Products in Ready-to-Use Products: Waterborne Coating

TUFF-POXY 607-WB is a two-component, liquid-applied, water-borne epoxy primer/sealer for various substrates. It is one of the primer/sealers used with the moisture-curing deck coating systems. It is a two-component, low odor, liquid applied epoxy primer/sealer designed for easy mixing with a simple 1 to 1 volume ratio. The primer/sealer may be applied after thoroughly mixing the two components together and allowing a 30 minute induction period.

Aqua Coat Tabletop Commercial Finish (Self-Cross Linking) is a ready-to-use, single component, waterborne urethane acrylic polymer. Designed for maximum protection and durability. This innovative self-cross linking water-based urethane provides the durability and warm amber look of traditional solvent-based urethanes, but is quick drying, low odor and water clean-up. Not suitable over white finishes due to amber hue. Can be used on furniture, cabinets, and other high traffic areas.

Decoplast® Decoseal is a 100% acrylic formulated clear coat sealer with either a Matte or Gloss finish. It dries to a clear appearance, reduces dirt pickup resistance and cleans up easily with water. It provides a surface barrier to resist UV, acid rain and other environmental pollutants. It improves the water and freeze thaw resistant of porous exterior surfaces by lowering water absorption.

ICT Texture-EEZ 3500 is a water-based Acrylic, non-cementitious, quartz, slip resistant texture coating designed for concrete and masonry surfaces. Texture-EEZ 3500 is a hard durable high strength finish available in 1- & 5-gallon pails and is factory blended to insure color consistency. H2COOL Technology is a groundbreaking pigmentation process that reflects IR rays resulting in a lower surface temperature as well as less deterioration that would cause color loss, fading, and other issues caused by absorption of IR rays.

DC5040 is a water based thin film intumescent coating used to provide fire resistance to common construction assemblies such as gypsum walls, floor/ ceilings and engineered wood framing members such as I-Joists.

Vimasco Corporation WC-5 Vinyl Acrylic Coating is a heavy-bodied, water-based, vinylacrylic mastic, for use over all types of insulation systems, both indoors and outdoors. It can also be applied as a protective coating over masonry surfaces and a variety of other substrates. Special care should be taken when applying WC-5 to foil facing as it will not always bond tightly, depending on the type of foil, test applications are recommended.

BCM Inks U.S.A. DuaKure is an alternative to UV coatings. It is a water based OPV (overprint varnish). It is made from a natural secreted plant product. Therefore, it meets BCM’s rigorous environmental standards. It offers numerous benefits versus UV and standard water-based coatings/varnishes.

Flame Control No. 133A is a water base, fire retardant polyurethane varnish, with a semi-gloss sheen. It is designated for use on all new or previously coated interior wood surfaces (except floors). The varnish will not leach or turn white on aging or washing.

Nowo® Dry WB is a water-based surface treatment agent suitable for professional stone and mineral surfaces. Nowo® Dry WB forms a water- and dirtrepellent surface that protects the substrate from crop growth, frostbite and soiling.

FlameAway II™ 169 is an aqueous based coating / retardant for synthetic fabrics or blends, such as acrylic, rayon and cotton blends. For interior use only.

Hallman Lindsay Duratech Premium 100% Acrylic Int/Ext Enamel 318 is a professional grade waterborne acrylic enamel designed for easy application and lasting protection. Streamline on-site maintenance projects with an all-purpose enamel that can be used on interior and exterior trim, doors, handrails, cabinets, or even as a highperformance acrylic wall coating. Drying to an alkyd-like hardness, this low-odor acrylic enamel provides stain and impact resistance that lasts. The 100% acrylic resin creates a durable and flexible coating for long-lasting color protection.

Stifel SC is a single component, water based, maximum performance silane sealer for horizontal concrete.

Evercoat EC is a general purpose all acrylic elastomeric roof coating.

ArmorPrime WB (1080) is a two-component water-based epoxy that acts as a multi-functional primer or as a sealer. A great choice to seal older concrete surfaces to prevent out-gassing and air bubbles from transmitting through subsequent coatings. When applied in two or more coats, ArmorPrime-WB #1080 produces a very durable sealer coat. (For interior use only).

WB-300 Series Black is a fast-drying, glossy finished water based anti-corrosive coating for superior protection of steel pipe. It can be applied over properly prepared new and reconditioned pipe.

Hill and Griffith EZ KOTE™G PLASTIC PM Core and Mold Coating is a water based refractory coating formulated for ferrous and non-ferrous castings. The formulation permits the product to be used on small intricate cores up to heavy cores and molds. The Premixed version (PM) typically has a Baume of 39.5.

PyroCide White is a water-based latex intumescent coating specifically designed for spray application on wood based building materials. It is non-yellowing, high hiding, low gloss, and clean white in appearance.

Williams Hayward Protective Coatings Aqua-Slip Waterborne Copolymer/Terpolymers is waterborne dispersions, emulsions or solution coatings. For use as a quick release coating for interiors of plastic pellet hoppers, coal cars, fly ash hoppers, refuse containers and recycle trucks. Polyethylene and /or Teflon extenders are used. The emulsion versions exhibit excellent acid and alkali resistance, while the dispersions and solution have dilute acid and alkali resistance.

Perdure E32 is a water-based epoxy primer/sealer formulated to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. Perdure E32 is specially formulated to reduce concrete outgassing. Perdure E32 has a very low odor and can be used in occupied areas. Perdure E32 is ideal for both new and old concrete surfaces. Perdure E32 is used as a primer for Perdure high build and thin-film coatings systems.

Avion Manufacturing GREEN-LABEL stop-off coating against carburizing-water-based is a Highly effective stop-off protection for use with vacuum or gas carburizing. It can reach temperatures up to 1900°F and depth up to 0,125" depending on the coating thickness. It is applied by painting, dipping and spraying (airless system).

Tianjin Boyuan New Materials Anti-static Primer B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation.

ADERPRIM MULTI'SPRAY is a Multi-support insulating & anti-rust adhesion primer in aerosol based on alkyd resins in solvent phase. Which has Great versatility of use, Isolates tasks and blocks their migration to subsequent layers, Anti-rust primer, Good adhesion on difficult substrates, Type of propellant gas: butane / propane.

Intumax EP 102W is a two-part waterborne epoxy intumescent coating. It is engineered to provide a protective coating that combines toughness and wear resistance with low flame spread, low heat transfer and low smoke. In addition, the smoke generated is low in toxicity. The char foam that is formed rises in 20 - 40 seconds. Once this char layer forms, smoke generation is almost entirely eliminated; the burning ceases, and coated surfaces are thermally insulated. Intumax EP102W cures within 24 hours at room temperature to a tack free coating while providing close to 3 hours of working life. For ease of application or for spraying, Intumax EP102W is readily thinned with tap water.

HEXAFOR™ 6284 is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

NovaCoat AQ-620 was formulated to be a high gloss 1 or 2- sided coating for use in sheetfed and flexographic applications. It can be used with some glues, foil stamps and UV top coatings. TEST BEFORE USING.

Kelate® MR6D is a highly reactive water reducible chelating polymer for rust passivation on rusted steel which has been hand or power cleaned, or blasted. It can be applied on any rusted surface which has been mechanically brushed (CST2 standards). It will also react with mechanically activated steel like blasted steel.

Williams Hayward Protective Coatings Aqua-Lust/Aqua-Lust Epoxy Ester is waterborne solution acrylic-alkyd & ester copolymers with a dehydrated V.O.C. range of 0.60 - 0.5 for use as a topcoat or direct to metal paint. Possesses excellent initial gloss of 90-95% (60° head). Has clear depth of image with superior gloss retention. Has dilute acid and alkali resistance.

Surfa-Seal W is a clear gloss finish. It assumes the texture of the surface to which it is applied. For normal cleaning, use detergent and water. Wax may be applied. For light stain removal use mineral spirits. Damaged areas are easily touched up by a brush or roller.

NovaCoat AQ-687 is a high heat-resistant aqueous coating formulated for application on paper and paperboard with in-line blanket coaters, flexo presses and flexo/gravure type coaters. It has heat resistance to 400°F, good dry speed, flow and leveling, rub and block resistance.

HEXAFOR™ 6242 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, Bricks and (especially) marble. It can be used also for paper trea™ent.

Triangle Coatings Epoxy Acrylic DTM is a two-component water-based epoxy acrylic primer/finish that is intended for direct-to-metal applications over properly prepared surfaces. It dries to a tough finish that is extremely durable and performs well. Epoxy Acrylic DTM is a rust-inhibiting coating with a high build.

PG 700 is a high quality water-based elastomeric coating available in white or as tinted, which cures to form a seamless membrane when applied over the entire roof area. In addition to keeping the surface cool, PG 700 extends the life cycle of new and existing roof systems, providing protection from ultraviolet sun and other weather exposures.

STONETECH® Heavy Duty sealer is a water-based penetrating sealer that provides advanced stain and antimicrobial product protection, while preserving the natural look of the surface. It protects against oil and water-based stains on natural stone, tile, masonry, and grout in interior and exterior applications. Built with Microban® antimicrobial protection, STONETECH Heavy Duty Sealer continuously inhibits the growth of stain and odor causing bacteria, mold and mildew on surfaces. A safer alternative to high VOC solvent based sealers that is better for you and the environment and comes with a 25 year product satisfaction guarantee.

Satin Seal is formulated from current state-of-the-art water-based ultraviolet resistant acrylic coatings technology. Designed as a film forming acrylic sealer, Satin Seal creates a non-yellowing barrier coating that seals and protects concrete, exposed aggregate, natural stone, slate, stamped and colored concrete against food stains, grease, oils, rust and water, while enhancing the natural colors of the applied surface whether indoors or out.