Products in Surface Modifiers

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

Syntran® PA-1475 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Hi-Sil® T-152 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-152 is a premium-grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-152 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

AFCONA 3236 is an additive designed to provide slip and leveling, as well as good defoaming performance. It is an alkyl-modified polysiloxane that offers excellent slip and leveling properties. Unlike other organically modified polysiloxanes, AFCONA 3236 acts as a defoamer and does not stabilize foam in most systems, making it suitable for foam-sensitive applications such as floor coatings and high-build systems.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

AFCONA 3239 is an additive designed as a slip and leveling agent that also offers defoaming. It is a very suitable leveling agent for epoxies, and will not stabilize foam, but instead act as an effective defoamer in such systems.

AFCONA 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam. It is specially developed for all solvent-based systems where slip is the most important factor and foam stabilization is undesirable. AFCONA 3250 belongs to the same family as AFCONA 3230. But while AFCONA 3230 is effective only in polyurethane coatings, AFCONA 3250 works in all solvent-based coatings.

AFCONA 3670 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. AFCONA 3670 is an improved version of AFCONA 3777 on managing surface control of coatings. It has lower surface tension than AFCONA 3777. The combination with a suitable polysiloxane for better overall performance is highly recommended.

Lo-Vel® 2003 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 2000 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 275 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

Lo-Vel® 6000 is a synthetic, amorphous silicon dioxide flatting agent that is designed for use where a Hegman value of 5 to 6 is required. The combination of high flatting at low use levels and ease of incorporation delivers expanded formulation flexibility.

AFCONA 3238 is an additive designed as a slip and leveling agent that also offers defoaming. For matte finish coatings, the addition of AFCONA 3238 will help in the orientation of matting agents. In UV curing systems, this product further reduces gloss when added together with a matting agent.

AFCONA 3031 is a polyether modified polysiloxane slip and leveling additive used primarily in metal and UV coatings. It provides a very good slip performance, which is characterized by an "oily" or "wet look" appearance that can visually enhance film thickness. AFCONA 3031 is used in metal coatings, such as industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

Lo-Vel® 39A belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 3232 is an additive designed as slip and leveling for solvent-based coatings. It is the solvent-free version of AFCONA 3033. AFCONA 3232 is an end modified special polysiloxane. With this modification, it enhances coatings slip performance and surface smoothness. The slip characteristic is dry type, which makes it very suitable for wood coatings and thermoplastic character resins.

AFCONA 3233 is a slip and leveling additive for solvent- and water-based systems. It is recommended as a slip and leveling agent for all solvent-based coatings to prevent Bénard Cells, provide leveling, and prevent craters. AFCONA 3233 can be used as leveling and anti-crater agent in both water- and solvent- based applications. However, this product may stabilize foam in water-based coatings.

AFCONA 3231 is a slip and leveling additive for metal and UV coatings that offers very good slip performance with an "oily" or "wet look" appearance to visually enhance film thickness. It is commonly used in industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

Calford® WB is an ethylene bis stearamide (EBS) wax (C38H76O2N2) in beaded (WB) form, produced using vegetable based stearic acid. It is primarily used as an internal and external lubricant for polymers such as polyethylene, polypropylene, ABS, polystirene, PVC, and phenols. It can also be used in coating and ink applications as dispersants and matting agents.

Lo-Vel® 29 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 3570 is a leveling and anti-crater agent for aqueous coatings with a low foam stabilizing effect. It is a fluorocarbon modified polyacrylic, neutralized with a suitable amine, and dissolved in water. It is suitable for all water-based paints and is recommended for use in all kinds of water-based coatings with a pH value of 8.0 or higher.

AFCONA 3034 is an additive designed to reduce surface tension, improve substrate wetting, and provide anti-crater performance and leveling, including vertical leveling. Its fluorocarbon modification gives it a very low surface tension, further enhancing its performance in anti-crater properties, substrate wetting, and leveling.

AFCONA 3580 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. AFCONA 3580 is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

AFCONA 3033 is an additive designed to improve the slip and leveling performance of solvent-based coatings. It is an end-modified special polysiloxane, which enhances the dry slip characteristics of coatings, making it particularly suitable for wood coatings and thermoplastic resins.

AFCONA 3085 is a slip and leveling agent terminated with hydroxyl functional groups. It is a polysiloxane-based polymer with di-hydroxyl functional groups at both ends, allowing it to cross-link in polyurethane systems and heat-cured paints. With its cross-linking properties, AFCONA 3085 is specially designed to give permanent slip to polyurethane coatings and heat-cured paints.

Hi-Sil® T-600 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-600 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-600 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Pergopak® M5 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M5 provides excellent weather resistance and gloss retention.

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

LO-VEL® 8300 flatting agent is a synthetic amorphous precipitated silica treated with a functionalized wax. It is designed for use in waterborne and solvent-borne coatings, and is suitable for coatings with a dry film thickness of less than 1 mil (< 20 microns).

Nicron® 665 is an off-white, high-purity, platy, ultrafine talc. It is a highly effective gloss control additive in paints and coatings. Nicron® 665 could be used in performance plastics and plastic films for excellent nucleation and very good stiffness, HDT, dimensional stability, and esthetics.

Pergopak® M4 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M4 provides excellent weather resistance and gloss retention.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.