Products in Surface Modifiers

Pergopak® M6 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M6 provides excellent weather resistance and gloss retention.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Nicron® 665 is an off-white, high-purity, platy, ultrafine talc. It is a highly effective gloss control additive in paints and coatings. Nicron® 665 could be used in performance plastics and plastic films for excellent nucleation and very good stiffness, HDT, dimensional stability, and esthetics.

LO-VEL® 8300 flatting agent is a synthetic amorphous precipitated silica treated with a functionalized wax. It is designed for use in waterborne and solvent-borne coatings, and is suitable for coatings with a dry film thickness of less than 1 mil (< 20 microns).

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Access Rudolf Organosilane A302-1 is a versatile, clear to light yellow liquid silane coupling agent offered by Access Rudolf. It is primarily used as an adhesion promoter and surface modifier in a variety of industrial applications, including coatings, adhesives, and composites. This product is designed to enhance the performance of organic and inorganic materials by providing a strong chemical bond between them. Access Rudolf Organosilane A302-1 is also AICS, EINECS, ENCS, IECSC, KECL, DSL, PICCS, and TSCA registered, ensuring its compliance with various international regulations.

Pergopak® M3 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M3 provides excellent weather resistance and gloss retention.

Hi-Sil® T-700 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-700 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-700 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

AFCONA 3035 is an additive designed to improve leveling and prevent surface defects in UPE and epoxy systems. It has minimal slip effect and is compatible with high polarity systems. It can be used in both water- and solvent-based coatings, as well as to prevent curtain-rupture in curtain coating applications.

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 3835 is an additive designed to crosslink in and act as a slip and leveling agent for UV coatings. AFCONA 3835 is a reactive polyether modified polysiloxane with methacrylate functionality that can crosslink with UV / EB systems. It averages 7 functional groups per molecule. With this property, it offers permanent slip in coatings, giving anti-blocking and anti-scratch properties.

Dar-Tech Hauthane HD-2125 is a hard, chemically resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementitious, metal, and wood substrates. This product exhibits superior chemical resistance properties while maintaining excellent flexibility and gloss retention characteristics.

AFCONA 3230 is an additive designed to offer excellent slip without stabilizing foam in polyurethane coatings. Most polysiloxane additives that provide good transparency also stabilize foam, and those that don't stabilize foam often adversely affect the transparency of the coating. AFCONA 3230 is specifically formulated for polyurethane systems where excellent slip is required but foam stabilization is not desired.

AFCONA 3030 is a slip and leveling additive for both solvent and water-based systems. It is a polyether-modified polysiloxane and is recommended as a slip and leveling agent to prevent Bénard Cells and provide leveling and prevent craters. It can be used in both water- and solvent-based applications, though it may stabilize foam in water-based coatings.

Hi-Sil® T-800 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-800 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-800 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

AFCONA 3285 is a slip and leveling additive that is terminated by di-hydroxyl functional groups. This polysiloxane-based polymer enables it to crosslink in polyurethane systems as well as heat-cured paints, providing permanent slip to the finished coatings. AFCONA 3285 is recommended for all types of solvent-based coatings, especially wood coatings.

ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins.

ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products;

ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins.

ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins.

ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins.

ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins.

ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins.

ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins.

ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats.

ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins.

ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins.

Syntran® 5934 is a water-based emulsion that modifies the visual appearance of products from clear to opaque without affecting the other desired properties of the formula. This white emulsion functions as an opacifier for coating applications and is used in toiletries and lotions, liquid detergents, and paints and coatings.

AFCONA 6960 is a micronized PTFE wax for all types of paint, ink and plastic surface modifiers. It gives better transparency to wet paint and final coating comparing to other PTFE waxes that are available in the market. It also provides anti-blocking and anti-scratch properties.

Calford® WP is an ethylene bis stearamide (EBS) wax (C38H76O2N2) in powder (WP) form, produced using vegetable-based stearic acid. It is primarily used as an internal and external lubricant for polymers such as polyethylene, polypropylene, ABS, polystirene, PVC, and phenols. It can also be used in coating and ink applications as dispersants and matting agents.

AFCONA 3571 is a general purpose additive used to enhance surface properties in a water-based coating system. AFCONA 3571 is a special modified polydimehylsiloxane, to provide the surface properties i.e. better wetting, slip and soft feel. It offers good compatibility to most water-based systems.

ACCESS® SF MH20 Fluid is a silicone-based defoamer offered by Access Rudolf that helps to eliminate foam in various industrial processes. This fluid provides excellent stability, making it perfect for use in coatings, adhesives, and other industrial applications. By reducing foam formation, this product can improve the overall efficiency and quality of your industrial processes. Additionally, ACCESS® SF MH20 Fluid is designed to be easy to handle and apply, allowing you to incorporate it easily into your existing processes.