Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- Key Benefits
- Long-lasting results.
- Effective against bacteria, molds and yeasts.
- No foam formation.
- Fully soluble in oil and water.
- Anti-corrosive properties.
- High stability at high and low temperatures.
- Solvent-free.
- Wide pH range tolerance.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Application pH Range
- 8 - 11
- Use Level
- 2.0 - 4.0 % (metal working fluids concentrate), 0.02 - 0.04 % (water-mixed MWFs / tankside)
- Dosage Information
Fields of Application:
The optimum use level should be evaluated by means of a repeated challenge test (e.g. at Vink Technical support department).
Fields of Application (Preservative for technical products) Recommended Dosage Water miscible metalworking fluids 1.0 - 1.5 g/kg (0.10 - 0.15 %) Technical emulsions 1.0 - 1.5 g/kg (0.10 - 0.15 %) Metalworking fluids concentrates 20 - 40 g/kg (2.0 - 4.0 %) System cleaner [1.0 - 1.5 g/kg (0.10 - 0.15 %) in
the end dilutions)]100 - 150 g/kg (10 - 15 %) Preservation of drilling fluids, completion and hydrotest fluids, work over and packer fluids, injection and produced water, biopolymers in EOR, gas storage facilities and MIC prevention of pipe lines.
Fields of Applications (Preservative for oil and gas applications) Recommended Dosage Drilling fluids, completion, hydrotest, work over
and packer fluids0.3 - 1.5 kg/m3 (300 - 1500 ppm) Injection and produced water, biopolymers in
EOR, gas storage, pipeline treatment0.3 - 0.75 kg/m3
per Batch treatment(300 - 750 ppm) Injection and produced water, biopolymers in
EOR, gas storage, pipeline treatment0.05 - 0.3 kg/m3
continuously(50 - 300 ppm) - Indications for Use
General Information:
- grotan® OX is suitable for use in water-mixed metalworking fluids, metalworking fluid concentrates and other technical emulsions.
- grotan® OX is suitable to protect drilling fluids and other water based systems in oil and gas production systems against microbial contamination and corrosion. The dosing should be applied by using dosing pumps either in the water or in the oil phase.
Solubility(ies): Fully soluble in most polar organic solvents.
Additional Advice:
- In order to avoid microbial growth and the resultant consumption of preservative from the outset, it is advisable to add grotan® OX to the fresh mix of metalworking fluid.
- More can be added at weekly to fortnightly intervals depending on the diskharge of the metalworking fluid.
- When adding grotan® OX , it should be added at a point with good turbulence in order to ensure good distribution in the system.
- Before refilling the plant, system cleaning is recommended (e.g. with grotanol®).
- The removal of larger biofilms should be done with priority mechanically or by pigging or in a combination of biocidal treatment and suitable cleaning with a system cleaner such as grotanol® NOS.
- Compatibility Information
Compatibility Compatible To be avoided Concentrate Stainless steel, Steel, Polypropylene, Polyethylene,
Polytetrafluoroethylene (PTFE), Polyamide (PA 11)Sealants and Plastics other than mentioned, PVC
(hard)Aqueous dilution (0.15 %) No significant difference to water Water incompatible materials Further Information On contact with non-ferrous metal or non-ferrous metal containing alloys, diskolorations of the surface wetted with grotan® OX can occur.if the coolants do not contain a non-ferrous corrosion inhibitor. When used in a system with non-ferrous metal with dosage higher than 50 ppm add a copper inhibitor. From the available test results, it can be concluded that the addition of grotan® OX has virtually no influence on the medium to be preserved. - Product Applications
Recommended for upstream and midstream applications such as:
- Drilling
- Injection Water / EOR
- Produced Water
- Crude Oil Treatment
- Terminal Storage
Properties
- Color (Properties)
- Physical Form
- Appearance
- Colorless light yellow liquid
- Odor
- Amine like
- Soluble in
- Water, Oil
- Minimum Inhibition Concentration
Value Units Test Method / Conditions Escherichia coli* 0.062 % - Pseudomonas aeruginosa* 0.062 % - Pseudomonas fluorescens* 0.031 % - Staphylococcus aureus* 0.062 % - Desulfovibrio desulfuricans* 0.031 % - Candida albicans* 0.031 % - Aspergillus brasiliensis* 0.062 % - Penicillium funiculosum* 0.031 % - - Technical Data
Value Units Test Method / Conditions Manufacturing Temperature max. 80 °C - - Physico-Chemical Properties
Value Units Test Method / Conditions Density (at 20°C) 1.049 - 1.069 g/mL - Refractive Index (at 20°C) 1.469 - 1.479 - - Melting Point/Range max. (- 35) °C - Pour Point -39.0 °C - Boiling Temperature approx. 204 °C - Flash Point min. 100 °C ISO 2719 Flow Time (at 20°C) max. 15 seconds DIN 53211 Viscosity (at -10°C) 176.0 mPa.s OECD Test Guideline 114 Viscosity (at 20°C) 19.0 mPa.s OECD Test Guideline 114 Viscosity (at 40°C) 8.0 mPa.s OECD Test Guideline 114 Volatile Organic Compounds 100.0 % Directive 2004/42/EG pH (1.5 g/L) approx. 10 - - - Note
* - The efficacy of the product has been tested against the following microorganisms according to DGHM (German Society for Hygiene and Microbiology). Determination of the minimum inhibitory concentration in the serial dilution test produced the following values (MIC in % of the product)
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
Safety & Health
- Environmental Information
- The 10 kg and 25 kg containers and 200 kg drums used by Vink are made of polyethylene (HDPE) and are labeled accordingly.
- The 1000 kg containers are affiliated to a recycling system that guarantees free pick-up and sensible utilization of used containers throughout Europe.
- The labels are made of polyethylene (PE).
- Our packaging materials contain no PVC, and are recyclable.
- Samples of our products are supplied together with extensive information and are supported by personal advice.
Packaging & Availability
- Packaging Type
- Packaging Information
- Dangerous goods: Yes
- UN number: 2922
- Packaging group: II
- Packaging sizes: 10 kg, 200 kg, 1000 kg
Storage & Handling
- Shelf Life
- 36 months
- Storage Conditions
- Protect from frost, heat and sunlight.
- Store at room temperature in the original container.