Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Paints & Coatings
Products in Paints & Coatings: Roll Coater
35 Products found in Paints & Coatings
Browse
Applications
Show All 9 Categories
Filters
Suppliers
Applications
Product Type
Compatible Substrates & Surfaces
Application Method
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
TBA Protective Solutions
TBA Protective Solutions ECP 526 'Extra' Conductive Coloured Waterbased Epoxy Enhanced Anti Slip
Ready-to-Use Product Type:
Waterborne Coating, Conductive Coating, 2K (2 component) Coating, Epoxy Coating
Features:
Excellent Aesthetics, Anti-Slip, Excellent Water Repellency
Application Area:
Electrical Components
Compatible Substrates & Surfaces:
Metal, Concrete
Application Method:
Brush, Roll Coater, Spray
Chemical Family:
Epoxy & Epoxy Derivatives
ECP 526 'Extra' Conductive Water-based anti-slip epoxy. ECP 526 'Extra' is high-quality water borne two pack epoxy system. Environmentally friendly, it offers the advantages of low odor, and easy cleaning of equipment with water and anti-slip properties. Additionally, the coating has an advantage over conventional anti-slip coatings as it can be applied by virtually any method, including spraying. It is very esthetically appealing as it is made without the traditional additives used in anti-slip coatings such as grit and metal shards and provides a silky matte finish.
NEI Corporation
NANOMYTE® TC-4001
Applications:
Appliances & Electronics, Industrial Coatings
Product Families:
Top Coats, Paints & Coatings
NANOMYTE® TC-4001 is a single component formulation designed to protect metals from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping, and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils.
NEI Corporation
NANOMYTE® TC-4001-UVP
Applications:
Aerospace & Aviation, Architectural Coatings, Appliances & Electronics
Product Families:
Top Coats, Paints & Coatings
NANOMYTE® TC-4001-UVP is a single component formulation designed to protect metals and other surfaces from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. A variety of other surfaces may be coated as well, such as plastics and composites. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils, and is available in glossy or matte finishes.
NEI Corporation
NANOMYTE® SR-100EC
Applications:
Appliances & Electronics
Product Families:
Protective Coatings, Paints & Coatings
NANOMYTE® SR-100EC is a three-part transparent, micron-thick, liquid coating that provides both scratch resistance and easy-to-clean properties to a variety of surfaces. The surface treatment is mechanically robust, is highly repellent to water and oils, and enhances lubricity. It can be applied to plastics (such as polycarbonate, PMMA, PET, polyurethane, & epoxy) as well as metals (such as stainless steel, aluminum, titanium, brass and chrome). SR-100EC is thermally cured and ideally suited for optical lenses, touch screen protectors, stainless steel appliances, hand rails, and faucets.
NEI Corporation
NANOMYTE® SR-200EC
Product Families:
Protective Coatings, Paints & Coatings
NANOMYTE® SR-200EC is a transparent, highly hydrophobic, two-part liquid coating that results in relatively thin coatings with an easy-to-clean functionality. The thermally cured coating is mechanically robust, highly repellent to water and oils, and enhances lubricity, however the key aspect is that the coating is free of fluorinated materials and environmentally sustainable.
NEI Corporation
NANOMYTE® TC-5001-UVP
Product Families:
Top Coats, Paints & Coatings
NANOMYTE® TC-5001-UVP is a single component formulation designed to protect zinc-plated and galvanized steel from corrosion and degradation. The product is a hard, dense nanocomposite coating that provides barrier protection for the alloy surface. The coating resists scratching and chipping, and strongly adheres to the substrate. The formulation has enhanced weatherability and is designed to meet customers’ requirements for film thickness and curing conditions.
NEI Corporation
NANOMYTE® TC-5001
Applications:
Appliances & Electronics, Industrial Coatings
Product Families:
Top Coats, Paints & Coatings
NANOMYTE® TC-5001 is a single component formulation designed to protect zinc plated and galvanized steel from corrosion and degradation. The product is a hard, dense nanocomposite coating that provides barrier protection for the alloy surface. The coating resists scratching and chipping, and strongly adheres to the substrate. The formulation is designed to meet customers’ requirements for film thickness and curing conditions.
Aqua Based Technologies
Aqua Flame Block 2760
Ready to Use Product Type:
Waterborne Coating
Features:
Flame Retardant
Compatible Substrates & Surfaces:
Paper
Application Method:
Gravure Coating, Air Knife Coating, Flexography, Roll Coater, Rod Coating
Aqua Flame Block 2760 is used for Flame resistant coating for paper, film and vinyl. It contains no heavy metals.
Pyrotech
PyroCoat EX-16
Ready to Use Product Type:
Waterborne Coating
Features:
Flame Retardant, Water Resistant
Compatible Substrates & Surfaces:
Wood, Paper
Application Method:
Roller, Brush, Dip Coating, Roll Coater, Spray
PyroCoat EX-16 is a clear, water based liquid that can be used either as a coating or saturant for paper, paperboard or wood based products. EX-16 dries to a clear, hard, fire resistant ceramic like coating or if impregnated into paper or paperboard produces a higher compressive strength and somewhat brittle product.
Nisku Industrial Coatings
Niskoat FerraPrime Epoxy Primer
Ready to Use Product Type:
2K (2 component) Coating, Primer
Compatible Substrates & Surfaces:
Metal, Steel
Features:
High Durability, Good Mechanical Properties, High Performance, Chemical Resistant, Corrosion Resistant, Acid Resistant, Fast Drying, Highly Versatile, Matte Finish, Ease of Handling, Solvent Resistance, Oil Resistant, Low VOC
Application Method:
Roll Coater, Spray, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Niskoat FerraPrime Epoxy Primer is a two-component, premium quality epoxy primer, ideal for ferrous applications requiring corrosion and chemical resistance, and mechanical durability. It is excellent for use on heavy equipment, exterior storage tanks, trucks and trailers, farm implements, and oilfield equipment.
Aqua Based Technologies
Aqualene® 5212
Product Type:
Waterborne Coating
Features:
Oil Resistant, Moisture Resistant, Grease Resistant
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Aqualene® 5212 is used for Release coating for baking and food wraps. Excellent resistance to oil, grease and moisture. Produces a clear, smooth coating for a wide range of demanding paper packaging applications including dry food, dairy, bakery, powder, meat, ice cream, and frozen food. Repulpable. FDA compliant for direct food contact
Akron Coating and Adhesives
Akron Coating and Adhesives ACA-10-102
Applications:
Automotive OEM Coatings, Industrial Coatings, Coil Coatings
Product Families:
Protective Coatings, Paints & Coatings
Akron Coating and Adhesives ACA-10-102 is a waterborne, semi-gloss, black, chemically-resistant coating. A cross-linking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhances the metal adhesion.
Gillespie Coatings
Gillespie Coatings 25 SERIES - ALKYD ENAMEL TOPCOAT
Ready-to-Use Product Type:
Enamel, 1K (1 component) Coating, Top Coat
Features:
Good Weather Stability, Excellent Drying Properties, Good Gloss Retention, High Gloss
Application Method:
Roll Coater, Spray, Brush
Chemical Family:
Alkyds
25 SERIES - ALKYD ENAMEL TOPCOAT is an alkyd enamel topcoat with excellent gloss retention and drying properties.
Aqua Based Technologies
Santel® Toridex 6103
Product Type:
Waterborne Coating
Features:
Oil Resistant, Moisture Resistant, Grease Resistant
Compatible Substrates & Surfaces:
Paper
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Santel® Toridex 6103 is used for for aluminum foil and metalized packaging substrates. It can also be used for paper, board and product packaging. It is Repulpable with excellent resistance to oil, grease and moisture. Produces a clear, smooth coating for a wide range of demanding paper packaging applications including dry food, dairy, bakery, powder, meat, ice cream, and frozen food. It is FDA compliant for direct food contact.
Triangle Coatings
TriPrime™
Ready to Use Product Type:
Solventless & High Solids Coating, Primer
Compatible Substrates & Surfaces:
Iron, Metal, Steel
Features:
High Solids Content, Corrosion Resistant, Fast Drying
Application Method:
Spray, Brush, Roll Coater
TriPrime™is a high-solids, solvent-reducible primer for iron and steel that dries quickly. It is intended for use in shop and CEM applications, as well as under all common finishes, including polyurethanes. TriPrime™ is intended for hand-cleaned iron and steel SSPC-SP1, SP2, or SP3, and provides active corrosion inhibition and undercutting protection. It is intended for HVLP and air assisted airless systems, but it can also be used with conventional or airless systems where legal. Most systems require thinning; see the instructions under "Recommended Thinning." Alkyd, silicone alkyd, and acrylic topcoats are all recommended.
Nisku Industrial Coatings
Niskoat ZnKoat Zinc Flake Epoxy Primer
Ready to Use Product Type:
Primer
Compatible Substrates & Surfaces:
Aluminum, Metal, Steel
Features:
High Durability, Good Mechanical Properties, Chemical Resistant, Corrosion Resistant, Good Cohesion, Fast Drying, Matte Finish, Excellent Flexibility
Application Method:
Roll Coater, Spray, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Niskoat ZnKoat Zinc Flake Epoxy Primer is a premium quality zinc-based anti-corrosive epoxy primer, ideal for applications requiring extra corrosion and chemical resistance, and mechanical durability. It delivers equal or better cathodic protection than zinc dust and provides an additional barrier of protection.
Aqua Based Technologies
Aqualene® 1603HS
Product Type:
Waterborne Coating
Features:
Moisture Barrier, Heat Sealable
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Aqualene® 1603HS is used for water-based heat seal coating with excellent moisture and vapor barrier properties. It is good product resistance characteristics for a wide range of demanding foil and paper packaging applications. It is FDA compliant for direct food contact.
Aqua Based Technologies
AquaCote WC20
Product Type:
Waterborne Coating
Features:
Excellent Stain Resistance, Excellent Water Resistance, Excellent Scuff Resistance, Low Gloss
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
AquaCote WC20 is used for Low-gloss aqueous coating for vinyl. It has excellent scuff, stain and water-resistance. It has excellent coating for wall coverings and related applications.
John L. Armitage & Company
John L. Armitage & Company COIL PRIMERS
Chemical Family:
Acrylics & Acrylates
Ready-to-Use Product Type:
Coil Coating, Primer, Waterborne Coating
Application Method:
Roll Coater, Spray
Compatible Substrates & Surfaces:
Steel, Metal
Features:
UL Flame Rated, Flame Resistant, Corrosion Resistant
Coil Primers are acrylic, water-based coil coatings which are designed for structural steel decking.
Nisku Industrial Coatings
Niskoat NexShield HS Urethane Coating
Ready to Use Product Type:
2K (2 component) Coating, Top Coat
Features:
High Gloss, Excellent Flexibility, Good Color Stability, High Durability, Chemical Resistant, Corrosion Resistant, Solvent Resistance
Application Method:
Brush, Roll Coater, Spray
Chemical Family:
Polyurethanes (PU)
Niskoat NexShield HS Urethane Coating is a two-component, premium quality polyurethane topcoat, ideal for applications requiring durability, great appearance, corrosion and chemical resistance, and a high gloss finish. It is excellent for use on heavy equipment, exterior storage tanks, trucks and trailers, farm implements, and oilfield equipment.
Triangle Coatings
TriBond W™
Ready-to-Use Product Type:
Waterborne Coating, Primer, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Galvanized Steel, Brass, Aluminum, Metal, Steel
Features:
Bondability, Water Resistant, Alkali Resistant, High Durability, Low Toxicity, High Performance, Chemical Resistant, Corrosion Resistant, Good Adhesion, Fast Drying, Acid Resistant
Application Method:
Brush, Roll Coater, Spray
TriBond W™ is a water-based, two-part epoxy primer that dries quickly. This primer can be quickly overcoated to meet the demands of high-speed production. TriBond W™ adheres extremely well to iron phosphate and blasted surfaces that have been properly prepared. TriBond W™ adheres well to most non-ferrous metal surfaces and can be applied over zinc galvanizing, inorganic zinc, and most other non-ferrous metal surfaces. Corrosion, water resistance, adhesion, and overall durability are all excellent.
Aqua Based Technologies
Staticon 450
Product Type:
Clearcoat
Features:
Anti-Static
Compatible Substrates & Surfaces:
Plastics, Paper
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Staticon 450 is used for Anti-static clear coating. It can be used on films, plastics, paper, and board. It has Conductivity of107 to 109. It is FDA compliant.
Aqua Based Technologies
Aqualene® 5050
Product Type:
Waterborne Coating
Features:
Oil Resistant, Moisture Resistant, Grease Resistant
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Aqualene® 5050 is used for Economical OGR coating for paper, board and product packaging Repulpable with excellent resistance to oil, grease and moisture. It produces a clear, smooth coating for a wide range of demanding paper packaging applications including dry food, dairy, bakery, powder, meat, ice cream, and frozen food. It is FDA compliant for direct food contact.
Akron Coating and Adhesives
Akron Coating and Adhesives ACA-10-101
Applications:
Automotive OEM Coatings, Industrial Coatings, Coil Coatings
Product Families:
Protective Coatings, Paints & Coatings
Akron Coating and Adhesives ACA-10-101 is a water-borne, matte black, chemically resistant coating designed especially for resistance to exterior exposures encountered in automotive applications. A crosslinking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhance the metal adhesion.
Triangle Coatings
Liquid Porcelain™
Applications:
Furniture
Product Families:
Top Coats, Paints & Coatings
Liquid Porcelain™ was created specifically for the tub and tile refinishing industry. Liquid Porcelain provides a water and stain resistant finish that lasts for years and can withstand the rigorous service exposure that bath and kitchen surfaces are subjected to. Liquid Porcelain has the highest gloss, gloss retention, color retention, and durability available in today's paint technology. This two-part acrylic urethane dries quickly and has a resilient, tile-like toughness that provides unrivaled impact and abrasion resistance. Furthermore, Liquid Porcelain is water impermeable and completely resistant to most chemical splash and spill contact. This premium refinishing enamel comes in three gloss levels: high gloss, semi-gloss, and low semi-gloss.
Aqua Based Technologies
Staticon 1750
Product Type:
Clearcoat
Features:
Anti-Static
Compatible Substrates & Surfaces:
Plastics, Paper
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Staticon 1750 is used for Anti-static clear coating. It can be used on films, plastics, paper, and board with conductivity of 107 to 109. It is FDA compliant.
Zeller International
FlameAway IV™ 171
Ready-to-Use Product Type:
Coating
Features:
Flame Retardant, Fast Drying
Compatible Substrates & Surfaces:
Plastics, Wood
Application Method:
Dip Coating, Roll Coater, Spray
FlameAway IV™ 171 is a topical film forming flame retardant coating.
Triangle Coatings
Triangle Coatings Epoxy Acrylic DTM
Ready to Use Product Type:
Waterborne Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Metal, Steel
Features:
Good Toughness, High Durability, Corrosion Resistant, Low Odor, Water-based, Low VOC
Application Method:
Roll Coater, Spray, Brush
Chemical Family:
Acrylics & Acrylates
Triangle Coatings Epoxy Acrylic DTM is a two-component water-based epoxy acrylic primer/finish that is intended for direct-to-metal applications over properly prepared surfaces. It dries to a tough finish that is extremely durable and performs well. Epoxy Acrylic DTM is a rust-inhibiting coating with a high build.
Triangle Coatings
Tripoxy™
Ready-to-Use Product Type:
Solventborne Coating, Solventless & High Solids Coating, 2K (2 component) Coating, Enamel
Compatible Substrates & Surfaces:
Metal, Steel, Concrete
Features:
Chemical Resistant, Good Adhesion, Acid Resistant, High Gloss, Good Wettability, Solvent Resistant, High Solids Content, Abrasion Resistant, Alkali Resistant, Gasoline Resistant
Application Method:
Spray, Brush, Roll Coater
Chemical Family:
Epoxy & Epoxy Derivatives
Tripoxy™ is a two-component (1:1 mix ratio), high-solids, solvent-borne, polyamide cure, high-gloss epoxy enamel with USDA approval for incidental food contact. The cured film is extremely dense and hard, but not brittle. It is watertight and impermeable, making it suitable for submersion service. It is resistant to most common solvents, all alkalis, and most acids when splashed or spilled. The 41 series has good adhesion but only adequate wetting and penetration. Tripoxy, like all epoxies, chalks heavily when exposed to sunlight; this is noticeable after 6 months and continues for 12-18 months. Tritpoxey is also available in a clear form.
Nisku Industrial Coatings
Niskoat Billy Grip HD Non-Slip Epoxy Floor Coating
Ready-to-Use Product Type:
Solventless & High Solids Coating, 2K (2 component) Coating, Epoxy Coating, Coating
Compatible Substrates & Surfaces:
Aluminum, Metal, Steel, Concrete
Features:
Fast Drying, Anti-Slip, Solvent Resistance, Oil Resistant, Low VOC, High Durability, High Performance, Chemical Resistant
Application Method:
Brush, Roll Coater
Chemical Family:
Epoxy & Epoxy Derivatives
Niskoat Billy Grip HD Non-Slip Epoxy Floor Coating is a two-component epoxy coating containing aggregate to build non-slip walking surfaces. The high solids, high build safety coating has great chemical resistance properties, including oils and solvents. With superior durability, the texture profile lifespan is extended with this high-performance product.
CTM Coatings
CTM Coatings WECT-DP
Ready-to-Use Product Type:
2K (2 component) Coating, Waterborne Coating, Primer
Features:
High Capacity of Penetration, Low Viscosity
Application Method:
Roll Coater
Chemical Family:
Epoxy & Epoxy Derivatives
CTM Coatings WECT-DP is a two-component deep penetrating waterborne epoxy primer. We recommend using WECT-DP for all our epoxy ECTR systems as a primer to maximize adherence of topcoats.
Aqua Based Technologies
Aqualene® 5000
Product Type:
Waterborne Coating
Features:
Oil Resistant, Moisture Resistant, Grease Resistant
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
Aqualene® 5000 is used for Hi-Performance OGR coating used for paper plates, food wraps and other food packaging structures. Repulpable with excellent resistance to oil, grease and moisture. It produces a clear, smooth coating for a wide range of demanding paper packaging applications including dry food, dairy, bakery, powder, meat, ice cream, and frozen food. FDA compliant for direct food contact.
Aqua Based Technologies
AquaCote Top Shield PT3
Product Type:
Waterborne Coating, Digital Ink
Features:
Anti-Blocking, Good Adhesion
Application Method:
Flexography, Air Knife Coating, Rod Coating, Roll Coater, Gravure Coating
AquaCote Top Shield PT3 is used for aqueous, clear, satin finish coating for PVC surfaces (Vinyl). Non-blocking coating with high ink adhesion levels for polyester, (Mylar) polyethylene, vinyl, foil, nylon, paper and board. It has excellent coating for large format digital printing
Triangle Coatings
Trilon S™
Ready to Use Product Type:
2K (2 component) Coating, Top Coat, Solventless & High Solids Coating
Compatible Substrates & Surfaces:
Metal
Features:
Good Flexibility, Good Gloss Retention, High Gloss, Good Color Stability, Chipping Resistance, High Solids Content, Abrasion Resistant, Low VOC, Impact Resistance, Good Toughness, High Durability, High Performance, Good Weather Stability, Chemical Resistant
Application Method:
Brush, Roll Coater, Spray
Trilon S™ is a next-generation 2-part acrylic urethane topcoat that employs cutting-edge technology. Trilon S cures to a tough, abrasion-resistant film that is resistant to the majority of chemicals. When exposed to extreme weather in exterior applications, this product performs admirably in terms of gloss and color retention. Trilon S meets or exceeds most OEM specifications for off-road vehicles when applied over a high performance primer.
Triangle Coatings
Tripoxy HB™
Ready to Use Product Type:
Top Coat, Solventless & High Solids Coating, Epoxy Coating, 2K (2 component) Coating
Features:
Low Toxicity, High Performance, Corrosion Resistant, Good Flow, High Solids Content, Low VOC, Good Leveling Properties
Application Method:
Roll Coater, Spray, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Tripoxy HB™ is a two-component epoxy with a high solids content, high build, and low VOC. Tripoxy HB is a high-performance coating for ferrous and nonferrous metals such as zinc, galvanizing, inorganic zinc rich, copper, and brass. This topcoat has good flow and leveling properties. Tripoxy HB provides an extremely high performance coating system when combined with a two-part epoxy primer. When applied to properly prepared surfaces, this product can be used for immersion applications.