Products in Other Building & Construction Applications

Nayakem Butyl Stearate (BST) is used as plasticizers in nail varnishes, Emollient in skin cream, lotions & Lipsticks. Butyl Stearate is a fatty acid ester used as a raw material of emulsifiers or oiling agent for foods, spin finishes and textiles, lubricants for Plastics, Paint and ink Additives Surfactants and base material for perfumer. They are used as solvent or co-solvents, oil carriers in agriculture industries.

Polem A OF is a branched, castor oil-based polyol emulsion.

provides a cost-effective way to flame retard and smoke suppress plastics, rubber and other polymer systems. It is alumina trihydrate and has good flowability and wetout. H-TEC™ 1000 is used for flexible and rigid PVC, nitrile rubbers, neoprene, polyolefins, EPDM, SBR, EPR, latexes, urethanes, EVA copolymers, unsaturated polyesters and other polymer systems.

Sinobase Polymers Chemical AC-02 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

AH255 is a Coarse Ground ATH is used in Composites.

TCP is an additive flame retardant plasticizer used in flexible polyurethane foams, whose superiority is demonstrated in excellent hydrolysis stability, good electric insulation performance, superior mildew resistance and abrasion resistance. It can be recommended as flame retardant for synthetic rubber, PVC, polyester, polyolefin, and plasticizer or flame retardant plasticizer for vinyl resin, nitrocellulose, butyl rubber and chloroprene rubber.

ACCR T-115 is a fine white powder. It is processed from white marble.

PEROXAN CND-50 WN-A is Cumyl peroxyneodecanoate 50%, Emulsion in water in water and methanol.PEROXAN CND-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

CompaDur® 125 GF 30 (016) is a PBT / PET Blend, injection molding grade, 30% glass fibers, very good surface, high stiffness and strength.

Sinobase Polymers Chemical AC-04 is a slightly yellowish powder that is stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water and there is no toxicity or contamination..

Xtrabond 9500NC is a multi-purpose advanced polymer sealant. The product’s one component design ensures that it cures rapidly when exposed to atmospheric moisture to form a durable bond and can be applied in a wide range of temperature and weather conditions (-40° F to 140° F).

Microcare VDX Dry Lubricant Spray is a medical-grade Polytetrafluoroethylene (PTFE) micro dispersion lubricant. This spray-applied lubricant dispenses in a precise spray pattern ideal for spot lubrication of springs, hinges, and mechanical pinch points in medical device assemblies. VDX provides a low cost, non-migrating inert coating that imparts ultra-low friction surfaces and eliminates sticking problems common in low-speed, light-load mechanical assemblies.

BioFibra® BF-LHE01 are ideal for processing techniques such as injection, extrusion or thermoforming, and are suitable for applications in the fields of horticulture, packaging and more generally for technical parts for use unique.

NFC Sodium Sulfanilate – 34% Solution is a salt formation of Sulfanilic Acid (SNA). This form of the chemical is commonly used because of the increased solubility in water. SNA is widely used in the formation of optical brighteners for the paper industry, and also in the concrete, pharmaceutical and food dye industries. Sodium Sulfanilate Solution is available as a liquid solution in water.

Blu Dot Asia MCF100 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.

Estercolors 013/3402 is a pigment preparation based on unsatured polyester resin.

Dairen Chemical DA-179 has a excellent compatibility for cement application.

ZINC ALLOY 710 is copper hardened and titanium refined zinc. It has good strength and ductility with better creep resistance than most zinc alloys.

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

ACCR T-120 is a fine white powder. It is processed from white marble.

Micropol E28-05 is a random ethylene-vinyl acetate copolymer. This grade has been designed for cast / blown film applications where a high degree of flexibility is required combined with the physical cohesive strength properties which render it also suitable for hot-melt adhesive applications. Available in granular or powder form.

77 RED™ is a very high viscosity high strength threadlocker. It should be used on large fasteners, where a high break away torque is desired. Because it is high in viscosity, 77 RED™ will not run out of the joint before it cures and can be used in applications requiring good gap filling abilities.

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Johoku Chemical JPE-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

HercuLean HercuLean™ H140 19mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Neelanjana Polymers Beta Blue Pigments is Copper Phthalocyanine Blue with excellent dispersibility which finds widespread industry application.

Neelanjana Polymers Orange Pigments occurs between red and yellow in the visible spectrum. Expressed in the RGB color wheel, orange numerically positions almost in the middle of red and yellow in the gamma-compressed RGB color space. Belonging largely to the cadmium families, Orange pigments absorb blue light, which is the complementary color of Orange.

Iron oxide Black CI PB.11 780 is an important inorganic colorant, iron oxide yellow is characterized high opacity, strong tinting strength, easy dispersibility, excellent light fastness and perfect weather resistance. It is extensively used in concrete, roofing tile, paver, stucco, masonary, paint, coating, rubber, plastic, paper and leather industries etc.

Fine-Blend POE-g-MAH CMG5805 is a maleic anhydride grafted polymer. The base polymer is a polyolefin elastomer with high flexibility, and it has white or light yellow particle appearance.

US SPEC MP Grout is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. MP Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

Cling Foam® C800 Cling Foam offers a choice of materials depending upon the requirements of the application. The C800 Series is low density closed-cell Polyvinyl Chloride foam with the unique ability to bond to non-porous surfaces without an adhesive.It comes on a special "high gloss" paper to protect the cling surface. "Cling Foam " leaves no residue when removed. C810 is the same low density product; coated on the opposite laminating side with a pressure-sensitive adhesive.

PLASTOMER® 1090B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1090B/N is a fully crosslinked product and can be reused without scrap during processing.

ADK STAB 517 also called PDDP is applied in ABS, PVC, engineering plastics and contains features such as color improvement and high heat stability.

Rhino Linings USA, Inc. 3102 Hardener is a Fast 4:1 Laminating and Tooling Hardener.