Products in Honeycomb

Corex Polypropylene honeycomb is the idealcomponent for any lightweight assembly. It is extremely light but very strong. It provides high stability at a low weight and is resistant to both heat and corrosion.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Nomex® AHN-4120-3/16-1.5 is an Aerospace Grade Nomex® Honeycomb which exhibits high strength and toughness in a small cell, low density, non-metallic honeycomb. It is particularly noted for its corrosion resistance. This material is fire resistant and is typically used in transport aircraft construction where low O.S.U., smoke, and toxicity characteristics are a necessity. This material also exhibits good thermal insulation properties and also has good dielectic properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

Nidaplast 8FR are polypropylene honeycomb intended to serve as a core for structural sandwich panels. The nidaplast 8FR is an extruded polypropylene honeycomb with an approved halogen-free material that limits the spread of flames. (flammability according to UL94 standards: V2 classification)

Tubus Bauer GmbH PEI 4,0-64C is a tubus core made with Polyetherimide.

NOM-0585-50100-D is a aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from meta-aramid paper and coated with a heat resistant phenolic resin.

PAA-SDFH® PAA-SDFH® (Phosphoric Acid Anodized-Showa Double Flexible Honeycomb) 4.8-5052-47 is an aerospace grade 5052 aluminum honeycomb materials produced from phosphoric acid anodized aluminum sheets. Phosphoric acid anodize gives an excellent corrosion resistance to aluminum alloy, and the surface treatment system with a corrosion prohibited primer provide the greatest bondability and fatigue strength under critical conditions such as hot & wet condition. PAA-SDFH is available in two selections of core density and foil thickness.

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

MATLINE+ 201 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

Tubus Bauer GmbH PEI 4,0-75C is a tubus core made with Polyetherimide.

Aluminum Flex-Core® honeycomb utilizes either 5052 or 5056 alloy foil material and is available in two cell sizes. FlexCore® has unique cell configurations that significantly reduce anticlastic behavior and permit small radii of curvature without deformation of the cell walls or loss of mechanical properties. Aluminum Flex-Core® has been developed to allow the designer and fabricator freedom in the utilization of honeycomb for components requiring simple and compound curvatures. Highly contoured sandwich panels such as leading edges and flaps, nacelles, fairings, doors, and access covers, and other parabolic, spherical, and cylindrical shapes are prime Flex-Core® candidates. Duplicate die model and control tooling for aerospace use are also examples of Flex-Core® Applicationss. As with standard aluminum honeycomb, Flex-Core® provides controlled crush characteristics without rebound and thus curved energy absorption units become feasible and economical.

Nomex® AHN-4120-1/4-4.0 is an Aerospace Grade Nomex® Honeycomb which exhibits high strength and toughness in a small cell, low density, non-metallic honeycomb. It is particularly noted for its corrosion resistance. This material is fire resistant and is typically used in transport aircraft construction where low O.S.U., smoke, and toxicity characteristics are a necessity. This material also exhibits good thermal insulation properties and also has good dielectic properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

Ultracor UCF-281-3/16-15.0 is used in structural applications where high mechanical performance is paramount and low density remains a primary concern.

Coremat® XM 10 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process.

Plascore Aramid Fiber PN1-1/4-3.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Nomex® AHN-4120-AFC-9.0 is an Aerospace Grade Nomex® Honeycomb which exhibits high strength and toughness in a small cell, low density, non-metallic honeycomb. It is particularly noted for its corrosion resistance. This material is fire resistant and is typically used in transport aircraft construction where low O.S.U., smoke, and toxicity characteristics are a necessity. This material also exhibits good thermal insulation properties and also has good dielectic properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

Soric® SF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Plascore PC2 Polycarbonate Honeycomb exhibits a unique cell structure. The core has 3 orientations vs. the 2 orientations common with other honeycomb, making its properties more uniform. Each cell has a tubular form and is inherently stable.

Rock West Composites NOM-0335-24-D is a Aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Nidagravel® 139+ gives an impression of space and allows to combine mineral and vegetal. It is ideal for integrating a natural look into an outdoor setting. Installed at the foot of the wall, the small nidagravel plates have a dimension adapted to the realization of gravel bands (also called “cleaning bands”) on the outskirts of the house. These gravel bands prevent splashing on the plaster in the event of rain, for example. The nidagravel can be easily transported in the trunk of a car and quickly allows various permeable and durable outdoor arrangements (gravel courtyards, paths, alleys, parking lots, terraces, etc.) The alveolar structure of nidagravel plates® keeps the gravel perfectly square.

Soric® TF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

ACP Composites Aramid Honeycomb Core -Over-Expanded Cell is a lightweight, high strength, nonmetallic honeycomb core material manufactured from aramid fiber paper with a 3/16" rectangular cell and a density of 3 pounds per cubic foot (PCF). The overexpanded cell shape allows the core to flex in one direction easily, making it suitable for forming simple curves. After the honeycomb is formed, it is coated with a heat resistant phenolic resin to increase its strength and thermal properties. Aramid Honeycomb exhibits high strength-to-weight ratio, exceptional stiffness and is very bondable.

Nomex® AHN 7800-3/16-2.0 is an Commercial Grade Nomex® honeycomb particularly suited for use where resistance to corrosive attack and moisture are important. This material exhibits good strength characteristics and is fire resistant. It is available in a variety of cell sizes and densities to suit most purposes. Typical applications include lightweight non-structural bulkheads for ships, joiner panels, shelters, antennas, and auto body panels. This material is not intended for aircraft or aerospace applications. This material also exhibits good thermal insulation properties and also has good dielectric properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

Atlas F50 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

KingecoPan™ KE-SX009 is a CFRT composite panel with thickness of 2-10mm.

SAH® Hexagonal (Showa Aramid Honeycomb) SAH 1/8-1.8 is produced with Nomex® aramid fiber sheets. These sheets are bonded by a thermosetting adhesive at the nodes. After expanded to the hexagonal cell or over-expanded cell configuration, it is dipped in a heat resistant phenolic resin and cured in an oven.

HexWeb® HFT® is a fiberglass ± 45 degree Fibertruss® bias weave reinforced/phenolic honeycomb. This bias weave construction enhances the shear modulus properties of the honeycomb core. The shear modulus for HexWeb® Fibertruss® HFT® is about twice that of HRP® (honeycomb made of straight weave fiberglass) and three times that of HRH® -10 (honeycomb made from NOMEX® ). This makes HexWeb® Fibertruss® HFT® honeycomb ideal for applications where minimum deflections are required. There is little change in flatwise compression properties due to the bias of the glass. HexWeb® Fibertruss® HFT® has improved damage resistance and handling since the 45 degree angle of the fiber at the cell wall corners allows greater flexibility. This increased flexibility allows the HexWeb® Fibertruss® HFT® to be formed more easily than straight weave honeycombs, resulting in reduced shop losses and simplified fit up of parts during assembly. HexWeb® Fibertruss® HFT® has improved node bond strength and flexibility that makes it possible to offer a 1/8-inch cell fiberglass reinforced honeycomb. This, together with the higher shear properties, makes HexWeb® Fibertruss® HFT® an excellent core for use with high modulus graphite or other composite facing materials. The potential problem of galvanic corrosion with untreated aluminum honeycomb is eliminated, and the small cell size provides uniform support and bonding area for such facings.

PAA-SHH® PAA-SHH® (Phosphoric Acid Anodized-Showa Hexagonal Honeycomb) 1/8-5052-001 is an aerospace grade 5052 aluminum honeycomb materials produced from phosphoric acid anodized aluminum sheets. Phosphoric acid anodize gives an excellent corrosion resistance to aluminum alloy, and the surface treatment system with a corrosion prohibited primer provide the greatest bondability and fatigue strength under critical conditions such as hot & wet condition. PAA-SHH is available in a wide selection of cell sizes and foil thickness.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Nomex® AHN 7800-3/16-4.0 is an Commercial Grade Nomex® honeycomb particularly suited for use where resistance to corrosive attack and moisture are important. This material exhibits good strength characteristics and is fire resistant. It is available in a variety of cell sizes and densities to suit most purposes. Typical applications include lightweight non-structural bulkheads for ships, joiner panels, shelters, antennas, and auto body panels. This material is not intended for aircraft or aerospace applications. This material also exhibits good thermal insulation properties and also has good dielectric properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

CORMASTER NOMEX® AEROSPACE Hexagonal C1 3,2 is the ideal lightweight material for aeronautical applications and non metallic structures made from NOMEX® T412 paper sheets bonded together and coated with a phenolic resin.

Plascore Aramid Fiber PN1-1/8-6.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Plascore Aramid Fiber PN1-1/8-3.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Plascore Aramid Fiber PN1-3/16-2.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Ultracor UQF-314-3/8-3.0 is used in double shell reflectors, radomes and other lightly loaded structures requiring Quart’s dielectric properties.

Corrosion resistant HexWeb® Rigicell™ is manufactured by bonding together corrugated sheets of treated 5052 aluminum. This process allows fabrications of much higher density honeycomb than is possible by the expansion process. The node bond adhesive is a thermosetting type. Slices are cut from the corrugated block to specified thickness, length, and width.