Products in Additives: Spray Lay-up

Polymer Curing Agent A is a colorless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitized with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins.

Polymer Curing Agent B is a clear solution of acetyl acetone peroxide (AAP), or 2,4- Pentanedione peroxide in a phlegmatizer. Polymer Curing Agent B is a very effective polymerization initiator for the room temperature cure of unsaturated polyester resins and gives exceptionally fast cures without significantly affecting gel times in most resin systems. Polymer Curing Agent B has the added advantage of being a low fire or explosion hazard.

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

AFCONA 7202 is mainly recommended for UPE resin systems. It is considered to be a moderately strong defoamer, so it is not suitable for unpigmented or clear systems. Adding AFCONA - 7202 to resin may result in in-can haziness, but this will have a minimal effect on the final gloss and will not affect the other properties of the system.

FILCO® 361 is an epoxy-ester resin meticulously crafted within a non-ionic water emulsion, designated as a film-former within glass fiber sizings. It manifests as a milky liquid. Key product characteristics include its high molecular weight epoxy-ester composition, a narrow particle size distribution, a commendable shelf life attributed to hydrolytic resistance and fine particle size, high mechanical shear stability even in diluted emulsions, and robust stability against hydrolysis and sedimentation across a wide pH range.

FILCO® 8001 presents as a milky liquid and is classified as an unsaturated polyester-epoxy polymer within a non-ionic water emulsion. It is recommended as a film for glass fiber sizing, particularly for applications involving translucent sheet roving, spray roving, and mat roving.

FILCO® 350 is an unsaturated polyester resin in a non-ionic water emulsion, serving as a film former in sizings for glass fibers. The appearance is a milky liquid, and characteristics of the resulting film include being clear, non-tacky, and compatible with unsaturated polyesters. It also exhibits rapid solubility in styrene.

FILCO® 7703 is an unsaturated polyester resin provided in non-ionic water dispersion, serving as a film former in glass fiber sizings. It presents as a milky liquid. Notable characteristics of this product include an integrated non-ionic emulsifier within the polymer, high mechanical shear stability when the emulsion is diluted, and impressive hydrolysis and sedimentation stability across a broad pH range.

FILCO® 5001 is a product with an unsaturated polyester resin meticulously formulated within a non-ionic water emulsion, presenting as a milky liquid. Its material features include excellent compatibility, high hardness, and non-flammability. It is available in a liquid physical form.

FILCO® 354N represents an unsaturated polyester resin finely crafted within a non-ionic water dispersion, serving as a film former within glass fiber sizings. Its presentation showcases a milky liquid appearance. Key product characteristics encompass a non-ionic emulsifier inherent within the polymer, a narrow particle size distribution, a prolonged shelf life attributed to hydrolytic resistance and fine particle size, high mechanical shear stability even in diluted emulsions, and robust stability against hydrolysis and sedimentation across a wide pH range.

FILCO® 7900 is an unsaturated polyester-epoxy polymer dispersed in a milky liquid non-ionic water emulsion. It serves as a film for various types of glass fiber sizes, including roving for translucent sheets, spray roving, and mat roving. Laminates manufactured using glass fibers treated with FILCO® 7900 exhibit remarkably high transparency. Additionally, this product is non-flammable, ensuring safety in handling and usage.

FILCO® 7607 is an unsaturated polyester resin offered in a non-ionic water emulsion, designed as a film-former for glass fiber sizings. Its appearance is akin to that of a milky liquid. Notable characteristics of this product include a built-in non-ionic emulsifier within the polymer, a narrow particle size distribution, an extended shelf life due to hydrolytic resistance and fine particle size, high mechanical shear stability when the emulsion is diluted, and exceptional hydrolysis and sedimentation stability across a wide pH range.

FILCO® TAC-453 is a milky liquid unsaturated polyester resin dispersed in a non-ionic medium, designed for use as a film in glass fiber sizing applications. Its key characteristics include having a non-ionic emulsifier built into the polymer, ensuring a narrow particle size distribution, and granting a prolonged shelf life due to resistance against hydrolysis and fine particle size. It also boasts high mechanical shear stability in diluted emulsions and exhibits stability against hydrolysis and sedimentation across a broad pH spectrum.

Polyfill® 203 Alumina Trihydrate is expertly tailored for thermoset plastic and CASE applications demanding high loading levels. This intermediate product empowers compounders to attain maximal loading while maintaining acceptable physical properties. The heightened loading levels facilitated by Polyfill® 203 amplify flame retardancy and smoke suppression, leveraging increased H2O molecule availability.

Polyfill® 405SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 403 is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 301 Alumina Trihydrate is meticulously crafted for thermoset plastic and CASE applications necessitating heightened loading levels. This medium grind series enhances surface area, promoting improved flow and surface finish properties. By incorporating Polyfill® 301, you amplify flame retardancy and smoke suppression, bolstered by increased H2O molecule availability.

Polyfill® 403SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 30 is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 130 Alumina Trihydrate is meticulously engineered for industrial applications requiring peak loading levels. With a low surface area, the coarse grind of Polyfill® 130 empowers maximum loading levels, enhancing flame retardancy and smoke suppression through increased H2O molecule availability.

Polyfill® 407 Alumina Trihydrate is a specialized product meticulously designed for wire/cable-elastomers, coatings, and thermoset/plastic applications. Engineered with precision, it boasts a controlled particle size distribution and essential physical properties, empowering compounders to achieve elevated loading levels and superior overall performance. The enhanced surface area enables exceptional surface finish and impact characteristics, while meticulous particle distribution control allows for maximum loading levels.

Polyfill® 405 Alumina Trihydrate is a specialized product meticulously designed for wire/cable-elastomers, coatings, and thermoset/plastic applications. Engineered with precision, it boasts a controlled particle size distribution and essential physical properties, empowering compounders to achieve elevated loading levels and superior overall performance. The enhanced surface area enables exceptional surface finish and impact characteristics, while meticulous particle distribution control allows for maximum loading levels.

Polyfill® 302 Alumina Trihydrate is meticulously crafted for thermoset plastic and CASE applications necessitating heightened loading levels. This medium grind series enhances surface area, promoting improved flow and surface finish properties. By incorporating Polyfill® 302, you amplify flame retardancy and smoke suppression, bolstered by increased H2O molecule availability.

Polyfill® 407SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 110 Alumina Trihydrate is meticulously engineered for industrial applications requiring peak loading levels. With a low surface area, the coarse grind of Polyfill® 110 empowers maximum loading levels, enhancing flame retardancy and smoke suppression through increased H2O molecule availability.

Polyfill® 402SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 204 Alumina Trihydrate, expertly tailored for thermoset plastic and CASE applications demanding high loading levels. This intermediate product empowers compounders to attain maximal loading while maintaining acceptable physical properties. The heightened loading levels facilitated by Polyfill® 204 amplify flame retardancy and smoke suppression, leveraging increased H2O molecule availability. Rest assured, Polyfill® 204 alumina trihydrate adheres to the exacting standards of Cimbar Performance Minerals' ISO 9001:2015 quality program.

Polyfill® 301SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 402 is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

PolyJet® 502SM is a versatile additive specifically designed for enhancing fire safety in various applications. As a flame retardant and smoke suppressant, it serves both plastics and elastomers, including cables, carpet backing, and flooring. With compatibility in processing methods like extrusion, pultrusion, and resin transfer molding, it guarantees fire resistance in composite materials.

Pulpro PP-8 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).

Pulpro PP-20 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Pulpro PP-10 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

MoldX® A110 is a second generation optimized Alumina Trihydrate (ATH) product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.MoldX® A110 can provide low cost flame retardancy and smoke suppression in a variety of other color sensitive thermoset processes such as: BMC, spray-up and hand lay-up, wet mat molding and epoxy potting