Products in Other Packaging & Assembly Applications

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

Elastomers Part A are a black product for photovoltaic wet manufacturing processes requiring a wide range of chemical resistance. Elastomers Part A provides an excellent combination of properties (resistance to acids/bases) and is the product of choice for wet processes as an upgrade from standard elastomers, i.e., FKM, NBR, EPDM, etc. A maximum service temperature of 230°C is suggested.

MultiTech MultiFunctional L is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparency LED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs MultiTech MultiFunctional L is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Pacur® PETG DTC copolyester sheet is designed for use in cost effective ESD safe packaging and “one way” shipping applications. The sheet is extruded from an amorphous polyester resin and treated with a proprietary electrostatic dissipative material forming a clear, tough, chlorine/chloride-free, ESD safe packaging material.

CELLETS® 175 is an insoluble starter pellets for combination drug formulations

ADVANCENE™ EM-4925-AAH HDPE Resin is specifically designed for use in either intermittent or continuous blow molding equipment to produce containers up to 30 liters in size - applications that require the combination of outstanding environmental stress crack resistance (ESCR) and high impact strength.

EVERNOX-1330 is used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, molded articles, wires and cables, dielectric films etc. Furthermore, it is applied in other polymers such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. It may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates.

ADVANCENE™ EE-1802-BSB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-BSB resin have very good tensile and toughness properties.

MU-209A Its functions are flexible, low stress, stress release, and shock absorption.

ExTech Plastics is proud to introduce the newest addition to our PET product offering. The VERSATECH™ PET 3420 (2-lane Black/Clear PET) and the VERSATECH™ PET 3430 (3-lane Clear/Black/Clear PET). Utilizing the best material as a base of manufacturing, ExTech Plastics brings to market the new VERSATECH™ 3420 and 3430 material with unrivaled quality. These products provide supreme clarity and impact resistance properties. VERSATECH™ 3420 & 3430 SIDE BY SIDE PET is ideal for a wide variety of applications like food, automotive, medical, electronic, consumer and industrial packaging.

Epiall® 1960B-1 by Sumitomo Bakelite Company is comprised of Ethylene Propylene Copolymer. It is commonly used It is available in Granules form.

PLASTICYL™ PBT1501 is a conductive masterbatch based on Polybutylene Terephthalate loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ PBT1501 is ideal for injection molding and extrusion processes.

MECOSTAT-3/549 is a highly effective liquid, water-based additive for antistatic finishing ofexpandable polystyrene and polypropylene.Due to the fact that the material is not corrosive (content of Chlorides, Sulfates, Nitrates,Phosphates etc. is < 10 ppm), it is well suited for applications in electronic packing.The antistatic agent acts even at a low relative humidity and provides a stable, permanentantistatic finishing for several years.

The MU-120B performs the following functions: flexibility, low stress, heat resistance, stress release, and shock absorption.

MECOSTAT-3 surface antistatic agents are highly effective liquid coating materialsfor the antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature guarantees that subsequent thermoformingcan be performed without suffering any damage. Furthermore, the antistatic finishingof the material remains virtually unaffected by the stretching of the material during thethermoforming process.MECOSTAT-3/247 is based on isopropanol solvent. It is very suitable for the applicationon flexographic and gravure printing systems.

Advancene™ EM-4810-AAH HDPE Resin is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability which contribute to uniform wall thickness in large parts.

HiFi Industrial Film SU320 Is a high clarity, high gloss, heat-stabilized polyester film manufactured by HiFi Industrial Film. It has an adhesion promoting pre-treat on both sides and is suitable for flexible circuits, membrane touch switch, specialized graphics and other applications where it is important to have the minimum level of shrinkage during processing.

Guangzhou Lushan New Materials EV1050G1/RF is EVA film for encapsulating solar modules Lushan EV1050G1 is mainly used for PV module encapsulation. It's based on an ethylene vinyl acetate (EVA) copolymer and supplemented by special Chemical Accessories.

Beijing Evergrow Resources PVDF SHEET sheet has the good corrosion resistance ; good mechanical properties; good thermal and electrical properties and good aging resistance ,it's widely used in petrochemical , metallurgy,food,paper ,textiles,semi-conductor,mechical engineering,medcine,nuclear insdustries. and PVDF sheet back with glass fiber can as the good lining materials used in Cheimal popes and tanks.