Products in Other Building & Construction Applications

Berolan LP-W2 is a pure sodium lauryl sulfate that has been spray-dried particularly finely. Due to the particularly high fineness, an excellent distribution in dry mortar can be achieved. This also leads to a particularly high effectiveness. Berolan LP-W2 is a high-performance air-entraining agent and an excellent wetting and plasticizing agent for mortar and plasters. Berolan LP-W2 is an excellent foaming agent and plasticizer for the manufacture of ready-to-use plasters, mortar compounds, and filling compounds containing gypsum, lime or cement. Berolan LP-W2 effects the formation of particularly fine, stable air bubbles, thereby considerably improving the General performance of resistance, water retention as well frost stability. Tendency towards contraction and crack formation is also reduced as is wear and tear to mixing apparatus and conveyors. Due to its surface active character Berolan LP-W2 additionally promotes wetting of binders and other ingredients, thus entailing a swifter wetting and dispersion and reducing the tendency towards aggregation during mixing. The necessary quantity depends on the desired effect but generally is between 0.005 – 0.1 %, calculated on the dry mix. In the majority of cases 0.01 % proves sufficient to obtain adequate aeration. The equipment available must also be taken into account, where batch operated mixers generally feed more air into the mortar. Through the purposeful air entrainment the yield is significantly improved. A very quick wetting ensures less entry of coarse air pores and reduced nodule formation (dry spots/knots).

Solu-Cell E4000 is a chemically cross linked polyolefin based foam material.

Stellarchem AB845EM TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material. AB845EM is specially used for bonding with ABS, PETG, PC/ABS, PC, etc.

Arabian Chemical Industries ISOLA PSM is a high range, water reducing, superplasticizing admixture for concrete that meets the requirements of ASTM C 494 type A, F and BS EN 934-2. The formulation is based on sulphonated naphthalenes and do not containchloride ion. Specially formulated for concrete containing microsilica and reactive pozzolans.

Cel-Span® Process Aid 705 is a product recommended as a replacement for the traditional phenolic and hindered amine combination for the thermal and ultraviolet stabilization of polyester resins during high temperature processing. Cel-Span® Process Aid 705 enhances the process window of Polyester and PET resins. In addition, this product maintains the IV (Intinsic Viscosity) of Polyester and PET resins coupled with excellent UV stability. Cel-Span® Process Aid 705 also provides protection to caustic environment and bleach resistance to Polyester and PET resins with both bottle and fiber grade products. It is important that this product be used at 2% - 3% with the Polyester or PET resin before the fabrication or molding process to take advantage of the excellent properties of the unique masterbatch. It will insure that the polyester resin is protected through the molding and life cycle of the parts

Silpak RU-470 is a liquid, two-component, 100% solids Urethane Elastomer RTV that is easily processed. This system provides a firm, semi-flexible, durable and abrasion resistant rubber compound. Used for a variety of applications including molds, concrete texture stamps and form liners, and rubber parts. Molds are used to cast concrete, wax, and plaster parts.

Superflo 443 is a high molecular weight, high-range water-reducing admixture formulated to produce high slump concrete at lower water to cementitious ratios. Concrete produced with Superflo 443 shows increased flowability while maintaining early and ultimate compressive and flexural strengths. Superflo 443 is specially formulated to retain slump for extended periods of time, enabling it to be dosed at the batch plant or job site throughout the entire dosage range with normal set times.

TRACEL® DB 170 FINE is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

CHS-EPOXY 474 is a Low viscosity epoxy system. Low viscosity epoxy system, for use at lower tepmperature. Standard epoxy system, low temperature, wet conditions, very fast hardening. Standard epoxy system, wet conditions. Epoxy resin modified with mono-functional reactive.

Lifocolor WHITE 70 PP is based on various carrier polymers, which facilitate the qualified white coloring of a variety of engineering polymers and standard types. These products are available from stock; products not in our standard assortment are available upon request. Lifocolor's range also has white masterbatches with low and no titanium Oxide content for common standard types and engineering polymers. The incredible coloristic characteristics of TiO2), are generally not completely achieved and must be compensated with a higher dosage. The use of compostable polymers is becoming ever more important for this reason. Our Lifocolor assortment includes an Increasing selection Of white masterbatches based on biodegradable polymers and bio-based carrier systems made of renewable resources that also meet the requirements for composability under EN 13432.

NYPOL® A3 G30 HS RH UV PRTA011 NR393K is a 6.6 black polyamide with 30% thermostable fiberglass with UV protection

Arabian Chemical Industries ISOPLAS PC 300 is a new generation superplasticizer based on polycarboxylate technology. It is formulated to provide medium to high water reduction while providing excellent flowability, slump retention and high mechanical strengths. Super high strength and self-consolidating concrete can be attained depending on dosage and mix design.

ULTRA-PLAST™ WF101 contains amide, which has reactive sites available for hydrogen bonding and can therefore act as a coupling agent between polymer and filler. ULTRA-PLAST™ WF101 acts as an efficient blending and dispersing agent in wood filled systems, leading to a more homogeneous blend. ULTRA-PLAST™ WF101 works as an excellent lubricant under high shear conditions, for example injection molding.

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

REPIN Masterbatches Black Molding 28-1725 is used in Injection Molding applications. We manufacture Black Masterbatches in the standard range based on all types of polymers used in the Plastics Industry including PE, PS, EVA and universal polymers. Our products range from carbon blacks that provide high jetness, UV protection and food contact approval to more economical blacks that impart just color.

Sinobase Polymers Chemical 328 is a pale yellowish powder melting point 81, soluble in benzene, toluene, ethyl acetate and petroleum ether, slightly soluble in ethyl alcohol and methyl alcohol insoluble in water.

Crown Foam Technologies Medium Density Vinyl Foam 10#-14# is the perfect solution for the more challenging environment that partners flexibility and wear-resistance. CVM114 is available in duel density, multi layered colored logs.

Iron oxide Yellow CI PY.42 313 is an important inorganic colorant, iron oxide yellow is characterized high opacity, strong tinting strength, easy dispersibility, excellent light fastness and perfect weather resistance. It is extensively used in concrete, roofing tile, paver, stucco, masonary, paint, coating, rubber, plastic, paper and leather industries etc.

POLYB® AM-07 is an additive added to attain a matte finish and/or to lower the gloss of a plastic part. Effective in lowering gloss of ABS, PC/ABS alloy, ASA and keep the physical properties of resin.

Cales De Llierca Precipitated Calcium Carbonate (Pcc) is a precipitated calcium carbonate with scalenohedral morphology. Its particular structure, purity and size distribution curve enable increased whiteness and opacity when it is used as filler in paper.

IRRH Speciality Chemicals Zinc Stearate ISC-350 is biodegradable and non-toxic.

Nayakem Di Cyclo Hexyl Phthalate (DCHP) is used as a plasticizer in heat sealable films and as coplasticize in poly vinyl chloride. It is used in print inks and Special inks. DCHP used as a Primary or a secondary plasticizer for many polymers including nitrocellulose, ethyl cellulose, chlorinated rubber, poly vinyl acetate and poly vinyl chloride.

44 BLUE™ is a medium strength anaerobic threadlocker for all types of metal fasteners. Use 44 BLUE™ on those jobs requiring a reliable fast setting anaerobic thread locker that allows for future disassembly of parts using hand tools and moderate effort. It works by unitizing the fastener assembly, effectively sealing the thread path against fluid leaks and corrosion. The result is disassembly at a known unchanging torque, anytime in the future, regardless of the environment.

Qpac® 40 Poly(Propylene Carbonate) is an amorphous, clear, readily processable solid polymer with long-term mechanical stability. The chemical formula is (C4H6O3)n.

PEROXAN EPC-60 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 60%, Emulsion in water and methanol.PEROXAN EPC-60 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Estercolors 013/3205 is a pigment preparation based on unsatured polyester resin.

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

Inhance Fluoro-Seal UH-1500 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

B-310 is impact block copolymer which has ethylene-propylene rubber inside homo polypropylene. This grade can be processed by sheet extrusion. B-310 shows good impact resistance at low temperature and has also high strength. It has good vacuum molding property, suitable for the production of vacuum molding goods. B-310 is applied to food packaging tray, various industrial sheets.

Blu Dot Asia CCF06PU is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

ACCR T-106 is a fine white powder. It is processed from white marble.

IRRH Speciality Chemicals Calcium Stearate ISC-100 is biodegradable and non-toxic.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Blu Dot Asia MCF80 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.