Products in Fluids & Lubricants: Drilling Fluids

MultiTech Degreaser A is a hydrogenated naphtha-kerosene cut with a typical distillation range of 240-270ºC. It has a very low aromatic content, with a low penetration smell.

MultiTech Multifunctional D optimizes the performance of alkyd-based paint and coating formulations by preventing surface skin formation due to contact with atmospheric oxygen when, between uses, such formulations sit in containers. MultiTech Multifunctional D is a breakthrough product that offers a safe, cost-effective replacement for MEKO, typically with equal efficacy and compatibility with other components in such formulations. With EU-REACH certification and low-toxicity, MultiTech Multifunctional D is ideal for paints and coatings producers looking to reformulate high-performance alkyd-based systems post ECHAs reclassification of MEKO as a Carcinogen 1B substance on March 1, 2022.

ONYXIDE® 200 is a highly active bacteriocide and fungicide. It is a preservative for use in metalworking cutting fluids, gas and oil drilling muds and packer fluids, oil field drilling, completion and fracturing fluids, industrial adhesives, emulsions, and inks (non-food use).

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial appli

SILFOAM® SE 4260 is a silicone antifoam emulsion specifically designed for use in cold climates. It exhibits exceptional frost stability and can be applied at temperatures below 0°C. This versatile product finds application in various industries, with a particular focus on the oil and gas sector for drilling fluids. SILFOAM® SE 4260 serves as an internal antifoam agent in drilling fluids to effectively control foam. Additionally, it can be used as a defoamer for on-demand additions.

EZ-Blox® optimizes the performance of alkyd-based paint and coating formulations by preventing surface skin formation due to contact with atmospheric oxygen when, between uses, such formulations sit in containers. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, typically with equal efficacy and compatibility with other components in such formulations. With EU-REACH certification and low-toxicity, EZ-Blox® is ideal for paints and coatings producers looking to reformulate high-performance alkyd-based systems post ECHA’s reclassification of MEKO as a Carcinogen 1B substance on March 1, 2022.

AG 6202 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

PETREPAR® n-C10 is a linear alkane hydrocarbon with a content exceeding 95% in n-decane. This substance has diverse applications, serving as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. It is characterized by its degreasing capabilities and high solvency. It is prevalent in markets related to agriculture and feed, HI&I care, industrial care, and personal care.

PETROSOL D 40 is a hydrogenated naphtha-kerosene blend featuring a typical distillation range between 150 and 200°C. This product boasts an exceptionally low aromatic content and a barely discernible odor. Due to its minimal aromatic content and nearly odorless nature, PETROSOL D 40 finds application in various industries, including paint and varnish production, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, home air fresheners, and as an effective degreaser.

PETROSOL D 60 is a hydrogenated naphtha-kerosene blend featuring a typical distillation range of 190–220 °C. This product is distinguished by its remarkably low aromatic content and faint odor. Due to its low aromatic content and almost imperceptible scent, it serves various purposes, such as in the production of paints and varnishes, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, and home air fresheners, as well as an effective degreaser.

PETREPAR® n-C14 is a linear alkane hydrocarbon with a content exceeding 97% in n-tetradecane. It has a range of direct applications, serving as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. Similar to n-C10, it is recognized for its degreasing capabilities and high solvency, with applications in the Agriculture & Feed, HI&I Care, Industrial, and Personal Care markets.

PETROSOL D 80 is a hydrogenated naphtha-kerosene blend with a typical flash point greater than or equal to 72ºC. It stands out for its low aromatic and sulfur content and faint odor. Just like its counterparts, PETROSOL D 80 is indispensable in various industries, including paint and varnish manufacturing, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, home air fresheners, and as an efficient degreaser.

PETROSOL D 100 is a hydrogenated naphtha-kerosene blend characterized by a typical distillation range of 240-270ºC. This product is recognized for its extremely low aromatic content and mild odor. Like PETROSOL D 60, its low aromatic content and subtle aroma make it a valuable asset in applications ranging from paint and varnish production to fuel, solvents, lubricants, drilling fluids, insecticides, home air fresheners, and degreasers.

PETREPAR® 145 is a linear alkane hydrocarbon featuring a C14-C15 chain with a content exceeding 98% in n-paraffins. This substance finds direct applications as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. Classified within the hydrocarbon chemical family, it is noted for its degreasing properties and high solvency, making it suitable for various applications.

DeCAL ERT 09 is a solvent-free, biodegradable alternative to mineral oil. It retains all the properties of natural rapeseed oil and is readily emulsified by adding water and agitating. DeCAL ERT 09 is also suitable for use as the base oil in many lubricants, including cutting fluids, rolling/metalworking oils, drilling muds, two-stroke oil, greases, wire drawing, and chainsaw lubricants.

Pangel B10 is a powdered additive with a high thickening and anti-settling capacity for intermediate-low polarity systems, particularly recommended for systems based on white spirit type solvents. The dispersion process of Pangel B10 is similar to that of other solid components of the formulation, being necessary to ensure appropriate product wetting and the application of sufficient mechanical energy (shear). Equipment such as cowles, dissolvers, silverson types, colloidal mills, horizontal, vertical, and basket grinding equipment are enough to obtain a good dispersion.

grotan® OX is an innovative biocide that offers outstanding performance at low doses for greater cost-efficiency. Suitable for water-mixed metalworking fluids, metalworking fluid concentrates, and other technical emulsions, it provides good anti-corrosion properties. Effective against bacteria, yeasts, and mold, it features a broad, balanced spectrum, including sulfate-reducing bacteria, with good immediate effects. grotan® OX contains no nitrate, nitrosing agents, or organically bound chlorine, ensuring no impact on the AOX value. It is used in preserving products during storage, liquid-cooling and processing systems, slimicides, and working or cutting fluid preservatives.

Desilube 98F is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Florigiel® HY rheology modifier is highly desired for use in oil well drilling mud, slurry trench walls and other geotechnical applications for its excellent stability in a salt or high ionic environment. It serves as an essential thixotropic thickener and suspension agent and meets API Specification 13A/ISO 13500.

Desilube 88 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube 77 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube 99L is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Calsia™ 100 which are normal/isoalkane drilling mud based fluids that begin with a severe hydrocracking and hydroisomerization process. Calsia Drilling Fluids are available in a wide range of specifications for various drilling applications. Calsia Drilling Fluids are an ideal solution for delivering an environmentally responsible drilling mud base fluid that does not compromise performance.

BT DES is di-ethylhexyl sebacate and it applied in Corrosion inhibitor, Corrosion protection for steel and it have high thermal stability.

Calsia™ 80 which are normal/isoalkane drilling mud based fluids that begin with a severe hydrocracking and hydroisomerization process. Calsia Drilling Fluids are available in a wide range of specifications for various drilling applications. Calsia Drilling Fluids are an ideal solution for delivering an environmentally responsible drilling mud base fluid that does not compromise performance.

Calsia™ 70 which are normal/isoalkane drilling mud based fluids that begin with a severe hydrocracking and hydroisomerization process. Calsia Drilling Fluids are available in a wide range of specifications for various drilling applications. Calsia Drilling Fluids are an ideal solution for delivering an environmentally responsible drilling mud base fluid that does not compromise performance.

Calsia™ 96 which are normal/isoalkane drilling mud based fluids that begin with a severe hydrocracking and hydroisomerization process. Calsia Drilling Fluids are available in a wide range of specifications for various drilling applications. Calsia Drilling Fluids are an ideal solution for delivering an environmentally responsible drilling mud base fluid that does not compromise performance.

BT BHI is bis-hydroxyl imidazoline (based on ricinoleic acid) and applied in Corrosion inhibitor-MWF’S, Emulsifier for oil-based drilling muds and Excellent corrosion inhibition for high oil containing products.

NA-LUBE® AW-6220 is an ashless antiwear additive with excellent rust and corrosion inhibition and yellow metal deactivation properties.

Calsia™ 62 which are normal/isoalkane drilling mud based fluids that begin with a severe hydrocracking and hydroisomerization process. Calsia Drilling Fluids are available in a wide range of specifications for various drilling applications. Calsia Drilling Fluids are an ideal solution for delivering an environmentally responsible drilling mud base fluid that does not compromise performance.

PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a multi-functional additive. It can be used as an effective anti-static agent, wetting agent for coatings and adhesives, and as a quat emulsifier for drilling fluid.

Ven-Fyber Coarse™ is a premium blend of micronized, surface-modified organic fibers for the prevention and remediation of whole fluid losses in drilling fluid applications. Ven-Fyber Coarse™ is field proven around the world for the prevention of moderate, severe & whole fluid losses. Ven-Fyber Coarse™ is composed of a blend of differing types of surface modified micronized cellulosic fibers. The differing types and sizes of the source materials provide excellent bridging and matting of thief zones in the near well-bore formation for effective sealing and prevention of whole fluid losses.

This severely hydrotreated mineral oil has a very low aromatic content, excellent solvency, and excellent color with resistance to discoloration by heat or ultraviolet light.