Products in Jacketing & Insulation

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T-FDC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

Securoc® 014 is composed of 50 - 70% huntite, 30- 50% hydromadnesite, and less than 1% quartz. It is a white solid that decomposes at more than 250°C and has a pH of 10. This non-oxidizing product has various commercial and industrial uses.

Securoc® D 020 is composed of 50 - 70% huntite, 30- 50% hydromadnesite, 1 - 2% stearic acid, and less than 1% quartz. It is a white solid that decomposes at more than 482°F and has a pH of 9 - 10. This product has various consumer uses.

JetFil® M600c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 625C is a very fine, high-purity, extremely platy, off-white talc with excellent top-size control that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics. JetFil® 625C is also ideal for the nucleation of semi-crystalline plastics, for plastic films, for foamed plastics, and for flame retardant applications.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 625H is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 575C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

SNOBRITE® 60 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

SNOBRITE® 68 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

SNOBRITE® 75HB is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

SNOBRITE® SP is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

SNOBRITE® 75 is a white extender pigment that is produced from air-floated intermediate kaolins. With a plate-like crystal structure and high aspect ratio, SNOBRITE® provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. Its tendency to slowly build viscosity makes SNOBRITE® a cost-effective formulating tool to enhance performance without adversely affecting production rates. Its additions also improve critical working properties, including extrusion, calendaring, mold release, and handling.

CONSTAB CONSLIP® 205 HD is a permanent slip agent designed for use in the inner layers of cable ducts. It's suitable for polyethylene (PE) and resin-based materials and finds applications in the building and construction and electrical and electronics markets, particularly for pipes and plumbing and jacketing and insulation, including cables and pipes.

St. Louis Group Antimony Metal is a versatile ingot form of antimony, serving a range of vital roles. This metal finds its significance in applications such as batteries manufacturing and soldering flux, contributing to the creation of cables and supporting electrical and electronics markets. As an essential component in technical salts and inorganics, it embodies the prowess of antimony compounds. Antimony Metal is available in 4 grades: G1,G2,G3,G4.

Z-NOX® 1076 is an antioxidant mainly utilized in the electrical and electronics market segment, particularly for wire and cable applications like jacketing and insulation. It falls under both polymer additives and elastomer additives categories, functioning as an antioxidant. This product is compatible with various polymers and resins including acrylics, ABS, polycarbonates, polyethylenes, polyoxymethylene, polypropylenes, polyurethanes, PVC, and polystyrenes.

Z-NOX® MD24 is an antioxidant and metal deactivator for both plastics and elastomers. It's available in granules and powder forms. This product is compatible with various polymers such as polypropylenes, polyurethanes, PVC, and thermoplastic elastomers. Z-NOX® MD24 is odorless and comes in cartons packaging.

MagFlam® MDH-3 is a remarkable flame retardant solution enriched with Magnesium Hydroxide. As a part of our inorganic offerings, this powder stands out for its fire-resistant properties. MagFlam® MDH-3 finds its place in various industrial applications, including chemicals production and wire & cable manufacturing. Its effectiveness as a flame retardant makes it a valuable choice for both industrial processes and electrical uses, especially in wire & cable jacketing and insulation.

Z-LITE® 62 is an efficient hindered amine light stabilizer, holds significance in PVC and PVB applications. Its appearance can vary between white or yellow powder or granules. With attributes like low volatility and a low melting range, it excels in agricultural films, wire, and cable applications. It's also compatible with pigment systems and those using carbon black.

SmokeShield® ZB8 is a versatile additive catering to the flame retardant needs of plastics and elastomers. With its dual functionality as both a flame retardant and a smoke suppressant, this product is especially suitable for applications like cables and wires made of polyvinyl chloride (PVC). Notably, SmokeShield® ZB8 also serves as a char forming agent, adding an additional layer of fire protection.

Z-NOX® TBM6 is an antioxidant designed for Plastics & Elastomers applications. This essential additive, belonging to the chemical family of phenols, effectively counteracts oxidation processes. Z-NOX® TBM6 comes in a powdered physical form, making it suitable for use in multiple applications, including wires and cables. It enhances the material quality, stability, and performance of plastics and elastomers in the electrical and electronics industry, as well as other industrial uses.

VANQUISH™ 100 Antimicrobial is based on the active agent N-butyl-1,2-benzisothiazolin-3-one (BBIT) and is recommended for use in tough and demanding applications especially those exposed to high UV levels. It is a broad spectrum antimicrobial used to prevent fungal, bacterial, and algal spoilage of polymers such as PVC, polyurethane, silicone, polyolefin, polyester, and acrylic articles such as shower curtains, coated fabric, vinyl wall coverings, floor coverings, appliance gaskets, wall and floor coatings, and swimming pool, pond, and ditch liners.

Z-LITE® 3346 is a Hindered Amine Light Stabilizer (HALS) designed for enhancing the durability of plastics and elastomers. This product functions as a light stabilizer, suitable for various polymers and resins including acrylonitrile butadiene styrene (ABS), polyamides, polyethylenes (PE), polypropylenes (PP), polyurethanes (PU), polyvinyl chloride (PVC), polystyrenes (PS), and thermoplastic polyurethane (TPU). Z-LITE® 3346 is particularly valuable in applications such as cables, fibers, films, pipes, textile applications, and tubing.