Products in Reinforcements: Compression Molding

Composite Materials Reinforcement B is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

ampliTex™ 5009 is a Non-crimp unidirectional flax fabric with fibers oriented at 0°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact.

StarStran® BMC cut fibers 991 CS EC 13 991 (51mm) long cut fibers are produced of E-glass fibers with fixed lengths. These short fibers LCF 991 are coated with a chemical size layer. The recommended field of application is carding /needling, air-laying process as well as the insulation of ovens. Resin-compatibility: PP, PA, polyester and further technical polymers.

3B Fiberglass DS 1128-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical proper-ties, excellent hydrolysis/glycolysis resistance, high heat aging resis-tance and no sensitivity to mold release agents commonly used, such as calcium stearate. It can also reinforce and offer excellent perfor-mances in all impact modified and flame retardant polyamide formula-tions. An innovative manufacturing technology provides DS 1128-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits ex-cellent feeding properties with very low fuzz generation.The product is also designed for use in pneumatic conveying system and high throughput compounding line.

Conductive Composites Nickel Coated Fibers - Precision Chopped (PCF) has developed a proprietary Chemical Vapor Deposition (CVD) coating process where fibers are coated with a very thin, robust, and ductile film of pure nickel. Our process produces a conductive fiber with superior handling properties and excellent conductivity/shielding capabilities. Through a Precision Converting Process, these fibers are converted into short, precise, millimeter and sub-millimeter coated fiber lengths. This provides our customers and partners with a high-performance structural and conductive additive that is both lighter and longer than typical nickel coated graphite powder. Due to their precise lengths and easy dispersion, precision chopped fibers are very effective and economical as a conductive additive for paints, gaskets, sealants, molding compounds, and adhesives.

C10004034T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

This veil is a very conformable continuous glass fiber surfacing veil comprised of highly uniform, randomly distributed filaments bonded with special formulated resins. The veil provides excellent surface appearance on glass reinforced plastic composite parts and also has outstanding corrosion resistance properties. This veil is available for purchase in LAYER-PAK® format.

3B Fiberglass 108F-14P is specifically designed to reinforce polycarbonate PC compounds with low glass fiber loading (5-15%).Its unique sizing technology results in exceptional performances in terms of dimensional stability, dispersion, mechanical properties and color. This product is not sensitive to flame retardant additives. 108F-14P is also very effective for the reinforcement of PVC resins. An innovative manufacturing technology provides 108F-14P with a very good strand integrity and bulk density. As a result, this product exhibits very good feeding properties with low fuzz generation compared to other glass fiber materials.

G-TEX M 200 is Nonwoven fabric made from recycled carbon fiber. 200 denotes the fabric areal weight in gsm.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ampliTex™ 5008 is a Non-crimp biaxial flax fabric with fibers oriented at +45° and -45°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact.

440 Assembled Panel Roving for SMC are compatible with UP and VE. They deliver properties of good choppability and dispersion, low fuzz, good we-out and good antistatic performance.

C10004017T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

This reinforcing mat is a continuous-filament product, which is treated with a suitable bonding resin and coupling agent. It has good handling properties, resists wash in the mold, has good porosity, fast wet through, exceptionally good formability, weight uniformity, and uniform strand integrity.

P02 Powder Chopped Strand Mat is made of randomly distributed chopped E6 glass strands held together by an powder binder. P02 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. P02 is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts, chemical corrosion resistant pipes, tanks, cooling towers and building components.

SAFILIN Low Twist Roving Tex200 materials are used in technical applications and composite with high mechanical performance for the automotive industry, sport and leisure, construction, aviation and rail transport, consumption goods and design.

G-TEX TM SM45 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.

G-TEX M 1200 is Nonwoven fabric made from recycled carbon fiber. 1200 denotes the fabric width in mm.

G-TEX TM 1200 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. 1200 denotes the fabric width in mm.

This is a family of continuous filament reinforcing mats designed for phenolic pultrusion processes. They are treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity.

FlexForm® MT is used in a contact oven with optional forced hot air preheat, for 3D applications. Available in roll goods or sheets. Made from Bast Fibers, an annually grown crop unlike wood products that take years to replace and fiber glass that is destructive to the environment, difficult to handle and uses significant fossil fuels to produce.

C10004068T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

Muehlmeier E-glass mat E-CSM- emulsion bonded consists of cut and non-oriented E-CR glass strands, which have silane size. The binding of the strands amongst each other happens by a liquid mat binder on PVAc base which is easily soluble in styrene. Working happens in the well known contact- and continuous processes. The mat is suitable for UP, EP and vinyl ester resins. Compared to E-glass E-CR glass has excellent resistance against chemical and thermal influences and also a higher dielectric strength.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

3B Fiberglass 122Y-14P is designed to reinforce polycarbonate PC compounds and blends, where specific adhesion with the thermoplastic resin is required (glass fiber loading > 15%). The product also brings excellent reinforcement properties in polyphenylene oxide PPO or polyphelylene ether PPE resins.Due to its specific sizing chemistry, 122Y-14P offers an excellent compromise between high dry as molded performances and white color. It also has a very good compatibility with common flame retardant packages. An innovative manufacturing technology provides 122Y-14P with an excellent strand integrity and bulk density. As a result this product exhibits excellent feeding properties with very low fuzz generation.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ampliTex™ 5031 is a Bidirectional fabric with fibers oriented at 0° and 90°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact. ampliTex® 5031 has a very good drapability and is ideal for complex shapes. High laminate stiffness is obtained due to the low crimp satin weave.

ampliTex flax-carbon fusion UD tape is a non-crimp, 120 mm width, 170 gsm

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

powerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness. and damping properties of thin composite shells with little additional weight.

Blu Dot Asia CCF06EP is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

Blu Dot Asia CCF06HT is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.