ABITEC Corporation

Capmul® MCM is a mono- and diglyceride with unique properties and versatility as a solvent, emulsifier, and emollient for creams, lotions, and rinse-off applications. This high purity distilled monoester is effective as a preservative alternative, based on natural materials, and makes an excellent primary or secondary surfactant in personal care products and cosmetics. It is used to produce stable emulsions, to modify viscosity and can act as a carrier and vehicle in selected applications. It is manufactured in USA.

Acconon® MC8-2 EP/NF is a mixture of monoesters, diesters, and triesters of glycerol and monoesters and diesters of polyethylene glycols with a mean relative molecular weight between 200-400. It may contain free macrogols. It is manufactured in USA.

Capmul® MCM C8 EP/NF is a mixture of monoacylglycerols, containing variable quantities of diand tri-acylglycerols, obtained by direct esterification of glycerol with caprylic (octanoic) acid. It is manufactured in USA.

Caprol® PGE 860 is a very unique product for ABITEC, with the highest HLB of our polyglycerol family. This ingredient is well-known for its slip & foam stabilizing capabilities in rinse off products such as 2-in-1 shampoos. It also provides improved hydration & moisture for healthier looking hair.   Additionally, this food-grade, bio-based ingredient is a premium plasticizer in any range of skincare products aiding in sealed moisture and reduction of dry and flaky skin. It is manufactured in USA.

Accoquat® CS-4000 is a unique blend of cationic emulsifiers in a blended solvent system especially designed for micro-emulsification of formulations of mineral seal oils (MSO) or other organic hydrophobes. It micro-emulsifies MSO effectively with ethylene glycol mono butyl ether as its coupling agent. Accoquat® CS-4000 can produce micro-emulsions with MSO from 10-30% MSO concentration, (depending on the properties of the MSO), however is most cost effective from 15-30% MSO concentrations. Accoquat® CS-4000 generally does not require additional emulsifiers or other nonionic surfactants to produce an easily dispersible and fine micro-emulsion for rapid beading and spreading. With substantially less emulsifier it is very cost effective for ultra-type drying aids. Upon dilution in water, its unique blend of chemistries provides a consistently-functioning, high-performance, very fine micro-emulsion with MSOs. It is manufactured in USA.

Capmul® GMO-50 EP/NF (Glyceryl Monooleate) is a mixture of monoglycerides, mainly glyceryl monooleate, together with variable quantities of diglycerides and triglycerides. The nominal content of monoglycerides is 60%. It is obtained by partial glycerolysis of vegetable oil that consists mainly of triglycerides of oleic acid, or by esterification of glycerol with oleic acid of vegetable origin. A suitable antioxidant may be added. Capmul® GMO-50 EP/NF is a multi-functional emulsifier useful in the production of pharmaceutical and food products. It is manufactured in USA.

Capmul® GMO-50 glycerol monooleate is a food-grade multifunctional emulsifier that is highly useful in personal care & cosmetic applications such as, lotions, creams, lipsticks, and eyeliners. Capmul GMO-50 is sunflower glycerides and suitable in barrier creams and lotions. It easily forms gel phases with other surfactants in aqueous environments and can serve as a refatting agent. It is an excellent non polymeric invert emulsifier providing an elegant finish to your formulation. It is manufactured in USA.

Captex® 355 Medium-Chain Triglycerides originate from vegetable-based sources (typically palm, palm kernel and/or coconut). These food-grade, safe, responsibly sourced ingredients are best known for their functional benefits as emulsifiers, solubilizers and refatting agents for use in a range of markets and applications. They are preferred lipophilic vehicles and solvents for use in various delivery systems, but are most well-known for their numerous health benefits in areas such as weight management, energy, and cognition.ABITEC offers a variety of C8 (caprylic) and C10 (capric) variations to suite your formulation requirements. It is manufactured in USA.

Accoquat® CS-5000 is a blend of cationic emulsifiers designed to produce micro-emulsions when combined with mineral seal oil (MSO). These micro-emulsions are most often used as the basis for car rinse-aids and other post-wash treatments in commercial and home applications. It is manufactured in USA.