Products in HI&I Care: Siloxanes

MultiTech Lubricant is a nonionic macro emulsion of a nonreactive polydimethylsiloxane.

ICM EM-100,000 is a 40% active emulsion of a high molecular weight dimethicone actives are delivered in an opaque, low viscosity liquid with neutral pH. This emulsion was developed as an effective release agent at low concentrations.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

WACKER® L 066 is a 100% polysiloxane polyethylene glycol copolymer. WACKER® L 066 exhibits unique high surface activity, which allows it to wet and spread effectively on nearly any surface. WACKER® L 066 is primarily used for lowering the surface tension of aqueous and non-aqueous solutions, as a highly effective wetting agent, and for the hydrophilic treatment of numerous materials and surfaces.

WACKER® L 067 is a superspreading surfactant based on trisiloxane technology. Due to its unique structure, WACKER® L 067 exhibits high surface activity, allowing it to effectively wet and spread on almost any hydrophobic surface. It has versatile applications, including use as a tank-side adjuvant to improve spray coverage and uptake, or to reduce spray volume. It can also serve as an adjuvant in agrochemical formulations.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 350 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 350 mm²/s. Its chemical structure gives WACKER® AK 350 unique properties that differentiate it from organic materials like mineral oils. It has a low solidifying point and exhibits good solubility in a wide range of solvents.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

WACKER® AK 20 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

WACKER® W 23 is a white, waxy, alkyl-modified polysiloxane that is resistant to hydrolysis and exhibits a very high affinity for various substrates. It is mainly used in the Polish sector. Due to its high substantivity, it is recommended for car polishes and paint conditioners as it renders the treated paint surface extremely resistant to detergents and weathering for long periods of time.

WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.

LIOSIL eco F 100 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 100 mm²/s. In its manufacturing process, LIOSIL® eco F 100 replaces 100% of fossil-based raw materials with renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Thanks to its unique chemical structure, LIOSIL® eco F 100 offers exceptional properties that distinguish it from organic materials like mineral oils. Notably, it exhibits a low surface tension and excellent spreading properties.

WACKER® AK 5 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its chemical structure gives WACKER® AK 5 exceptional properties that distinguish it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

WACKER® E60 1000 is a 60% emulsion of a medium-viscosity polydimethylsiloxane fluid using a nonionic surfactant system. This product has been designed to be used in many applications, such as mold release, furniture polish, automotive care, and other specialty product applications.

LIOSIL® eco F 50 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 50 mm²/s. During the manufacturing of LIOSIL® eco F 50, all fossil-based raw materials are replaced with renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Its unique chemical structure gives LIOSIL® eco F 50 exceptional properties that distinguish it from organic materials like mineral oils. Specifically, it exhibits a low surface tension and excellent spreading properties.

WACKER® AK 10 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and minimal changes in physical properties over a broad temperature range.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

WACKER® L 057 is a 100% water-dispersible, hydrolytically stable polyether-functional polydimethylsiloxane. WACKER® L 057 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 057 exhibits both special lubricant properties and antistatic action.

WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.

WACKER® TPR is a versatile product used in various applications such as car care, car polishes, paint preservatives, plastic-care products, polyurethane processing, and surface care. It is a reaction product of silicone resin with silicone fluids, resulting in the formation of water-repellent release films. These films exhibit significantly better affinity compared to polydimethylsiloxanes and many organomodified silicone fluids of similar viscosity.

WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

LIOSIL® eco F 350 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 350 mm²/s. During the manufacturing process of LIOSIL® eco F 350, all fossil-based raw materials are replaced by renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Its unique chemical structure gives LIOSIL® eco F 350 exceptional properties that differentiate it from organic materials like mineral oils. Notably, it exhibits a low surface tension and excellent spreading properties.

WACKER® L 053 is a polyether-functional polydimethylsiloxane that is completely water-soluble. WACKER® L 053 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 053 exhibits both special lubricant properties and antistatic action.

WACKER® AK 35 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its chemical structure imparts exceptional properties to WACKER® AK 35, distinguishing it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and demonstrates minimal changes in physical properties across a broad temperature range. These characteristics make it highly versatile and suitable for various applications that require these specific properties.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 50 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 50 mm²/s. Its unique chemical structure gives WACKER® AK 50 a remarkable set of properties that distinguish it from organic materials like mineral oils. These include low surface tension, resulting in high surface activity, exceptional chemical inertness, and a low solidifying point.

Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather fin

H-Sil® SDF 60,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® 1108 is a low-molecular-weight, nonionic silicone polyether surfactant blend that imparts low surface tensions to formulated products. This product improves the spreading and wetting properties of household, industrial, and coating products. In spray adjuvant applications, it gives aqueous surface tensions of less than 23 mN/M.

Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It

H-Sil® SDF 10,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.