Products in Additives: Wood Coating

AFCONA 3232 is an additive designed as slip and leveling for solvent-based coatings. It is the solvent-free version of AFCONA 3033. AFCONA 3232 is an end modified special polysiloxane. With this modification, it enhances coatings slip performance and surface smoothness. The slip characteristic is dry type, which makes it very suitable for wood coatings and thermoplastic character resins.

AFCONA 2723 is a defoamer and air-releaser for unsaturated polyester, polyurethane, UV, and epoxy resin systems. It is recommended for thin-layer (gel coat), casting resins, and epoxy resin systems (e.g. floorings), as well as for room temperature curing of unsaturated polyesters used in glass fiber-reinforced systems.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

AFCONA 2035 is a moderate defoamer that minimizes side effects, prevents the formation of foam and blisters during manufacturing and application, and offers good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by brush and conventional spray methods, and is suitable for systems ranging from low to high polarity.

AFCONA 3236 is an additive designed to provide slip and leveling, as well as good defoaming performance. It is an alkyl-modified polysiloxane that offers excellent slip and leveling properties. Unlike other organically modified polysiloxanes, AFCONA 3236 acts as a defoamer and does not stabilize foam in most systems, making it suitable for foam-sensitive applications such as floor coatings and high-build systems.

AFCONA 3231 is a slip and leveling additive for metal and UV coatings that offers very good slip performance with an "oily" or "wet look" appearance to visually enhance film thickness. It is commonly used in industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

AFCONA 6225 is a dispersant and emulsifier for universal colorants, color acceptance additive. AFCONA 6225 is an updated version of AFCONA 6220. It offers better dispersing performance as well as better color acceptance in decorative paints. emulsify water into solvent-based coatings. This is especially helpful in long oil alkyds, where it can improve the color acceptance of universal commercial colorants.

AFCONA 4010 is a polymeric dispersant used mainly for inorganic pigments and certain organic pigments. It is principally developed for stabilizing inorganic pigments such as TiO2, iron oxides, and matting agents. It can be used in almost all solvent-based coating systems, because AFCONA 4010 has very good compatibility with almost all resins used in coatings.

AFCONA 5280 is the best conventional wetting and dispersing additive, as it is economical yet still offers excellent performance in pigment stabilization. Its performance is almost similar to that of high molecular weight dispersing agents. It is suitable for both oil- and solvent-based printing inks and has good alcohol solubility.

AFCONA 4595 is a wetting and dispersing additive for water-based coatings and pigment concentrates. It improves storage stability and prevents negative flocculation effects, such as flooding and floating. It is a high molecular weight polymeric dispersant designed for deflocculation of pigments in water-based decorative and industrial paints.

AFCONA 5210 helps to wet and disperse inorganic pigments, mainly TiO2 and extenders. It is specially designed as an effective dispersant for TiO2 and recommended for use in pure white systems. However, if the white base needs to be tinted with other colors later, AFCONA 4010 is a better choice.

AFCONA 5066 is a silicone-free version of AFCONA 5065, and it can be used in the same applications. It can also be post-added to solve flooding and floating problems. In combination with a suitable high molecular weight dispersant, AFCONA 5066 can be used as a co-grinding agent.

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 3570 is a leveling and anti-crater agent for aqueous coatings with a low foam stabilizing effect. It is a fluorocarbon modified polyacrylic, neutralized with a suitable amine, and dissolved in water. It is suitable for all water-based paints and is recommended for use in all kinds of water-based coatings with a pH value of 8.0 or higher.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

AFCONA 5008 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces and organically treated bentonites. It reduces the interfacial tension between pigments or extenders and the vehicle, and also stabilizes the pigments through charge repulsion forces.

AFCONA 5251 is a dispersant developed for dispersing and stabilizing transparent iron oxide pigments. AFCONA 5251 is a dispersant developed for dispersing and stabilizing transparent iron oxide pigments. It may also be used as a dispersant for other inorganic pigments and extenders, for which it reduces the viscosity in the dispersion. Therefore, it is very useful in highly filled systems.

AFCONA 3085 is a slip and leveling agent terminated with hydroxyl functional groups. It is a polysiloxane-based polymer with di-hydroxyl functional groups at both ends, allowing it to cross-link in polyurethane systems and heat-cured paints. With its cross-linking properties, AFCONA 3085 is specially designed to give permanent slip to polyurethane coatings and heat-cured paints.

AFCONA 4050 is a high molecular weight polymeric dispersant for the deflocculation of all type of pigments. AFCONA 4050 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance gives it very good stability performance with all type of pigments.

Lo-Vel® 27 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 4011 is a polymeric dispersant mainly for inorganic pigments and some organic pigments. It is an improved version of AFCONA 4010, offering a better balance between price and performance. Principally developed for stabilizing inorganic pigments such as TiO2, iron oxides and matting agents, AFCONA 4011 is compatible with almost all resin used in coatings and can be used in most solvent-based coating systems.

AFCONA 5054 is a wetting and dispersing additive to prevent sedimentation and flooding of pigments. It helps to reduce interfacial tension between hydrophilic pigments/extenders and the binder, forming a lattice structure with the pigments at the same time. It stabilizes pigment through electrical charge repulsion forces.

Lo-Vel® 2003 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 2040 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by spray and brush, and is particularly suitable for systems ranging from low polarity to high polarity. AFCONA 2035 is recommended for brush and conventional spray applications.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

AFCONA 2720 is an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, epoxies and PVC-compounds. It supports the quick deaeration of thermosetting resin systems, allowing for the production of foam-free and blister-free self-leveling compounds and laminates. Additionally, AFCONA 2720 is suitable for use in can and coil coatings, where it is less likely to cause side effects such as inconsistent craters in the line.

AFCONA 3285 is a slip and leveling additive that is terminated by di-hydroxyl functional groups. This polysiloxane-based polymer enables it to crosslink in polyurethane systems as well as heat-cured paints, providing permanent slip to the finished coatings. AFCONA 3285 is recommended for all types of solvent-based coatings, especially wood coatings.

AFCONA 4060 is a high molecular weight polymeric dispersant for deflocculation of all types of pigments. It is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance gives it fair stability performance with all type of pigments.

AFCONA 4560 is a polymeric dispersant that provides excellent stability for inorganic and organic pigments in water-based systems. It is a high molecular weight, pH-independent polymeric dispersant that is specifically designed to deflocculate pigments in decorative and industrial paints. It is a modified polyacrylate polymer that offers steric hindrance and electron repulsion for superior performance.

AFCONA 2502 is a defoamer for water-based applications that undergo high shear forces during preparation, including pigment pastes and other high-solid systems. AFCONA 2502 is a defoamer for water-based applications. It is suitable for applications like coatings and inks as well as for pigment concentrate preparations.

AFCONA 2018 is a silicone-free defoamer that is recommended for systems where in-can transparency is important. It prevents the entrapment of air during processing steps such as stirring or pumping, and functions well during the application of paints and lacquers. AFCONA 2018 is well-suited for solvent-based wood finishes where foaming is a problem when applied by spraying.

AFCONA 5207 is a very economical dispersant with good pigment stabilizing performance. It functions as a wetting and dispersing additive for solvent-based architectural and decorative paints, also a very suitable dispersant for printing ink. It will stabilize most of the pigments that are commonly used in these systems.

AFCONA 5051 is a non-ionic dispersant that is used for deflocculating transparent iron oxides, as well as dispersing and stabilizing them. It can also be used as a dispersant for other inorganic pigments and extenders, reducing the viscosity in the dispersion, making it particularly useful in high-filled systems.

AFCONA 2524 is an effective water-based defoamer for PU and acrylic-based emulsions. It is a silicone-based defoamer suitable for all types of water-based systems, including those with PVC concentrations of up to 25%. It is also suitable for emulsions based on a combination of acrylic and polyurethane.

AFCONA 6220 is a fatty acid modified emulsifier for universal colorants and improved color acceptance. It is able to stabilize inorganic and organic pigments in water and solvent systems. In addition, it improves the compatibility of the polar ingredients of universal colorants when used in non-polar solvent-based paints.