Products in Consumer Goods: Prepreg

NMG Composites CPT-6K is an intermediate material of a composite material, which is made of carbon fiber yarn, resin matrix, release paper and other materials through coating, hot pressing, cooling, laminating, coiling and other processes, also known as carbon fiber prepreg with Plain woven, 6K Conbon fiber Prepreg.

The Evopreg® ampliTex™ + powerRibs™ system, it is possible to match the stiffness of traditional carbon-fiber components, while also reducing component weight. PowerRibs™ are a natural fiber reinforcement grid, designed to provide a significant increase in stiffness for only a minimum increase in weight. Provided as a dry reinforcement supported on a lightweight veil, they are incorporated into a layup which combines standard Evopreg® ampliTex™ prepreg with a specially-tailored resin-rich variant.

HexPly® 954-3A is a 350ºF (177ºC) curing cyanate resin with a 400ºF (204ºC) glass transition temperature. Standard cure is two hours at 350ºF (177ºC). Glass transition temperatures can be maximized by a free-standing post cure at 450ºF (232ºC). HexPly® 954-3A is a controlled flow cyanate resin designed for autoclave and vacuum bag curing. HexPly® 954-3A can be impregnated on all available fibers and fabrics. The recommended lay-up procedure for HexPly® 954-3A is HSP-L3. The recommended cure procedure is HSP-C1. Typical applications for HexPly® 954-3A are primary and secondary space structures where dimensional stability and low moisture absorption are required.

HexPly® M92 combines all the key benefits achieved individually with other 125ºC curing epoxy resins, in one new system with no compromise: very good hot-wet performance, high toughness, self-adhesion, fire resistance and long out/tack life. This multi-tasking system has elevated hot wet Tg performance, allowing HexPly® M92 to operate at higher service temperatures, while still benefiting from the lower cost 125ºC cure. HexPly® M92 is available in a wide range of prepreg forms (woven and UD tape).

HexPly® M18 has been developed to fulfill the requirements of the aerospace industry for primary structures using standard manufacturing processes. The matrix has improved properties which allow easy layup, good tack life, and a good component surface finish. A low moisture uptake allows good hot/wet performance up to 302°F (150°C) and a general service temperature up to 356°F (180°C).

MTC9810 is a revolutionary graphene enhanced, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish along with enhanced resin toughness. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

HS Carbon Fiber UD125H60 is a E3 Matrix System with a precursor as PAN.

PREGNIT TP-PU is printable, suitable for backing splash, back-foaming, Deep drawing and thermoforming, high wear resistance.

HexPly® 920 is a very tough advanced resin matrix, ideally suited to the single-shot production of honeycomb sandwich structures and the manufacture of solid laminates. It is highly tolerant of a variety of production techniques and equipment, making it easy to process. The high toughness of HexPly 920 makes it ideal for industrial applications and performance cars. It is available preimpregnated into carbon, glass or aramid fibers.

Deltapreg DT150 is a Automotive with Exterior Application.

IM Carbon Fiber UD100H60-MR70 is a E3 Matrix System with a precursor as PAN.

HexPly® M76 is a versatile curing toughened epoxy resin that can be cured from 275ºF (135ºC) to 350ºF (177ºC), depending on service temperature requirements. HexPly® M76 is formulated for lower temperature autoclave or press mold processing. The recommended lay-up procedure for HexPly® M76 is HSP-L4. The recommended cure procedures are HSP-C5 (275ºF) or HSP-C1 (350ºF).

HexPly® M34 is an epoxy system, specifically developed for low temperature curing of large structural components, particularly in industrial markets. HexPly® M34 is a self-extinguishing system, providing excellent fire-resistant properties, and meeting the German and French rail qualifications DIN 5510, S3-SR2-ST2 and NF F 16-101 (M2, F1). HexPly® M34 prepreg is ideal for manufacturing sandwich structures, providing excellent adhesion to PVC foam cores. HexPly® M34 exhibits a good shelf life at Room Temperature for a low temperature curing system.

HexPly® 954-6 is a 250ºF (121ºC) curing toughened cyanate resin with 300ºF (149ºC) Tg. HexPly® 954-6 is formulated for autoclave curing. Recommended cure is three hours at 250 F (121ºC). Service temperatures are maximized by a post cure of 350ºF - 450ºF (177ºC - 205ºC). The recommended lay-up procedure is HSP-L3. The recommended cure procedure is HSP-C4. Typical applications for HexPly® 954-6 include space structures, such as solar arrays, antennae and support structures, or any application where impact resistance, light weight, excellent dielectric and low outgassing properties are required. HexPly® 954-6 can be impregnated on all available fibers and fabrics.

GMT sheet G Sheet - GS is a high-strength, high-impact, recyclable composite material formed by the corresponding molding process with glass fiber mat as the reinforcing material and thermoplastic resin as the base material.

HexPly® M26T is an advance modified epoxy resin developed for aerospace and industrial markets.Its controlled flow, high peel strength on honeycomb cores and excellent fire behavior give it a cost saving potential for interior and secondary sandwich structures. Combined with HexPly® M25 glass phenolic prepregs, it is qualified to Airbus specifications.

NMG Composites CPP-12K is an intermediate material of a composite material, which is made of carbon fiber yarn, resin matrix, release paper and other materials through coating, hot pressing, cooling, laminating, coiling and other processes, also known as carbon fiber prepreg with Plain woven, 3K Conbon fiber Prepreg.