Products in Additives: Metalworking Fluids

DiTech Nonionic Surfactant B a nonionic reverse EO/PO block copolymer that exhibits fast-breaking, low foaming, and defoaming properties that can be used in lubricants in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricant, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

MultiTech Corrosion Inhibitor A is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

MultiTech Multifunctional E is a colorless liquid at room temperature (20°C). It is miscible in water and organic solvents. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers Piperidine

DiTech Dye is a water-soluble fluorescent yellow dye designed for use in industrial, hard surface, & multipurpose cleaners, foaming car wash soaps and waxes, metal working fluids, antifreeze and coolants, water-based adhesives, water tracing applications, and leak detection applications.

Multitech Microbial Control Agent A is a broad spectrum biocide for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is a 10% aqueous propylene glycol solution of 1,2-benzisothiazolin-3-one.

DiTech MultiFunctional E is a water-soluble emollient prepared from derivatized coconut oil. This material acts as a surfactant yet has a moisturizing effect due to its refatting properties. It is ideally suited for use in haircare and bath products where its luxurious afterfeel combined with its solubilization and emulsification properties are best employed. It is manufactured in USA.

MultiTech MultiFunctional M is a polyalkylen glycol, based on glycerol and ethylene oxide (7,5 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

MultiTech Multifunctional F is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. MultiTech Multifunctional F has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important. MultiTech Multifunctional F has 93% recycle content.

MAKON® 17R2 is a nonionic reverse eo/po block copolymer renowned for its fast-breaking, low-foaming, and defoaming attributes. It finds application across diverse industries, including industrial, institutional, pulp and paper, textiles, paints and coatings, and more. Its usage is relevant in metalworking fluids, defoamers, dispersants, industrial lubricants, plasticizers, pulp and paper processing, rinse aids, and textile processing. As with other products in the makon® range, it is a low-ash product.

MAKON® 8 serves similarly to makon® 12, functioning as a high-active nonionic surfactant with versatile applications. Its use spans agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Just like MAKON® 8's counterpart, it holds kosher certification.

STEPAN® MWA-263 is a nonionic reverse eo/po block copolymer that exhibits fast-breaking, low foaming, and defoaming properties that can be used in lubricants in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

STEPAN® MWA-160 is a powder sodium lauryl sulfate product for use in metalworking applications. It is used in the emulsification of components and can enable improved performance in metal cleaning. It can also be used to efficiently remove oil from metal surfaces.

DREWPLAST® 154 is a nonionic surfactant that serves as a release agent and antistatic agent for plastics and films. Its chemical group aligns with lauramide dea, and it functions as a textile antistatic agent. Notably, the product is derived from plants and is bio-based.

STEPAN® MWA-210 is a nonylphenol ethoxylate that can be used as an emulsifier and coupling agent for metalworking formulations, either alone or in combination with other surfactants. It can enable improved performance in metal cleaning in metalworking applications and can be used to efficiently remove oil residue from metal surfaces.

STEPAN® MWA-262 is a polyalkylene glycol that can be used as an emulsifier and lubricant in synthetic and semi-synthetic metalworking fluids. This nonionic surfactant can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

STEPAN® MWA-310 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values. It can improve corrosion inhibition and also provide protection for aluminum.

BIO-SOFT® N91-2.5 is a c9-11 linear alcohol ethoxylate featuring a low hlb. This versatile product offers rapid wetting, low foam, emulsification, and detergency. Its applications span laundry, textiles, hard surface cleaning, machine-based cleaning, paints, carpet cleaning, and institutional and industrial cleaning contexts.

STEPAN® MWA-260 is a biodegradable, nonionic surfactant that exhibits low foaming properties and excellent wetting action. It resists foam development even under extreme or prolonged agitation and is non-foaming above 25°c. It can be used as an emulsifier and lubricant in synthetic and semi-synthetic metalworking fluids. And can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

BIO-SOFT® N91-8 is a c9-11 linear alcohol ethoxylate with an hlb of 13.9, suitable for oil-in-water formulations. It offers fast wetting and high foam, even in high-temperature cleaning, due to its elevated cloud point. With applications spanning laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning, it complies with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

BIO-SOFT® N25-12 is a c12-15 linear alcohol ethoxylate with moderate wetting and moderate foam. It also provides emulsification, detergency, and excellent wetting. It can be used in laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial applications. The product is kosher-certified and preservative-free.

MAKON® 12 functions as a high-active nonionic surfactant of great utility across agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. MAKON® 12's role encompasses being an emulsifier, adjuvant, and wetting agent. The product bears kosher certification.

BIO-TERGE® PAS-8S is a low-foaming anionic surfactant with excellent coupling and wetting properties. Its versatility shines in formulating hi&i cleaners, covering areas like hard surface cleaning, carpet cleaning, machine dishwashing, and glass cleaning. Its compliance with the u.S. Epa safer choice program and cleangredients.Org adds to its appeal.

BIO-SOFT® N1-9 is a c11 linear alcohol ethoxylate with a high hlb, strong water solubility, and high cloud point, making it well-suited for general-purpose cleaning and fragrance solubilization. It offers emulsification, moderate to high foam, detergency, and moderate to fast wetting. Like other mentioned products, it complies with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEPAN® MWA-502 can be used as either a solvent or cosolvent in metalworking, die casting, and metal forming processes. It combines excellent characteristics of cleanliness, low odor, high flash point, and good film-forming properties. It can be used as a non-staining additive for metal forming or metal removal operations on ferrous and non-ferrous metals.

BIO-TERGE® PAS 7S is an anionic surfactant characterized by low foaming, excellent coupling properties, and good wetting. It's highly versatile and can be used to formulate various industrial and institutional (i&i) cleaners, such as carpet cleaners, hard surface cleaners, and machine dishwashing detergents.

STEPAN® MWA-200 is a polyoxyethylated castor oil that can be used as an emulsifier and as a coupling agent for metalworking formulations. It can be used alone or in combination with other surfactants. It can enable improved performance in metal cleaning in metalworking applications. It can be used to efficiently remove oil residue from metal surfaces.

STEPAN® MWA-551 is a pentaerythritol tetra c8-10 that can be used for metalworking formulations in synthetic and semi-synthetic lubricants in high-temperature applications and for improved lubrication properties. It can act as a stand-alone chlorinated paraffin replacement or be combined with phosphate esters to offer further enhancement. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

MAKON® 14 functions as a high-active nonionic surfactant with diverse applications, including agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. MAKON® 14's roles encompass being an emulsifier, adjuvant, and wetting agent. The product holds kosher certification.

BIO-SOFT® N1-5 is a c11 linear alcohol ethoxylate with a low pour point that provides fast wetting, detergency, and low to moderate foam. This product finds application in laundry detergents, textiles, paint, and hi&i cleaning applications. The product is kosher-certified and preservative-free.

BIO-SOFT® N1-7 is a c11 linear alcohol ethoxylate delivering fast wetting, moderate to high foam, emulsification abilities, and effective detergency. Its application spans laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It meets the u.S. Epa safer choice program's surfactant screen and cleangredients listing, ensuring environmental and safety compliance.

STEPAN® MWA-180 is an anionic surfactant used in the emulsification of components and can enable improved performance in metal cleaning in metalworking applications. This ammonium laureth sulfate can be used to efficiently remove oil residue from metal surfaces. It is kosher-certified.

MAKON® 30 is an all-high-active nonionic surfactant with diverse applications, including agriculture, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Their chemical group is nonylphenol etheroxylates, and they serve as emulsifiers, adjuvants, and wetting agents. This product is kosher-certified.

MAKON® 10 is a high-active nonionic surfactant with applications in various fields, including agriculture, detergents, sanitizers, industrial cleaners, metal cleaners, textile applications, and paper deinking. It belongs to the category of nonylphenol ethoxylates and serves as an emulsifier, adjuvant, and wetting agent. This product is kosher-certified.

STEPAN® MWA-501 is a methyl ester that can be used as either a solvent or a cosolvent in metalworking, die casting, and metal forming processes. It provides excellent film-forming properties and lubricity in straight oil, semi-synthetic, and full synthetic metalworking fluids. It is a non-staining product and has shown excellent results in metal-forming fluids as well as metal removal operations.

BIO-TERGE® PAS-8S E is a high-quality, light-colored, aqueous solution of primary alkane sulfonate, known for its low-foaming, biodegradable anionic surfactant properties. It offers excellent coupling and hydrotropic properties across a wide pH range. With exceptional solubility in acidic and alkaline systems, it's versatile for formulating industrial and institutional cleaners, ensuring compatibility with detergent builders and bleach.