Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Application Method
- Pad-print
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Conductivity 0.018 ohms/sq/mil - - Typical Cured Properties
Value Units Test Method / Conditions Filler Silver - - Percent Silver (cured) min. 84 - - Volume Resistivity 5.0e-05 Ω - cm - Sheet Resistivity 0.018 Ω/sq. - Glass Transition Temperature 75 °C - Hydrolytic Stability Excellent - - Useful Temperature Range -55 to 200 ºC - Thermal Stability Good to 250 °C -
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at 25°C.
- Suggested Handling & Curing
118-43(LPS) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinners 113-39 (fast drying) or 127-27 (slow drying). Prior to using, be certain to re-suspend silver. Best properties, for most applications, result when cured for 5 – 10 minutes at 170°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.