Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Method
- Automatic application by roller and injector or by brush.
- The surfaces to be bonded should be free of dust and grease and should fit perfectly.
- Apply a thin and uniform layer of adhesive to one of the parts and compress them within the open time until sufficient initial adhesion has been achieved.
- Bonding is maximum about 48 hours after pressing.
Properties
- Color
- Physical Form
- Characteristics
- Note
Ideal Working Conditions - bearing in mind that the given parameters depend greatly on the working conditions and the materials to be glued:
| Value | Units | Test Method / Conditions | |
| Viscosity (Brookfield RVTD-Spindle 6, 20 rpm, 20°C) | 11000 - 13000 | cPs | ME 006 |
| Solids Content | 49 - 51 | % | ME 007 |
| Density | 1.03 - 1.09 | g/cm³ | ME 009 |
| pH | 3 - 5 | - | ME 018 |
| Adhesive Temperature | 15 - 25 | °C | - |
| Wood Humidity | 7 - 12 | % | - |
| Pressure | 25 | Kgf/cm² | - |
| Amount of Adhesive (Normal Bonding) | 160 - 180 | g/m² | - |
| Amount of Adhesive (Short Cycle Press) | 220 - 280 | g/m² | - |
| Open Time (Normal Bonding) | 10 - 15 | minutes | - |
| Open Time (Short Cycle Press) | max. 6 | minutes | - |
| Pressing Time (Normal Bonding) | 8 | hrs | - |
| Pressing Time (Short Cycle Press) | 3 | minutes | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Information
20 / 70 / 120 / 1000 (in Kg)
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
This product must be kept in a well-ventilated place, in its original package well closed, protected from humidity and solar rays, and at temperatures between 15 and 25 ºC. In these conditions the product is valid for 6 months.