Products in Electrical & Electronics: Plasticizer

Shandong Xuye New Materials CPE135C has medium degree of crystalline and good melting fluidity. It is widely used in ABS, PE, PP and other plastic injection molding products to improve the flame retardant performance and increase compatibility.

Ekflex 1081 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

PureFlex O1510 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

JSR DYNARON6200P (hydrogenated polymer) is used as resin modifier and compatibilizer. It is in the form pellet.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

EKFLEX 882 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

Varteco Quimica Puntana KALFLEX-13 A is a Food- grade Epoxidized Soybean Oil Most flexible PVC compounds and some rigid PVC compounds benefit from adding this kind of plasticizer. Although light and heat stability is improved by adding 2 or 3 phr, the percentage of use can significantly increase because KALFLEX-13 has the same plasticizing efficacy as DOP. Consequently, it can efficiently substitute it by adjusting some mixture and process parameters in order to compensate its lower activity. Its use includes different kinds of compounds such as PVC, nitrocellulose, chlorinated rubber and PVC copolymers, etc. ADVATAGES: *Approved for Non- toxic formulae. *It gives PVC formulae resilience to the extraction through oil, naphtha and soapy water. It resists substrate migration like polystyrene and nitrocellulose. *It has low volatility and its use is recommended in anti- fogging formulae for automobile industry. *It does not modify the softening point of rigid compounds. *It is an excellent dispersing agent suitable for pigments and sponge agents. *It offers excellent light and heat stability. It gives an ideal effect when combined with Barium- Cadmium and Calcium- Zinc stabilizers. In addition, it also synergistically works with lead and tin organo- metallic compounds. As an example, a formula with a Ba-Cd stabilizer level of 1.5 phr and KALFLEX-13 shows the same resilience to heat and light than a formula having only a stabilizer level of 3 phr. * Epoxidized plasticizers are also useful in other areas such as alkyd resins modifiers, metallic primer stabilizers, nitrocellulose varnish modifiers.

Natro-Cel 6400-A is a blend of glycol adipate and silicon dioxide. It functions as a plasticizer with low odor, low volatility and good compatibility.

Elafleks® TOTM (Trioctyl Trimellitate) is a copolymer used in all applications of PVC resin and a plasticizer. Tools for applications requiring insulation Gaskets, Automotive internal electrical parts, wire and cable insulation, vinyl compounds.

Shandong Xuye New Materials CPE135AH has high plasticizing rate, which is suitable for high-speed extrusion. It can be total or part replaces ACR, MBS modifier.

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Shandong Chuanjun Chemical DOS for excellent cold-plasticizers has plasticized high efficiency, low volatile, it has an excellent cold resistance, have better heat resistance, electrical insulation and lightfastness, applicable to PVC, chlorine Ethylene copolymer, Glauber cellulose ester, ethyl cellulose and synthetic rubber, and other resins. Particularly applicable to production of cold wire and cable materials, leather, film, sheet metal, such as sheet. Chang and phthalate esters at the same time. As a variety of low-temperature synthetic rubber used plasticizers, rubber vulcanization of no effect.

Shouguang Derun Chemistry DRPF001 Top grade is used as Flame-retardant plasticizer for plastic ,resin and rubber,Widely for all kinds of soft PVC materials,especially transparent flexible PVC products,such as PVC terminal insulation sleeves, PVC mining air pipe, PVC flame retardant hose, PVC cable, PVC electrical insulation tape, PVC conveyor belt, PVC packing film etc PU foam PU coating NBR, CR Lubricating oil, TPU, PC/ABS, EP, PF ,etc.

Flexricin P4 DLC-A is a methyl acetyl ricinolate silicon dioxide blend plasticizer and processing aid for low temperature specification rubber compounds. Low volatility.

Shandong Chuanjun Chemical Dioctyl phthalate(DOP) is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber.

Varteco Quimica Puntana KALFLEX-11 (DOA) is a monomeric plasticizer having good compatibility and high effectiveness. The most important feature is that compounds that maintain flexibility at very low temperature can be obtained. At room temperature, softer compounds than KALFLEX-10 (DOP) can be produced. It is used in the manufacture of plastic fabrics to give a dryer appearance.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Shandong Yuanli Science and Technology Dioctyl Adipate(DOA) is a typical cold resistant plasticizer of polyvinyl chloride, vinyl chloride copolymers, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.High plasticized efficiency. Products can be given to low-temperature flexibility and good lightfastness.Used with the DOP,DBP plasticizer for cold agricultural film, frozen food packaging film,wire and cable coating, leather, sheet metal and outdoor used etc.

Shandong Xuye New Materials CPE130A is a magnetic rubber special brand. It has the characteristics like: good fallibility, high tensile strength, easy processing and low temperature resistance.

WSD Chemical Dioctyl adipate/DOA Super Grade is a typical cold resisting plasticizer for vinyl chloride polymer and its copolymer, polystyrene,cellulosic resins and synthetic rubbers. It imparts a high plasticizing efficiency,less color change during light and heat attack,good softening property at low temperature.Usually applied in cold-resisting agricultural film,artificial leather,wrapping layer for electric wires,and water tubes for outdoor use.

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

PureFlex E1540 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

Natrochem DOP DLC-A is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.

JSR DYNARON9901P (hydrogenated polymer) is used as resin modifier and compatibilizer. It is in the form pellet.

EKFLEX 2000 is a non-phthalate plasticizer that boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Paychlor K-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

ACTFLOW® CBB-3098 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent..

Ekflex 8815 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

ACTFLOW® NE-3000 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent..

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Varteco Quimica Puntana KALFLEX-10 (DOP) is a primary plasticizer par excellence. It has low volatility, good heat and light stability and good compatibility with all PVC resins. KALFLEX-10 is also compatible with other polymers such us alkydic resins, butadiene acrylonitrile, chlorinated rubber, cellulose nitrate, PVC/PVA copolymer, etc.