Products in Home Care: Cost Effective

DiTech AntiStat Fabric Softener C is a diamidoethyl (hydroxyethyl) ammonium methosulfate quaternary in a propylene glycol solvent. It has low volatile organic carbons and is produced from natural/vegetable-based soybean oil sources, thus making it ideal for use in consumer and I&I green-renewable formulations. It is used in finishing and drying process of textiles because it reduces the effects of exposure of ozone from the atmosphere. DiTech AntiStat Fabric Softener C is dispersible in warm water (>35°C), and with its easy-to-handle high solids, low odor and no solvent smell it provides excellent softening while imparting anti-static properties to fabrics. It gives a low degree of yellowing to fabric even at higher drying temperatures. DiTech AntiStat Fabric Softener C is notably good in its re-wet properties for fabrics compared to most other fabric softener concentrates, dramatically reducing the tendencies for œwaterproofing fabrics at higher softener dosage levels, a common problem with many other softeners currently in the market. It is manufactured in USA.

DiTech AntiStat Fabric Softener B is a diamidoethyl (hydroxyethyl) ammonium methosulfate quaternary in an isopropyl alcohol (IPA) solvent. It has low volatile organic carbons and is produced from natural/vegetable-based soybean oil sources, thus making it ideal for use in consumer and I&I green-renewable formulations. It is used in finishing and drying process of textiles because it reduces the effects of exposure of ozone from the atmosphere. Accoquat 622-90 is dispersible in warm water (>35°C), and with its easy-to-handle high solids, low odor and no solvent smell it provides excellent softening while imparting anti-static properties to fabrics. It gives a low degree of yellowing to fabric even at higher drying temperatures. Accoquat 622-90 is notably good in its re-wet properties for fabrics compared to most other fabric softener concentrates, dramatically reducing the tendencies for œwaterproofing fabrics at higher softener dosage levels, a common problem with many other softeners/debonders currently in the market. It is manufactured in USA.

BIO-TERGE® AS-40 SUPER is an anionic blend developed from sodium olefin sulfonate produced via stepan's falling film process. It is an ideal surfactant for various detergent and home care applications, including dishwashing detergents, laundry detergents, and all-purpose cleaning products. It offers excellent synergistic cleaning properties, particularly when combined with dodecylbenzene sulfonic acid, resulting in enhanced product performance and potential cost savings. Moreover, it exhibits greater stability than alcohol sulfates across a wide ph range.

BIO-SOFT® S-120 is a c12.0 linear alkylbenzene sulfonic acid. Its anionic surfactant attributes include excellent detergency and compatibility with other anionic, amphoteric, and nonionic surfactants. Its high 2-phenyl content aids in maintaining clarity in liquid formulations with higher salt and active levels. Designed for a variety of hi&i cleaners, including acidic formulations, it extends its application to emulsifiable concentrates, concentrated emulsions, and suspoemulsions within the agricultural sphere.

BIO-SOFT® LFS-04 features proprietary nonionic surfactant technology specially tailored for effective hard surface cleaning applications, particularly those requiring low film/streak performance. It's highly suitable for glass and floor cleaning. Its notably low critical micelle concentration (cmc) makes it ideal for concentrated formulations that necessitate high dilution rates. It's also compatible with ready-to-use (rtu) cleaners.

BIO-SOFT® LD-190 is a concentrated blend of anionic and nonionic surfactants, serving as a suitable base for dishwashing, laundry, and household cleaning products. It imparts long-lasting flash foam and potent cleaning properties, making it well-suited for dilution into economy and intermediate formulations.

IGEPAL CA-520 is a nonionic surfactant that facilitates emulsification of non-polar hydrocarbon solvents and oils. Its applications encompass solvent emulsion cleaners, dry cleaning detergents, anti-icing additives for automotive gasoline, emulsifiers for pesticides, and floor polishes. It falls under the category of octyl phenol ethoxylates.

BIO-SOFT® LFS-07 is a proprietary nonionic surfactant technology tailored for hard surface cleaners requiring a balance between low film/streak performance and heavy-duty cleaning capabilities. This surfactant facilitates effective cleaning of both glass surfaces and heavy grease buildup in a single cleaner. It is suitable for both ready-to-use (rtu) and concentrated cleaners.

BIO-SOFT® S-101 is a c11.3 linear alkylbenzene sulfonic acid that delivers excellent detergency and compatibility with other anionic, nonionic, and amphoteric surfactants. Its versatile application encompasses various hi&i cleaning scenarios, including acidic formulations. This surfactant's utility extends to emulsifiable concentrates, concentrated emulsions, and suspoemulsions within agricultural contexts. Compliant with the u.S. Epa safer choice program's surfactant screen, it also makes an appearance on cleangredients.

BIO-TERGE® AS-90 BEADS is a high-active, spray-dried anionic surfactant that excels in wetting, foaming, and detergency. Its applications span household, personal care, and industrial contexts, including shampoos, liquid hand soaps, bath products, dust control, concrete and firefighting foams, suspension concentrates, suspoemulsions, and agricultural applications.

Pemulen™ 1622 Polymer is a lightly crosslinked, hydrophobically-modified, acrylic acid copolymer powder. It is designed to form stable oil-in-water emulsions at low use levels. It is a cost-effective polymer for low viscosity emulsions recommended for use in sprayable automotive products, polishes and protectants.

Pemulen™ 1621 Polymer is a moderately crosslinked, hydrophobically-modified, acrylic acid copolymer powder. It is designed to form stable oil-in-water emulsions at low use levels. It is a cost-effective polymer for medium viscosity emulsions recommended for use in automotive care, polishes and protectants. It is also suitable for use in anti-icing fluids.

Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed pr

H Soft® AO-12 is a 30% active lauryl dimethylamine oxide that exhibits excellent wetting and detergency properties, as well as outstanding foam boosting and grease cutting qualities. It is acid and hypochlorite stable, and compatible with anionic, cationic, and nonionic surfactants. The exceptional quality of H Soft® AO-12 makes it suitable for use in a variety of markets and applications.

Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materi

Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial appli

Petrolaid™ RDX is a low pH organic salt designed to replace traditional acids like hydrochloric, citric, phosphoric, formic, and sulfuric acids. It releases hydrogen ions on demand to dissolve calcium scale and iron oxide, offering a cost-effective and high-performance alternative. It is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate-free, and low in BOD/COD contribution.

H-Clean™ RDX is a low pH organic salt technology designed to replace traditional mineral and organic acids like hydrochloric, citric, phosphoric, formic, and sulfuric acids, along with their blends. Utilizing “on demand” technology, it releases hydrogen ions (H+) as needed to react with calcium scale and iron oxide, forming water-soluble ions. This makes H-Clean™ RDX a superior, cost-effective alternative to traditional acids. It is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate-free, and contributes minimally to BOD/COD in effluents.

WACKER® EAF 300 is a general-purpose, low-cost, low-molecular-weight reactive aminoethylaminopropyl fluid. It provides a very soft hand and exhibits the normal yellowing characteristics typically associated with amino silicones. WACKER® EAF 300 is specifically well-suited as an active ingredient in softener formulations for the impregnation of fibers and textiles.

CHT Group JAF antifoam series products are water-dispersible, active silicone defoamers of various concentrations. They are formulated to control foam in a wide variety of industrial applications that have extreme pH systems. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

Dissolvine NA2 is a chelate used in the detergent industry as a stabilizer, in the chemical industry as a metal carrier in redox systems, in the cosmetic industry as a stabilizer for preparations, and in the printing industry to control hardness and as a stabilizer.

Berol 226 is all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Berol 266 is a narrow range non-ionic surfactant based on a synthetic primary alcohol with >80% linearity.

Dissolvine 100-S is a powerful sequestering agent that can form stable, water-soluble chelates with polyvalent metal ions across a wide pH range. It is a versatile product used in various industries to control the levels of hardness and heavy metal ions.

All-Plus Chemicals AP8401G Granular MGDA is a readily biodegradable, strong complexing agent. Its performance is higher and more cost-effective. The excellent ecological and toxicological properties of All-Plus Chemicals AP8401G Granular MGDA have been tested in a wide variety of studies. Hence, it can be used as a replacement for other, less environmentally friendly complexing agents.

DeCAL 1803 is an emulsion polymer dispersion for use in rinse conditioners and acidic hard surface cleaners. It enables cold mixing in aqueous systems, which increases process speed and efficiency, and reduces energy costs in manufacturing. DeCAL 1803 provides a cost-effective way to thicken difficult cationic systems. It improves performance while promoting excellent viscosity and flow control. DeCAL 1803 can be added to formulations at any stage of manufacturing because its low, as-supplied viscosity means that it can be easily incorporated without requiring elaborate mixing facilities.

Soltellus™ 2101S is a biodegradable, anionic polymer derived from aspartic acid. Designed with versatile benefits, it serves as a polyacrylate substitute in laundry detergent. Beyond its anti-redeposition and soil removal properties, Soltellus™ 2101S offers dissolution, ion sequestering, and antiscaling capabilities. Its performance excels in cold water and all water hardness conditions.

Soltellus™ 2101L is a biodegradable, anionic polymer derived from aspartic acid. This versatile product serves as an alternative to polyacrylate in laundry detergent. It offers multifunctional benefits, including anti-redeposition, soil removal, ion sequestering, and antiscaling properties. Soltellus™ 2101L excels in cold water and various water hardness conditions.

Vinkocide® CMIK 10 New is a formulation containing 5-chloro-2-methyl-isothiazol-3-one (CMIT), 2-methyl-2H-isothiazol-3-one (MIT), and 1,2-benzisothiazolin-3(2H)-one (BIT). It penetrates microorganism cells, disrupting vital functions to prevent microbial adaptation. It offers broad antimicrobial spectrum against bacteria, fungi, and yeasts. Ideal for aqueous systems, it ensures cost-effective preservation with rapid action, making it suitable for various industrial applications such as preserving manufactured products and controlling slime growth.

Vinkocide® CMIB-WA is a formulation containing a mixture of 5-chloro-2-methyl-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (CMIT/MIT) with Bronopol. This solution effectively penetrates microorganism cells, preventing microbial adaptation by inactivating vital substrates and enzymes. It offers a rapid mode of action and demonstrates a broad antimicrobial spectrum, particularly effective against Pseudomonas species. Free of VOCs and organic solvents, it's suitable for use in aqueous systems. With excellent long-term efficacy and compliance with various ecolabels like "Blue Angel" or "European Flower," it's recommended for storage preservation, liquid-cooling systems, and slimicide applications.

Vinkocide® DBNPA 20 is a glycol-based formulation of 2,2-dibromo-2-cyanoacetamide, a potent biocide. It efficiently eradicates microorganisms, degrading harmlessly in water to ammonia and bromine ions. Highly effective against bacteria and fungi, it controls planktonic and sessile organisms, including algae. Suitable for bacterial slime cleanup in organic-rich environments, it's utilized in various applications such as papermachines and hydraulic fracturing wells. Compatible with most chemicals. Widely employed for preserving aqueous products and controlling slime growth in industrial processes, it offers cost-effective and environmentally friendly solutions.

Vinkocide® GA 50 is a biocide formulated with glutaral, designed for use in aqueous and water-miscible systems. It offers a broad antimicrobial spectrum against bacteria and fungi, ensuring effective preservation. With stability across a wide temperature and pH range, it acts quickly and exhibits good chemical stability. Formaldehyde and heavy metals free, it is suitable for various applications including the preservation of manufactured products, liquid-cooling and processing systems, and as a slimicide in industrial processes.

Vinkocide® CMIB SSM is a formulation containing a mixture of 5-chloro-2-methyl-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (CMIT/MIT) with Bronopol. This monovalent stabilized solution effectively penetrates microorganism cells, preventing microbial adaptation by inactivating vital substrates and enzymes. It offers a rapid mode of action and demonstrates a broad antimicrobial spectrum, particularly effective against Pseudomonas species. Free of VOCs and organic solvents, it's suitable for use in aqueous systems, especially those sensitive to bivalent metal ions. Complying with various ecolabels like "Blue Angel" or "European Flower," it ensures excellent long-term efficacy and is recommended for storage preservation, liquid-cooling systems, and slimicide applications.

Vinkocide® CMIK is a glycolic formulation containing 5-chloro-2-methyl-isothiazol-3-one (CMIT), 2-methyl-2H-isothiazol-3-one (MIT), and 1,2-benzisothiazolin-3(2H)-one (BIT). It penetrates microorganism cells, disrupting vital functions and preventing microbial adaptation. It offers broad-spectrum antimicrobial action against bacteria, fungi, and yeasts. Compatible with various formulations, it's suitable for aqueous systems, offering cost-effective preservation with rapid efficacy. Ideal for use in preserving manufactured products, controlling slime growth, and maintaining the integrity of working fluids.