Products in Other Infrastructure Applications

RECKLI PUR-Color pastes serve as tinting for RECKLI PUR Elastomers or colouration of particularly colorless (naturally colored) RECKLI PUR casting masses.

Biochar - Medium particle sizes ranges from 3mm to 26 mesh. It's applications include direct placement into soil, top-dressed on soil or grass and biofilter for air or water.

AQUAFIN® InjectProECO-SEAL is a water activated, flexible, hydrophilic polyurethane injection grout with high tensile and bonding strengths. InjectProECO-SEAL is designed for sealing leaking cracks or joints in below grade concrete structures with continuous moisture exposure. InjectProECO grouts are formulated with the newest phthalate free technology to be enviornmentally friendly and contain zero VOC’s.

Saint-Gobain Vetrotex America EC9 12 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

NEVPENE® 9511 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

Super NEVTAC®90 is a thermoplastic low molecular weight, aromatic modified C5 hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Procotex CF-120mm is a mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Basalt Fiber & Composite Materials Technology Development BCF reinforcing nets BFN-5 is used for reinforcing nets for construction.

Taishan Fiberglass EWR400, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

Basalt Fiber & Composite Materials Technology Development BFN-10 reinforcing nets is used for reinforcing nets for construction.

Only available in Asia! AGITAN P886 is a cost effective and economical powder defoamer specifically designed for broad use in most grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

Calcium Carbonate is a reinforced thermoplastics that offer excellent mechanical, physical and thermal properties. When selecting the material, stiffness, resistance to shock, scratches, chemicals and UV rays, along with easy processing are some of the factors to be considered. This highly-versatile class meets a wide range of requirements, thanks to a carefully selected base (polypropylene [PP], polystyrene [PS], polyethylene [PE] and others) and a reinforced filler of mineral (CaCO3, talc, mica) or other materials (glass fiber). The addition of two fillers of different nature allows us to create products with a unique set of properties such as dimensional stability, stiffness, and attractive textures and finishes. Filled between 5 and 50%, these thermoplastic compounds demonstrate very good mechanical, UV-resistant and color-controller properties – and are a very good value in terms of quality/price.

POLYSPORT STUCCO 950-Polyurethane pore filler is elastic solvent-free, two component polyurethane based sealant for indoor sport surfaces. It has very good filling capacity and thixothropic properties. It has low fluidity feature with its filler structure can be easily applied. It provides strong and elastic filling after the reaction.

Glass Fiber is a Reinforced thermoplastic products that offer excellent mechanical, physical and thermal properties. When selecting the material, stiffness, resistance to shock, scratches, chemicals and UV rays, along with easy processing are some of the factors to be considered. This highly-versatile class meets a wide range of requirements, thanks to a carefully selected base (polypropylene [PP], polystyrene [PS], polyethylene [PE] and others) and a reinforced filler of mineral (CaCO3, talc, mica) or other materials (glass fiber). The addition of two fillers of different nature allows us to create products with a unique set of properties such as dimensional stability, stiffness, and attractive textures and finishes. Filled between 5 and 50%, these thermoplastic compounds demonstrate very good mechanical, UV-resistant and color-controller properties – and are a very good value in terms of quality/price.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

Hempadur Avantguard 550 is an activated, zinc epoxy primer in compliance with the requirements of Level 3, type II in SSPC Paint- 20, 2019. Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.

Angeloni Group CBX-401 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

KoeppCell® K/PE 40 CN is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

GS® 5 Sealant is non-hardening butyl rubber based extruded sealant that forms an immediate bond between plastic, concrete, metal, and wood surfaces in both above and below ground applications.

METOLAT P 854 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application. The use of METOLAT P 854 significantly improves wetting of pigments and extenders.

KoeppCell® K/EV 45 is closed-cell having soft-elastic EV foam. It is chemically crosslinked polyethylene foam.

Hempadur 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

EF 12 is above 240 °C. High Tg EF12 resin system is used to produce structural prepregs. Optimized cure methods for these resin systems are Press and Autoclave molding.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Staple Fiber CD 11.5 2000 is a staple fiber, high tex yarns have a higher surface area that is ideal as a filtration medium for gas, dust and aerosols. Vetrotex manufactures a wide range of staple fibers ranging from 7 µm to 25 µm, perfect for use as filtration medium for mist elimination process.

Taishan Fiberglass ECW410(90), axial tape is produced by weaving looms, mainly used to increase axial strength of laminates and compatible with UP & VE resins.

OM 12 is a glass fiber or carbon fiber reinforced composites offer advantages of high corrosion resistance and high strength-to-weight ratio than traditional wood or steel materials. Kordsa may provide different reinforcement materials including glass or carbon UD, 2D and multiaxial impregnated with epoxy. For the huge size part production, generally vacuum bag only prepregs (OM12) are recommended

910 Assembled Roving for thermoplastic is coated with a silane-based sizing compatible with multiple resin systems such as PP, AS/ABS, especially reinforcing PA for good hydrolysis resistant. 910 is typically designed for twin-screw extrusion process to manufacture thermoplastic granules. Key applications include railway track fastening pieces, automotive parts, electrical & electronic applications.

Saint-Gobain Vetrotex America EC6 6 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

CM 15 is a Visual composites, Semi Structural and Fast Isothermally Press Curable, Class A Surface quality for painting, Hot Demoldable, Improved UV and environmental resistance, Improved fiber imprinting resistance

METOLAT® P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Polyumac Air-Cell T-150 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

KoeppCell® K/PE 35 FR is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.