Products in Jacketing & Insulation

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Violet Concentrate is a color concentrate in violet color designed to be used in medium flow PFA (Perfluoroalkoxy) for pigmentation. It is available in the form of small pellets, approximately 0.080 inches long by 0.080 inches in diameter. It is used to add color to injection-molded parts, film, tubing, colored wire or jacket insulation when a pigmented appearance is desired.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Yellow Concentrate is a yellow color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 White Concentrate is a white color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Orange Concentrate is an orange-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Brown Concentrate is a brown color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Pink Concentrate is a pink-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ F-LaserWrite is a series of concentrates that can be used to add written identification to wire and cable applications using laser marking. These concentrates can be added to the jacket or insulation resin along with a standard color concentrate to allow for easy marking. Fluon+™ F-LaserWrite is made from a variety of fluoropolymer resins and is supplied in cylindrical pellet form.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Aqua 9 Concentrates are aqua-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1010 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1010 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Brown Concentrate is a brown color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Gray Concentrate is a gray color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Orange Concentrate is an orange color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Blue Concentrate is a blue-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Green Concentrate is a green color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Gray Concentrates are gray-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Brown Concentrate is a brown-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Yellow Concentrates are yellow-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Green Concentrates are green-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Blue Concentrate is a blue color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Green Concentrate is a green color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Green Concentrates are green-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Orange Concentrate is an orange-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Black Concentrate is a black color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-1120 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-1120 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Green 10 Concentrates are green-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 White Concentrate is a white-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 White Concentrate is a white-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Brown Concentrate is a green-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Orange Concentrates are orange-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.