Products in Other Industrial Applications: Chemical Resistant

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

This material is used for applications that involve manufacturing and transportation at high pressure. The balance quantity of micro glass beads in Original Material "S" plus+® GB provide the combined benefits of extremely high molecular weight polyethylene and glass. The glass beads that protrude from the surface provide a rounded and hard sliding surface. A member of the S plus family Production based on PE-UHMW SG 1.1.

UV 622,Horsorb 622 widely is widely used in polyethylene, polypropylene, polystyrene, olefin copolymer and polyester, soft PVC, polyurethane, metaformaldehyde and polyamide.

Aronkasei AR-710 is styrene type elastomer AR.

Sunvin 21 is a benzotriazole type UV absorber. Characterized by its strong, broad range UV absorption property, UV-P brings an excellent photostability to polymers against UV light exposure in many ways i.e. retarding color yellowing , preventing embrittlement, maintaining of mechanical properties etc. UV-P is particularly effective in styrenic polymers, PVC, unsaturated polyesters, polyurethanes, acrylic polymers and polycarbonates.

G-PAEK™ 1100ESG is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for stock shapes extrusion, easy flow, Beige in color.

Ketoprix™ EK33 and EKT33 resins are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.

Whenever FDA standard compliance is required, NEXA has the right solution with its top performance products NEXA® PFX 8030(white), PFX 8025 (black) and PFX 8048 (white), specially developed for SIP (Steam in Place) cleaning and WFI (Water for Injection) systems. They grant superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications. They have a very stable behavior at high australian pokies online free temperatures (PFX 8048 up to 310° C.), allowing the use in critical applications such as Stage II Sterilization processes, where other type of elastomers lose their sealing capabilities.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

G-PAEK™ 1400P G is Ultra High performance thermoplastic polymer, unfilled Polyether Ketone, semi crystalline, coarse powder for extrusion compounding, high flow, FDA food contact compliant, color natural white.

TPX™ is a crystalline thermoplastic with a very low-density value of 0.82 g/cc and unique permeability characteristics. Its typical color is a translucent milky white, however in thinner gage sheet and film the material is transparent.

G-PAEK™ 1200G is Ultra high Performance thermoplastic polymer, virgin, semicrytalline granules suitable for injection molding, easy flow, Beige in color.

TİSESTER F UNR F01 K04 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Impact Modified, Natural.

Ketoprix™ EK63 and EKT63 resins are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.

Lindoxy 290 is a non-crystallizing, low viscosity epoxidized phenol novolac resin with an average functionality of 3. Lindoxy 290 is designed for composites that require a high glass transition temperature along with great chemical resistance.

Aronkasei AR-720 is styrene type elastomer AR.

PPS-SGL401A87 PPS is a 40% special glass fiber reinforced low chlorine polyphenylene sulfide compound, its CL content is in 900PPM below, mainly used in the field of halogen content requirements.

PPS-SG201E2L is a 20% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,chemical resistance and excellent processability

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

The compound NEXA® PFX 8012 is a new chemical resistant Perfluoroelastomer (FFKM). It has been designed for very demanding sealing applications in aggressive chemical environments. PFX 8012 can withstand very aggressive conditions, such as almost all chemical species, hot organic and inorganic acids, alkalis, ketones, esters, alcohols, fuels and has an excellent water and steam resistance. It has excellent plasma resistance.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

UV 292,Horsorb 292 is a hindered amine light stabilizer. It is particularly recommended for using in coatings.

Sunvin 28 is a benzotriazole type UV absorber. Characterized by its high solubility and superior properties makes UV-328 particularly suitable for light stabilizing in coatings, propylene, polyurethane and polyvinyl chloride. UV-328 is also effective to the light stabilization of unsaturated polyester, polyacrylate and polycarbonate.

Ketoprix™ EKT23G3C3L resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also added to assist in injection molding.

In comparison with other thermoplastics, Murpec® has an exceptionally low thermal expansion coefficient. This property provides optimum dimensional stability and means that dimensions do not change even if used in wet environments. Because of the high glass transition temperature, the material’s rigidity and strength are retained almost in their entirety even at high temperatures. Murpec® materials are extremely resistant to deformation and exceptionally abrasion-proof. Production based on PEEK.

Aronkasei AR-731 is styrene type elastomer AR.

Protec® CoPP provides high levels of impact and corrosion resistance. It’s a great material for tank fabrication, orthotic and prosthetic devices, and many more applications.

Todos Chemical TODOTEX EBF is used in polyester and its blended fabrics brightening, and applicable in both exhaust and padding dyeing, this product is of high light fastness (grade 7-8), excellent stability against acid, alkali, hard water, peroxide and chlorite bleaching.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

UV 944,Horsorb 944 is a polymeric light stabilizer, mainly applied in polyolefin plastic, such as PP and PE, in olefin copolymer, such as EVA and the combination of propylene and rubber. It is also used in polyphenylene oxide compound(PPE), polyacetals and polyamides, polyurethanes, PVC and PVC compound.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Agiplast Agimid 241B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 241B120-SD is PA 12 according to DIN 73378 HIPHL.

G-PAEK™ 1120SFE is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline granules suitable for injection molding, easy flow, light Beige in color.

Original Material "S" plus+® AB contains special substances that prevent the growth of bacteria and other microbes at the same time as protecting the environment and people. The material is thus ideally suited for use when manufacturing and processing foods. It can reduce the growth of microbes on surfaces by between 99.96 to 99.99% in comparison with materials with no special additives. This means that it can virtually eradicate unpleasant smells and the formation of biofilm. Original Material "S" plus+® AB combines antibacterial properties with exceptional characteristics of the "S" plus+® family. A member of the S plus family Production based on PE-UHMW SG 1.2.

Corrtec® Vintec® Clear is a transparent PVC material. It is highly recommended where visibility of a process or an operation is essential. Vintec Clear is impact and corrosion resistant.

Urochem Molding Compound 171 by BI-QEM is a urea formaldehyde resin reinforced with highly refined cellulose. It is modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits good melt flow. It provides high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is suitable for processing by compression molding. Urochem Molding Compound 171 is recommended for electrical accessories, sanitary products, caps and closures. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 12 months below 20°C