Products in Inks & Pastes: Injection

127-20 is a two component, pad printable, conductive ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to pretreated polyethylene, and polypropylene, as well as to some varieties of pretreated polytetrafluoroethylene. This material will also adhere to Polyurethane, polyamide, melamine, phenolic resins, metal, and glass substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 127-20 include, but are not limited to, emi/rfi shielding, flexible circuits, and membrane switches.Features Low temp curing, adhesion to difficult substrates

122-01(P) is a single component, electrically insulating, solvent strippable, polyimide based, ink and coating suitable for application by screen-printing, dipping and syringe dispensing. This product is designed for use on electrical and electronic components where high temperature stability is required. The low CTE and high flexibility allow for good adhesion and low stress when exposed to high temperatures. 122-01(P) is a flexible version of CMI 122-01.Features Polyimide dielectric High flexibility

127-49A/B is an electrically conductive, two-component, silicone ink and coating suitable for high temperature applications. 127-49A/B is suitable for application via syringe dispensing and screen printing. Unlike typical conductive inks, the high temperature capability of this product makes it useful in a range of unique applications such as extreme performance coatings. 127-49A/B is also able to cure at room temperature.Features Two part, room temperature curing silicone conductive adhesive.

114-29 A/B is a two component, pad printable, radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to pretreated polyethylene, and polypropylene, as well as to some varieties of pretreated polytetrafluoroethylene. This material will also adhere to polyurethane, polyamide, melamine, phenolic resins, metal, and glass substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 114-29 A/B include, but are not limited to, manufacturing of medical devices and instruments.Features Abrasion resistant, solvent resistant ideal for PEEK and similar substrates

119-10 is a pad printable, electrically conductive, medical grade ink, and coating, suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 119-10 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors as well as medical electrode applications. 119-10 is a pad-printable version of 108-38.Features Electrode ink

127-48D is a matte finish, flexible, electrically insulating ink and coating suitable for application by screen printing, dipping, and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, polycarbonate, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is very resistant to flexing and creasing. Some applications for 127-48D include, but are not limited to, insulating polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 127-48D is a thermosetting version of 124- 18T.Features Solvent resistant washable dielectric ink ideal for fabrics

119-28 is an extremely flexible, pad printable, electrically conductive, carbon filled ink, coating and adhesive suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 119-28 include, but are not limited to, polymer thick film circuitry and membrane switches. 119-28 is a pad-printable version of 108-46.Features Very flexible resistive ink

118-43(LPS) is an extremely flexible, pad printable, electrically conductive ink, coating and adhesive suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 118-43(LPS) include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 118-43(LPS) is a crosslinking version of 118-43T.Features Extremely flexible electrically conductive ink, ideal for elastomeric and difficult substrates.

114-29B A/B is a two component, pad printable, blue radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to pretreated polyethylene, and polypropylene, as well as to some varieties of pretreated polytetrafluoroethylene. This material will also adhere to polyurethane, polyamide, melamine, phenolic resins, metal, and glass substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 114-29B A/B include, but are not limited to, manufacturing of medical devices and instruments. 114-29B is a blue version of 114-29.Features Abrasion resistant, blue, solvent resistant & ideal for PEEK and similar substrates

114-29G A/B is a two component, pad printable, green radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to pretreated polyethylene, and polypropylene, as well as to some varieties of pretreated polytetrafluoroethylene. This material will also adhere to polyurethane, polyamide, melamine, phenolic resins, metal, and glass substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 114-29G A/B include, but are not limited to, manufacturing of medical devices and instruments. 114-29G is a green version of 114-29.Features Abrasion resistant, green, solvent resistant & ideal for PEEK and similar substrates

128-06(PP) is a pad printable, electrically conductive, medical grade ink, and coating, suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing in both mechanical and electrical stability. Some applications for 128- 06(PP) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 128-06(PP) is a pad printable version of 113-09T.Features Electrode ink

119-31TS is an extremely flexible, pad printable radio opaque ink and coating for application by pad printing and syringe dispensing. The product features excellent adhesion to PEBAX, Kapton, Mylar, glass and a variety of other substrates. Unlike conventional materials this product offers a balance of properties featuring excellent toughness high flexing, crease, and abrasion resistance as well as the ability to elongate and stretch. These properties make 119-31TS well suited for applications including, but not limited to, manufacturing of markers for medical devices and fluoroscopy as well as shielding for security applications. 119-31TS is a more chemically resistant version of 119-31T.Features Very flexible, low temperature curing, ideal for urethane, increased solvent resistance

124-25 is a flexible, radio opaque ink/coating for application syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, and thermal aging. Some applications for 124-25 include, but are not limited to, manufacturing of medical devices and instruments.Features Abrasion resistant, solvent resistant epoxy ink

128-33 is a single component, silver filled, electrically conductive epoxy ink and adhesive suitable for application by syringe dispensing and pin transfer. This product is designed for assembling electrical components and features exceptional pot life, flexibility, and chemical resistance compared to typical conductive adhesives. With its unique balance of properties 128-33 is well-suited for bonding on a wide range of substrates including copper, silicon, glass, and gold among many others.Features High temperature single component conductive adhesive

124-17 is a flexible, pad printable radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, and thermal aging. Some applications for 124-17 include, but are not limited to, manufacturing of medical devices and instruments.Features Abrasion resistant, solvent resistant epoxy ink

113-49 is a pad printable radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 113–49 include, but are not limited to, manufacturing of medical devices and instruments.Features Flexible, abrasion resistant radio opaque ink

125-14 is a carbon-based, electrically conductive ink and coating suitable for application by stamping, screen printing, dipping and syringe dispensing. This product has improved thermal stability compared to 111-26 and features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials this product is very resistant to flexing and creasing. Some applications for 125-14 include, but are not limited to printed heaters, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination. 125-14 can be blended with CMI's 126-48 (50 Ω/square) in any ratio to obtain in-between electrical conductivity.Features High resistance ink, blend-able with 126-48

127-39 is a one component, electrically conductive, solvent-resistant ink and coating designed for screen-printing and syringe dispensing. This product features a high degree of flexibility and excellent adhesion to Kapton®, Mylar®, glass, polycarbonate ITO coated substrates as well as a variety of other substrates. 127-39 has the unique ability to adhere well to difficult to stick to surfaces such as silicone hardcoated acrylic and polycarbonate. Unlike many conductive inks 127-39 is resistant to harsh solvents such as MEK, high humidity environments including boiling water, and is resistant to aging and UV exposure.Features Chemically and abrasion resistant conductive ink

127-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 127-07 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at up to 200% elongation.Features Elastomeric conductive ink

106-12 is a silver/carbon-based electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 106-12 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination.Features Standard electrode material for ECG

117-23 is a medical grade, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some uses for 117-23 include, but are not limited to, EKG and Tens electrode applications, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches.Features Standard electrode ink for defibrillation electrodes

128-08 is a pink radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 128-08 include, but are not limited to, manufacturing of medical devices and instruments.Features Very flexible pink radio opaque

113-09(LPS) is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09(LPS) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 113-09(LPS) is a more flexible, solvent resistant version of 113-09.Features More flexible, solvent resistant version of 113-09

127-38 is a one component, electrically conductive, solvent-resistant ink and coating designed for screen-printing and syringe dispensing. This product features a high degree of flexibility and excellent adhesion to Kapton®, Mylar®, glass, polycarbonate ITO coated substrates as well as a variety of other substrates. 127-38 has the unique ability to adhere well to difficult to stick to surfaces such as silicone hardcoated acrylic and polycarbonate. Unlike many conductive inks 127-38 is resistant to harsh solvents such as MEK, high humidity environments including boiling water, and is resistant to aging and UV exposure.Features Chemically and abrasion resistant conductive ink

125-09TS is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09TS include, but are not limited to, manufacturing of medical devices and instruments. 125-09TS is a thermosetting version of 125-09T.Features Very abrasion resistant, thermosetting version of 125-09, ideal for urethane

127-49A/B is an electrically conductive, two-component, silicone ink and coating suitable for high temperature applications. 127-49A/B is suitable for application via syringe dispensing and screen printing. Unlike typical conductive inks, the high temperature capability of this product makes it useful in a range of unique applications such as extreme performance coatings. 127-49A/B is also able to cure at room temperature.Features Ultra high temperature conductive ink

120-24 is a carbon filled, screen-printable, electrically conductive, epoxy-based ink and coating suitable for application by screen- printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-24 include, but are not limited to, printed potentiometers, printed resistors, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and anode coatings for tantalum capacitors. 118-41 is a 0.01 Ω/sq/mil silver version of this product.Features High temp epoxy ink, adheres to ITO and polyimide substrates

126-21C is a one-component, solvent-resistant, electrically conductive ink, coating and adhesive suitable for screen-printing circuit lines. 126-21C can also be thinned with fast evaporating solvents such as MEK for spray application. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone after curing even at low temperatures. It is also very resistant to scratching and creasing. Some applications for 126-21C include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical terminations for surface mounted devices, and bus bars on Indium Tin Oxide (ITO) sputtered surfaces. 126-21C is a pre-catalyzed version of 126-21A/B.Features Economical Conductive ink for ITO

126-35 is an ink/coating with very high coverage and good electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Mylar, glass and a variety of other substrates. The proper use of this ink can result in a significant cost saving. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 126-35 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 126-35 can be blended with 125-15 (0.01 ohm/sq/mil version) or 112- 47 (25,000 ohm/sq/mil version) to obtain a range of conductivities.Features Economical high coverage conductive coating

125-19FS is a flexible, re-workable, electrically conductive, silicone-based ink. The overall balance of peel strength, cohesion, printability and high temperature holding power provides a versatility that makes this product useful in a wide range of coating, printing, fastening and bonding applications.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Wide Range of Applications Screen Printable

120-07(LPS) is a screen-printable, electrically conductive ink, coating and adhesive suitable for application by stamping, screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, polycarbonate, glass and can also be used on low surface energy coatings such as transparent conductive oxides. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-07(LPS) include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 120-07(LPS) is a cross-linking version of 120-07(LP) and a more flexible version of 120-07T.Features Electrically conductive for ITO and polycarbonate

113-15 is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 113–15 include, but are not limited to, manufacturing of medical devices and instruments.Features Low temperature curing, flexible & highly filled, ideal for polyester

113-09(S) is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09(S) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 113-09(S) is a chemically resistant version of 113-09.Features Increased solvent resistant version of 113-09

112-48A is an electrically conductive ink/coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 112–48A include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 112-48A is a more flexible version of 112-48.Features Standard membrane switch resistive ink

126-49(SP) is a highly elastomeric, electrically conductive, silicone-based medical electrode ink. This product features a high-performance in a wide range of sensing, delivery, and stabilizing applications and features excellent repeatability, stability, and accuracy. This product is highly resistant to flexing and creasing and is ideal for applications that include, but are not limited to: ECG electrodes, TENS electrodes, reference electrodes, and transdermal drug delivery. 126-49(SP) is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Long screen life Superior Elasticity Screen Printable/Syringe Dispensable Elastomeric electrode ink for reference electrodes