company tower banner
Murtfeldt Company Logo

Original Material "S" ® plus+ AB [FS]

Original Material "S" ® plus+ AB [FS] contains special substances that prevent the growth of bacteria and other microbes at the same time as protecting the environment and people. The material is thus ideally suited for use when manufacturing and processing foods. It can reduce the growth of microbes on surfaces by between 99.96 to 99.99% in comparison with materials with no special additives. This means that it can virtually eradicate unpleasant smells and the formation of biofilm. Original Material "S" plus+® AB combines antibacterial properties with exceptional characteristics of the "S" plus+® family. A member of the S plus family Production based on PE-UHMW SG 1.2.

Brand: Original Material "S" (13 products)

Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Materials Features
Characterstics
  • High wear resistance
  • Extremely resistant to chemicals
  • Antimicrobial
  • Reduces bacteria and microbe growth by around 99.96 to 99.99%
  • Approved for use in the food industry (EU and FDA) $$ High wear resistance
  • Long lifetime
  • Good resistance to chemicals
  • Good acoustic insulation
  • No moisture absorption
Capabilities

Curve and chain guides and slide bars or components in the food and drinks industry (especially in the meat sector and in dairies and breweries) Slide and drive elements in medical and food technology In areas where high standards of hygiene are required, such as the storage and handling of food, cosmetics, and drugs.

Applications & Uses

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Average Coefficient of Friction against Steel⁶ (0.25 m/s, 0.25 N/mm²)approx. 0.2μ-
Breaking Elongationmin. 300%DIN EN ISO 5272
Charpy Impact Strength (Two-sided Notch)min. 170kJ/m²DIN EN ISO 179
Coefficient of Elasticity (Tensile Test)min. 700MPaDIN EN ISO 5272
Hardness61 - 65Shore DDIN EN ISO 868
Indentation Hardnessmin. 30MPaDIN EN ISO 2039
Sand-Slurry Test100%DIN EN ISO 15527
Yield Stressapprox. 20MPaDIN EN ISO 5272
Typical Properties
ValueUnitsTest Method / Conditions
CodePE - UHMW-ISO 10431
Average Molecular Weight5 x 10⁶g/mol-
Densitymax. 0.94kg/dm³DIN EN ISO 11831
Material ColourAzure--
Sheet Group1.2-DIN EN ISO 15527
Water Absorption (Saturation at 23°C)max. 0.01%-
Thermal Properties
ValueUnitsTest Method / Conditions
Burning behavior UL 94 (Sample thickness 3/6mm)HB/HB--
Heat Conductivity (23°C)0.4W/(K x m)DIN 52612
Linear Thermal Coefficient of Expansion α (Average Value between 23 and 60°C)20 x 10⁻⁵m/(K x m)DIN EN ISO 113592
Lower Service Temperature⁴-200°C-
Melting Temperature130 - 135°CDIN EN ISO 3146
Upper Service Temperature Constant in Air (5000h)³80°C-
Upper Service Temperature Short-term (Air)²90°C-
Electrical Properties
ValueUnitsTest Method / Conditions
Specific Surface Resistancemin. 10¹²ΩIEC 60093
Electric Strengthmax. 45kV/mmIEC 60243
Specific Contact Resistancemin. 10⁻¹²Ω x cmIEC 60093

Regulatory & Compliance

Certifications & Compliance