566 (1” depth) - Typical Properties
Value Units Test Method / Conditions Mix Ratio by weight (Part A) 100 - - Mix Ratio by volume (Part A) 100 - - Specific Gravity (77°F (25°C), Part A) 1.09 - - Color (Part A) Colorless - - Viscosity (77°F (25°C), Part A) 28000 - Brookfield Mixed Viscosity (77°F (25°C)) 2750 cps Brookfield Work Time (100g mass, 77°F (25°C)) 1.5 - 2 hours - - Demold Time (77°F (25°C)) 16 - 24 minutes - - Mix Ratio by weight (Part B) 10 - - Mix Ratio by volume (Part B) 11 - - Specific Gravity (77°F (25°C), Part B) 0.99 - - Color (Part B) Colorless - - Viscosity (77°F (25°C), Part B) 55 - - Mix Ratio by weight (Part C) N/A - - Mix Ratio by volume (Part C) N/A - - Specific Gravity (77°F (25°C), Part C) 0.97 - - Color (Part C) Colorless - - Viscosity (77°F (25°C), Part C) 0.97 - -
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safty Precaution
Use ina well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
Storage & Handling
- Storage
Store ambient temperatures, 65-80°F (18-27°C). Unopened containers will have a shelf life of 6 months from date of shipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.