Products in Electrical & Electronics: Plasticizer

WSD Chemical Dioctyl phthalate/DOP Super Grade is one of the most useful plasticizer,it shows properties of the plasticizing efficiency, low volatility, light-resistant, water-endurance, weathering resisting, good electrical functions,and fine softening effect,etc. Extensively used in processing electrical wires and cables, artificial leathers, films and molding plastics from polyvinyl chloride, vinyl chloride copolymers and cellulosic resins.

SD Korea SFR-65 is a flame retardant is low viscosity liquid type FR plasticizer of phosphoric organic ester chemicals.

Shandong Chuanjun Chemical Dioctyl phthalate(DOP) is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber.

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

ACTFLOW® UT-1001 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® UT-1001 is recommended as a plasticizer replacement, modifying agent and additive agent.

WSD Chemical Dioctyl terephthalate/DOTP is a a good main plasticizer of PVC plastics. Compared to DOP, it offer better heat , anti-freezing, not volatile,anti-taking and flexibility. Because of low volatility, can be used to produce wire and cable working in low temperature,and is widely used in 70 ° C -resisting cable (Standards of International Electrotechnical Commission) and other soft.PVC products. Besides, it also can be used in leatherette and film.as plasticizer of PE alcohol butyral, acrylonitrile-butadiene rubber, cellulose nitrate and synthetic rubber. It also can be used as coating additives,lubricant of precision instruments, lubricant additives, or softener of paper.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

EKFLEX 892 is a non-phthalate plasticizer based on trioctyl trimethylate (TOTM) that is particularly well suited for applications requiring good non-migration properties at high temperatures and retention of mechanical properties.

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Maureen is a new generation Makwell Plasticizers Non Phthalate Plasticizer and is light yellowish in color, It has an Excellent compatibility with PVC resin when used along with other primary plasticizers such as DOP/DPP/DPHP/TOTM/DOA and secondary plasticizers such as Chlorinated Paraffin.

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

JSR DYNARON2324P(hydrogenated polymer) is used as resin modifier. It is in the form of pellet.

Vatan Plastik San. Tic. AS Diotyl Phthalate (DOP) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Varteco Quimica Puntana KALFLEX-16 (DINP) is a primary plasticizer similar to KALFLEX-10 (DOP). Their differences vary according to the increasing molecular weight. It is less volatile, has less power as solvent and less plasticizer effectiveness. As a result, it is adequate to be used in plastisols when formulae with low viscosity and low level of plasticization are required. It is also used with KALFLEX-10 to regulate the final viscosity of plastisols. Additionally, it can be used in high temperature compounds due to its lower volatility.

IPPP35 is halogen‐free flame retardant phosphate ester plasticizer, the two will not pollute the environment; in the viscosity of the phosphate species is the lowest, the highest phosphorus content of a model. This product is colorless and transparent, good compatibility, but also by both flame‐retardant plastic, flame retardant and plasticized material in between play a balancing role, so raw materials can change their character and physical properties, widely for fabric coating, circuit boards, flooring, textiles, PVC, phenolic resin, and other fields.

PureFlex E1510 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

WSD Chemical Epoxidized soybean oil/ESBO Grade One is the most widely-used epoxide plasticizer and stabilizing agent of polyvinyl chloride.It has good compatibility with PVC resin. It has low volatility and little mobility. And it has great thermostability and light stability. It's water-proof and oil-proof. We can use it to make the products have good mechanical strength, resistance to elements and electrical property. What's more, it's nonpoisonous and can be used as the assistant of food package materials which has been authenticated internationally. It is soluble in hydrocarbon, ketone, esters, higher alcohols and slightly soluble in ethanol.

Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.

UPC Group DINP has good compatibility with PVC and high plasticizing efficiency. DINP has better performance than DOP in electrical insulation, durability, heat-resistance and low volatility. In addition, customers can produce higher volume products (like PVC film and sheet) with DINP formula.

WSD Chemical Dioctyl sebacate/DOS First Grade is a superior cold-resisting plasticizer,it has good plasticizing effect and better heat endurance,light-resisting and electrical properties. It is chiefly used in processing polyvinl chloride and its copolymer,cellulosic resins and synthetic rubbers,etc..It is usually mixed with phthalic esters in use to minimize its migration rate.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Elafleks® DINP (Diisononyl Phthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC and Floor Covering production.

ACTFLOW® NE-1000 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent..

ACTFLOW® CB-3060 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® CB-3060 is recommended as a plasticizer replacement, modifying agent and additive agent.

Trigon Chemie Dipropyleneglycol dibenzoate is used as a recommended substitute for phthalate plasticizers. Adhesives, PS sealants, caulks, resilient flooring, PVC, PVC coated cloth, artificial leather cloth, paints, inks, and pesticides are some of the applications.

UPC Group DEHP (DOP) has good compatibility with PVC and high plasticizing efficiency. It is the most widely used general-purpose plasticizer and has the average performance of various plasticizers. The maximum dosage is 150 phr.

Varteco Quimica Puntana KALFLEX-13 is Epoxidized Soybean Oil Most flexible PVC compounds and some rigid PVC compounds benefit from adding this kind of plasticizer. Although light and heat stability is improved by adding 2 or 3 phr, the percentage of use can significantly increase because KALFLEX-13 has the same plasticizing efficacy as DOP. Consequently, it can efficiently substitute it by adjusting some mixture and process parameters in order to compensate its lower activity. Its use includes different kinds of compounds such as PVC, nitrocellulose, chlorinated rubber and PVC copolymers, etc. ADVATAGES: *Approved for Non- toxic formulae. *It gives PVC formulae resilience to the extraction through oil, naphtha and soapy water. It resists substrate migration like polystyrene and nitrocellulose. *It has low volatility and its use is recommended in anti- fogging formulae for automobile industry. *It does not modify the softening point of rigid compounds. *It is an excellent dispersing agent suitable for pigments and sponge agents. *It offers excellent light and heat stability. It gives an ideal effect when combined with Barium- Cadmium and Calcium- Zinc stabilizers. In addition, it also synergistically works with lead and tin organo- metallic compounds. As an example, a formula with a Ba-Cd stabilizer level of 1.5 phr and KALFLEX-13 shows the same resilience to heat and light than a formula having only a stabilizer level of 3 phr. * Epoxidized plasticizers are also useful in other areas such as alkyd resins modifiers, metallic primer stabilizers, nitrocellulose varnish modifiers.

WSD-800 is a colorless transparent oily liquid PVC plasticizer obtained from vegetable oil through catalytic hydrogenation, hydrolysis, dehydrogenation, distillation and esterification.

WSD Chemical Trioctyl trimellitate/TOTM used as a heat-endurant and long-lasting plasticizer for polyvinyl chloride,usually for preparing Grade 105℃ electrical cable and other heat-resisting plastic products.It possesses both advantages being used as plasticizer for polyesters and for general purposes. Except producing oilresisting ones,also used in preparing any long-lasting products.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

PureFlex E1701 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

avanSTATIC NBR 535 is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

North Wanxing Chemical Co., Ltd. Dimethyl Sebacate is a colorless and transparent oil, is compatible with benzyl cellulose, cellulose aclate, cellulose acetobutyrate, cellulose acetopropionate, chlorinated rubber, ethyl cellulose, polystyrene, polyvinyl butyral and vinyl plasticizer, softening agent and solvent for cellulose resin, polyethylene resin and synthetic rubber.