Products in Ready-to-Use Products: Vinyls, Vinylics & Vinyl Derivati...

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

Viniplas 4168 is a aqueous dispersion, vinyl resins-based adhesive. The adhesive film obtained is practically transparent. Meets grade d3. In the woodworking industry, furniture assembly, joinery and carpentry work, it is especially suitable for wood gluing and veneering on short cycle presses, hot plates, finger-joint and high frequency.

Interplastic Corporation PA-181-VHMN (vinyl ester) is a vinyl ester resin base for corrosion resistance and hydrolytic stability.

Interplastic Corporation PR-235-VHLN are ideal for industrial or construction markets that require fire resistance.

Winn & Coales International PVC OUTERWRAP is a heavy duty PVC in the form of a roll. The tape is used as an Outer Wrap for the mechanical protection of VISCOTAQ products against soil stress, back fill procedures and other forms of mechanical impact. Moreover, it gives a continuous external pressure to the VISCOTAQ corrosion preventive inner material and forces this material, together with eventual soil stress, continuously to flow. VISCOTAQ PVC Outer Wrap is produced from a High Quality PVC with an excellent resistance to chemicals and is wrapped with a 50% overlap onto the VISCOTAQ corrosion preventive coating. The material is applied onto the substrate by hand or by means of a tape wrap machine.

Arjay Technologies 7121 Vinyl Ester is specially formulated with Bisphenol-A based epoxy vinyl ester resin for superior physical properties when compared to polyester resins. This has made it the ideal choice for many marine applications where the bonds are structurally critical. It is best known for its critical bonding applications.

Spectrachem PL785 is the flexiverse orange plastisol ink. It comes in a variety of colors.

Interplastic Corporation PA-196-PHLN are ideal for industrial or construction markets that require fire resistance.

Crown Foam Technologies High Density Vinyl Foam 15#+ is characterized by exceptional cell structure which permits the foam to be used in aggressive environments that require internal strength paired with product durability. This vibration dampening, tear resistant foam seals out air dust and moisture while contouring to the required shape.

INDUSTRIA CHIMICA MEDITERRANEA Medivil 99 Mar is a transparent film with vinyl adhesives in water dispersion which meets EN 204/205-D3 standards for gluing lamellar and blockboard.

Fusion Modified Vinyl Ester Adhesive is a blend of Vinyl Ester and Modified Acrylic adhesive technology. It is perfect for seaming, mitering, laminating and chip repair. It can be used with natural stone, engineered stone, sintered, ultra-compact and other dense material. Superior FUSION has enhanced color/clarity excellent for color matching all colors and substrates.

PLT1 is used for ABS, SAN, polycarbonate, treated polyester, paper, cardboard, wood. Do not use for polyolefins and polymethacrylates. Particularly suitable for rigid and soft PVC and polystyrene.

Poly-Epoxy Modified Polyester / Vinyl Ester Adhesive utilizes both polyester and vinyl ester adhesive technology providing stronger bonds than standard polyester formulas. Ideal for seaming, laminating and chip repair for all types of natural stone including dense granite.

C.B.Frost & Co. CBF-812 is a closed cell PVC sponge with good acoustic sound properties, ozone & UV properties. It is CFC, HCFC and VOC free, resistant to solvents and available in various colors and food safe grades.

Pro® 17 is an embossed anti-slip PVC that has been engineered with an aggressive adhesive system to adhere to a wide variety of surfaces.

Capitol Adhesives VA380 Premium Vinyl Composition Tile Adhesive dries clear so that chalk lines are visible for easy installation and alignment of tiles. VA380 Premium Vinyl Composition Tile Adhesive is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

Paramol is designed to be both a sealer and bonding agent for interior applications of the Param 5500. Paramol is a concentrated re-emulsifiable adhesive specifically designed to enhance the bond of the Param 5500 providing maximum adhesion and seal between the substrate and the self-leveling concrete.

Crown General PVC-foam D.170/200QR is medium quick recovery foam has an open cell structure and can be used for various applications as a cost-effective and high quality foam solution. This foam recovers instantly after compression and is mainly used as air and dust seal. This medium density foam is available in different thicknesses, colors and with special options.

Buckeye Fabric Finishing Excello is a water, weather, mildew and flame resistant PVC coating applied to cotton ducks and poly/cotton blends. It’s not recommended for single-fill cotton fabrics. This durable finish can be used indoors or out and is available in a variety of colors. For added water repellency a topcoat can be applied over the Excello finish.

Eternal Materials 2968PT-689 Series is vinyl ester based structural adhesive.

Spectrachem PL782 is a golden yellow plastisol ink that is flexiverse.

Crown General PVC-foam D.130/160QR is a medium-soft quick recovery foam has an open cell structure and can be used for various applications. This foam recovers instantly after compression and is mainly used as air and dust seal. This low density foam is available in different thicknesses, colors and with special options.

Orgal® P 671 is Vinyl Acetate-Acrylic Copolymer.

DuroAcro® DP924 is a vinyl acetate homopolymer.

Intec Foams PVC Foam - VP100 is a soft, low density and flexible closed cell foam which is conformable and HF (High Frequency) weldable. VP100 has a PVC Vinyl foam of low density (100Kg/m3) with a skin on both sides.

Orgal® P 526 is a Vinyl Acetate-Vinyl Versatate Copolymer.

K Bond Vivid Knife Grade is a premium quality, low color Vinyl Ester stone adhesive. K-Bond VIVID is a corrosion-resistant, ultra-fast curing, high adhesion adhesive. For use with natural stone, quartz, ceramics, porcelains and dense surfacing material. Perfect for application with light or white substrates. Uses include bonding, laminating, miters, installation of pieces, and repairs.

Blome International CP-105AR is a two-component vinyl ester mortar that utilizes unique fillers for enhanced performance in abrasive slurries and alkaline environments. Blome CP-105 AR offers high bond strength to brick and tile combined with excellent resistance to oxidizing acids and alkalis. The materials’ inherent bond strength also provides an exceptionally high bond of resin to aggregate resulting in outstanding resistance to wear and erosion in applications exposed to both harsh chemicals and constant flow of pulp, ore slurries, limestone slurries, or other abrasive media.

Spectrachem PL715 is a white plastisol ink ex.

3F North America PVC Foam Tape, One-Sided Self-Adhesive 80000 has the characteristics of a PVC foam carrier in a variety of thicknesses, as well as high elasticity and restoring forces.

Crown General PVC-foam D.320/350ST is our very high density foam can be used for various applications (anti-fatigue mats, vibration damping, mounting tape) as a cost-effective and high quality foam solution. This very high density foam is available in different thicknesses, colors and with special options.

Foamalux Eco PVC foam product has up to 80% reclaimed post-production waste content, reducing landfill and making it our greenest choice of foam PVC. Black is the new green with Foamalux Eco.Its quality, flawlessness and versatility offers the designer unlimited application possibilities in the creation of interiors, shop outfitting, signage, contemporary displays, product design and fabrication.