Products in Adhesives & Sealants: Polyesters

Laricol 1465 is a thermoplastic reactivable adhesive made from polyester-based thermoplastic polyurethane. It is available in the form of white pellets. This type of adhesive is designed to be reactivated upon the application of heat, providing a convenient and effective bonding solution in various applications.

Crestafix® 90-82PA HP Polyester Bonding Paste is a pre-accelerated polyester bonding paste. It is a viscous, white, and filled compound specifically designed for the assembly and bonding of GRP moldings, including panels, inserts, internal frames, ribs, composite constructions, and car body components. It is a high-productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crestafix® 90-79PA Polyester Bonding Paste is a pre-accelerated orthopthalic polyester bonding paste. They are non-sagging-filled compounds especially designed for the assembly and bonding of GRP moldings. Such applications include panels, inserts, internal frames, ribs, and any other non-structural bonding applications.

Crestafix® 90-84PAHV Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound designed for non-structural applications where gap filling may be a secondary requirement. It offers no sagging on vertical surfaces and is highly thixotropic.

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.

Interplastic Corporation PA-176-PMMF is a isophthalic adhesive designed for resistance to fuels.

Interplastic Corporation PA-170-PMHN is a high density polyester isophthalic adhesive.

Interplastic Corporation PA-150-PHHN (general purpose) has a high density polyester adhesive.

Arjay Technologies 4001 Core Bonding possesses flexible gel times.

K-Bond Polyester Transparent Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces, and repairs.

Eternal Materials 2976PT is an unsaturated polyester based structural adhesive.

K-Bond Polyester Buff Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

ONE-WAY 2M is a ultra-thin, strong, linear polyester polyurethane biased splicing tape for use on abrasive belt butt splices with E and F weight paper backings.

DBF Lite is designed for use when fast pot life is required. It is also designed so that it can be spread smoothly and can be sanded and shaped for several days. DBF Lite is a great plug filler for marine or automotive dent repair and many other uses.

Detroit Body Filler 60238-50 a non-flowing, pumpable adhesive. 60238-50 should be used for bonding, fairing, filling, and radius applications. This product is designed to have good vertical hang and stack abilities but maintains high flow volumes. 60238-50 is designed to provide a product with an eight-pound weight/gallon with excellent adhesive properties. Gel times can be varied for specific customer needs.

ARON MELT® PES310S30 is a collection of thermoplastic polyester hot melt adhesives. They offer excellent durability, and are designed with various resin properties by combinations of monomers.

Superior Water‐Clear Polyester adhesives are used for laminating and seaming natural stone including light colored marbles such as white marble. Cured with 1%‐2% clear liquid hardener (MEKP), these adhesives have a gel time of 10‐20 minutes and are fully cured in 2‐4 hours. Shelf life of this product at room temperature averages about one year. Available in Flowing and Knife Grade.

Detroit Body Filler 60700 is a flexible, thixotropic polyester compound that spreads smoothly for ease of application. This product is designed be used where high heat distortion temperatures are required using Isophthalic resins. 60700 can be catalyzed with MEK Peroxide or BPO paste. It is an excellent fairing compound.

Nitoseal® PE290 three-component flexibilised polyester based sealant cures to form a tough resilient seal with a limited degree of movement. The material is self leveling and can be poured or gunned directly into horizontal slots. Nitoseal® PE290 will adhere to both concrete and asphalt surfaces that have been well prepared whether dry or damp.

ARON MELT® PES-120L is a collection of thermoplastic polyester hot melt adhesives. They offer excellent durability, and are designed with various resin properties by combinations of monomers.

K-Bond Polyester White Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Adhesive Films PAF-130 is used in plasticizers, home wash and dry clean applications.

Detroit Body Filler 72225 is a isophthalic, fiberglass reinforced, polyester adhesive. This material should be used where a bonding putty is required. It can also be used to radius, fill or for fairing. 72225 spreads and feathers smoothly.

Arjay Technologies 4501 J-Core is ultra-light weight which makes it the perfect compound for bonding hardtops and small part “sandwich” bonds.

Landor UK Phototex OPAQUE (OPAS) is 95% block-out media with a bright white coating that is compatible with pigment, water based, solvent, eco-solvent, latex, and UV- inks. (See below for specific compatibility with inks) Phototex OPAQUE/BLOCK-OUT gives you vivid, sharp print results with brilliant colors! The Adhesive is Re-movable, Re-usable and Re-positional. Phototex’s characteristics separate itself from all other products on the market when compared to vinyl or similar fabrics. It sticks to virtually any painted surface. The Opaque version is great for overlapping/paneling and hiding marked or bright colored walls (especially in the non-printed surfaces) The material does not rip or wrinkle and is not required to be removed over a certain period of time. Results will vary on stucco and eggshell painted surfaces (use our non-opaque Phototex EX/EXS High Tack version on these surfaces).

Adhesive Films PAF-110 is used in plasticizers, home wash and dry clean applications.

Shurtape Technologies DP 391 is used for mounting, bonding and fastening applications on a wide variety of substrates, including low surface energy plastics and coatings.

Detroit Body Filler RO61-46 is a low viscosity product, which has been developed to fill a need for an adhesive that will flow from a 55-gallon drum and can be thickened to a heavy paste after the adhesive has been removed from the drum and before it is applied to the part. After mixing in the MEK Peroxide catalyst, the addition of a small amount of water will thicken RO61-46.

Interplastic Corporation W-1316-PBLL is a very low density polyester adhesive designed for core bonding/bedding applications – including both vacuum bag and hand lay-up core installations. This material can be troweled or otherwise manually spread to cover large areas. W-1316-PBLL can be manually mixed and applied or can be pumped through standard putty dispensing equipment.

ONE-WAY 8 is an abrasion resistant, extra strong, linear polyester polyurethane biased splicing tape for use on abrasive belt butt splicing with heavy duty X and Y weight cotton and polyester backings.

ONE-WAY 4 is an excellent general purpose, linear polyester polyurethane biased splicing tape for use on abrasive belt butt splices with medium grit X weight cotton, poly-cotton and polyester backings.

Landor UK Phototex is the original version of Phototex. Coating can be printed with Aqueous, UV or Latex Inks.

K-Bond Polyester Buff Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Bronze Choice Polyester Adhesive is a polyester stone adhesive providing Superior quality and is economically priced to reduce your overall material costs. These adhesives provide extremely strong bonding with a fast cure time. Tack‐Free curing prolongs the life of your polishing pads. Superior BRONZE is ideal for rodding, seaming and laminating porous natural stone. These adhesives can easily be colored with Superior Coloring Paste and are economically priced. This product is available in Flowing and Knife Grade. It can be cured with 2%‐4% white paste hardener (BPO) and are fully cured in less than 25 minutes. It is an excellent choice for indoor applications.

Detroit Body Filler 60138 Brushable is a low viscosity, flowable adhesive. 60138 Brushable can be used for bonding, fairing, filling, radius, and bedding applications.

Nitto Denko Corporation Flame-retardant polyester adhesive tape No. 3161FR2 is used for outer/interlaminar insulation of transformers and coils.