Products in Acrylics, Acrylates & Methacrylates: Coatings

Viscoat #196, TMCHA is a good UV diluent with high Tg and low viscosity. It is also highly distillated, so that it has higher purity than the competitors’ product. It has lower smell among cycloaliphatic acrylate.

V-8F is registered in many countries.It has fluorine properties like water / oil repellency, low surface tension, low RI, and low gas transparency. This Product is not applicable PFOA / PFOS problem due to shorter alkyl chain so far. Please be aware these monomers are easy to volatile because F atoms induce weak intermolecular interaction. Recently these materials are studied specialty application like living radical polymerization, oligomer for nano-imprint photolithography, and synthetic opal.

V#802 has unique structure. Some pentaerthritols are connected each other and then acrylated, so it has high functionality, 7-10. The properties of V#802 are extended DPHA. Although Double bond equivalent is PETA < DPHA < #802, it has very hard property and high sensitivity. It has high molecular weight and viscosity, but the compatibility is not so bad. V#802 is solved into IPA, Toluene, Ethyl acetate, MEK and so on. .

V-8FM is registered in many countries.It has fluorine properties like water / oil repellency, low surface tension, low RI, and low gas transparency. This Product is not applicable PFOA / PFOS problem due to shorter alkyl chain so far. Please be aware these monomers are easy to volatile because F atoms induce weak intermolecular interaction. Recently these materials are studied specialty application like living radical polymerization, oligomer for nano-imprint photolithography, and synthetic opal.

V-4F is registered in many countries.It has fluorine properties like water / oil repellency, low surface tension, low RI, and low gas transparency. This Product is not applicable PFOA / PFOS problem due to shorter alkyl chain so far. Please be aware these monomers are easy to volatile because F atoms induce weak intermolecular interaction. Recently these materials are studied specialty application like living radical polymerization, oligomer for nano-imprint photolithography, and synthetic opal.

V-13F is registered in many countries.It has fluorine properties like water / oil repellency, low surface tension, low RI, and low gas transparency. This Product is not applicable PFOA / PFOS problem due to shorter alkyl chain so far. Please be aware these monomers are easy to volatile because F atoms induce weak intermolecular interaction. Recently these materials are studied specialty application like living radical polymerization, oligomer for nano-imprint photolithography, and synthetic opal.

V-3F is registered in many countries.It has fluorine properties like water / oil repellency, low surface tension, low RI, and low gas transparency. This Product is not applicable PFOA / PFOS problem due to shorter alkyl chain so far. Please be aware these monomers are easy to volatile because F atoms induce weak intermolecular interaction. Recently these materials are studied specialty application like living radical polymerization, oligomer for nano-imprint photolithography, and synthetic opal.

ISTA from Osaka Organic Chemical is highly purified by distillation. It has highly branched bulky pendant group. Because of this structure, it has low polarity, low permittivity, high Tg, low surface tension, high dispersive power and high anti-hydrolysis properties. Main application is adhesives to control Tg, surface tension, permittivity and slippage properties. ISTA is also highly distilled even though it has high molecular weight. It has the lowest acrylic equivalent monomer in the distilled monomer We can handle ISTA easily because it is liquid product compared with linier stearyl acrylate, a solid acrylate.

BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. Ifs ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications.

Methacrylic anhydride is a reactive monomer used for the preparation of different type of monomers under mild reaction conditions. It finds applications in light-curing coatings, cross-linked materials like synthetic resin. It acts as an intermediate for the preparation of fibers, resins and pharmaceuticals.

BR-542MB is a difunctional, aliphatic polyether urethane methacrylate. BR-542MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. As a primary oligomer, BR-542MB offers excellent properties of adhesion and optical clarity. As a co-oligomer, BR-542MB can be used to improve an existing formulation's glass adhesion.

BRC-842MB is a difunctional, hydrophobic urethane methacrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. Its ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications.

BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact resistant coatings, and provides low color and excellent non-yellowing performance.

Ethomer series of HASE Monomers are specialty methacrylic based monomers providing enhanced performance in the manufacture of Hydrophobically modified Alkali Swellable Emulsions (HASE) rheology modifiers. These thickeners manufactured by using Ethomers are a cost effective replacement to HEC. Ethomer Monomers can give a formulator the option of choosing from a wide range of shear profile.

Ethomer series of HAZE Monomers are specialty methacrylic based monomers providing enhanced performance in the manufacture of Hydrophobically modified Alkali Swellable Emulsions (HASE) rheology modifiers. These thickeners manufactured by using Ethomers are a cost effective replacement to HEC. Ethomer Monomers can give a formulator the option of choosing from a wide range of shear profile.

BR-3741AB is a 1.3 functional aliphatic polyether urethane acrylate. The extremely flexible nature of BR-3741AB makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings.

MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate [UDMA], BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resistivity. When compared to FDM-printed ESD parts, ESD resins produced with MechT E35A can achieve fully isotropic conductivity with high resolution and isotropic mechanical properties.

BR-582 is a 2.4 average functional aliphatic polyether urethane acrylate. As with other BR-500 series materials, BR-582 is designed to offer a balance of benefits between toughness and flexibility. While only slightly lower in tensile strength and hardness than BR-571, BR-582 has almost double the total elongation at break. BR-582 responds quickly to UV cure, owing to its elevated functionality.

Ethomer series of HAZE Monomers are specialty methacrylic based monomers providing enhanced performance in the manufacture of Hydrophobically modified Alkali Swellable Emulsions (HASE) rheology modifiers. These thickeners manufactured by using Ethomers are a cost effective replacement to HEC. Ethomer Monomers can give a formulator the option of choosing from a wide range of shear profile.

BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device.

BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of biobased content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balnce of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality and tin-free nature make this an excellent choice for consumer applications with low irritancy.

BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing.

PL-3208 Ethoxylated Bisphenol A Dimathacrylate is a difunctional monomer providing low volatility and flexibility.

PL-3216 is a difunctional monomer providing water resistance and fast cure.

PL-3216B is a difunctional monomer providing water resistance and fast cure.

BAMM 2-ETHYLHEXYL ACRYLATE is used in the production of coatings and inks, adhesives, sealants, plastics and elastomers.

BAMM ISO-BUTYL ACRYLATE is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

PL-3103 is a monofunctional monomer that provides good adhesion and low shrinkage.

PL-3214A is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

PL-3216A is a difunctional monomer providing water resistance and fast cure.

BAMM TERT-BUTYL ACRYLATE is used in the production of coatings, adhesives, fibers, plastics, textiles and inks.

PL-3214B is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

PL-3214 is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

PL-3218 is a difunctional monomer providing low viscosity and high boiling point.

PL-3116 is a monofunctional monomer providing good adhesion, high Tg, and low viscosity.

PL-3216C is a difunctional monomer providing water resistance and fast cure.