Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Base Oil Type
- Chemical Family
- Chemical Name
- Product Type
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- CAS No.
- 9006-65-9
- EC No.
- 618-433-4
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- HII Features
- Industrial Additives Features
- Materials Features
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Home Care Applications
- Industrial Additives End Use
- Application Details
- Due to WACKER® AK 10000 many diverse applications, no general processing information can be provided.
- Parameters will vary from application to application.
- Available in a range of viscosities, WACKER® SILICONE FLUIDS AK are miscible with each other in any ratio.
- The standard product's viscosity can thus be altered to suit your individual needs.
- WACKER® AK 10000 is a non-polar liquid and is immiscible with polar solvents such as water or short-chain alcohols.
- In aliphatic and aromatic hydrocarbons, chlorohydrocarbons, ethers, esters, ketones and higher alcohols, WACKER® AK 10000 is soluble in any proportion.
- Before the product is used with solvents for the first time, it is advisable to perform a lab-scale test.
- When solvents are used, please remember to read the appropriate hazard information.
- Release agent
- Lubricant
- Hydraulic fluid
- Antifoam agent
- Water-repellent agent
- Liquid dielectric for electrical and electronic equipment
- Damping medium
- Polish additive
- Plastics additive
- Additive for textile and fiber auxiliaries
- For pharmaceutical applications, we recommend specialty silicone fluids from our SILFAR® line.
- Silicone fluids from our BELSIL® line are available for the cosmetic sector.
- Whenever particularly high heat and shear resistance is required, we recommend silicone fluids from our AK stab, AK visc and AKC product lines.
- Specialty grades of the product (available as WACKER® PLASTICIZER) will be needed for use as a silicone plasticizer in RTV-1 sealants.
Properties
- Color
- Physical Form
- Appearance
- Clear colorless liquid
- Typical Properties
Value Units Test Method / Conditions Density (at 25°C) approx. 0.97 g/cm³ DIN 51757 Flash Point min. 320 °C ISO 2592 Ignition Temperature 450 °C DIN 51794 Kinematic Viscosity approx. 10000 mm²/s DIN 53019 Refractive Index (at 25°C) approx. 1.404 - DIN 51423 - Properties
- Minimal change in physical properties over a broad temperature range
- Excellent water-repellent properties
- Good dielectric properties
- Low surface tension and thus high surface activity
- Chemically highly unreactive
- Low solidifying point
- High heat resistance
- High flash point
- Good solubility in a wide range of solvents
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Maximum temperature allowed during storage and transportation: 50 °C