Products in Building & Construction: Unsaturated Polyester (UPE)

ENYDYNE® H 66132 TAP - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

STYPOL® 040-8003 is a pre-promoted,flame-retardant polyester resin containing styrene monomer. It is especially formulated for production of reinforced plastic products using resin transfer molding (RTM). Certain applications with specific flame-retardant needs may require the addition of methyl methacrylate (MMA) and modest amounts of alumina trihydrate or antimony oxide/ammonium dimolybdate.

Norsodyne® 3318FR - non-promoted and non-wax. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Stypol® 040-4954 is clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble, onyx, and granite.

ENYDYNE® C 66100 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,continuous laminating method.

NORSODYNE® H 13135 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through hand lay up and spray up,casting method.

DISTITRON® 3501 CV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through casting method.

DISTITRON® 416 B1V12 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through centrifugal casting method.

NORSODYNE® Y 17185 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce mastics,putties.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.

DISTITRON® 1629 V2 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce reinforced plastics,general purpose through injection molding,rtm,press and vacuum molding method.

DISTITRON® 3559 FV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

Lerpol 3633 is a high quality OrthoPhtalic resin, RINA approved for boatbuilding. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.

Polipol 3455 is an orthophthalic based, low reactivity, medium viscosity, general purpose polyester resin. It is designed for artificial marble and casting applications.

HK Research R0231 is a resilient, light stabilized acrylic modified polyester casting resin.

Vikram Resins and Polymers VRP 2131 is a medium reactive Isophthalic Acid based Unsaturated Polyester Resin. It has better mechanical, corrosion, and electrical properties as compared to Orthophthalic Polyesters, has high water resistance and good wetting, and is fast curing. VRP 2131 is suitable for hand lay-up, RTM, pultrusion, filament winding, and other molding techniques and can be used for the manufacture of marine products, tanks, pipes, automobile parts, gratings etc. Also, it can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Olive TQ-10s Non-styrene polyester chemical tack is a two-component high strength 10:1 ratio chemical anchoring resin system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations. It is designed as a fast curing high strength resin fixing anchor for medium loads in both horizontal and vertical applications.

Polynt Group 777-8685 is general purpose RTM and infusion for slower cure rate and good profile. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 459 AV4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets.

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

Norsodyne® O-100 - isophthalic resin for iso onyx marble, good transparent. Main applications areas are home and domestic applications etc.

Norsodyne® BK-505 - high viscosity, good transparency, thick button. Main applications areas are leisure and clothing etc.

HK Research R0229 resilient, acrylic modified isophthalic casting resin was developed specifically for use with 2,4 Pentanedione Peroxides to offer a faster curing and demolding system for densified casting manufacturers. The use of this special catalyst with the R0229 resin will give the molder castings that will approximate the cure of the BPO-cured resin systems without the amber color usually associated with the BPO-cured systems. White and light pastel-colored castings of R0229 using 2,4 Pentanedione Peroxide do have a slightly green color due to the decomposition products of the catalyst. This green cast is not readily evident in darker solid colors or dark granite castings.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Aekyung Chemical CW-200 is a DCPD modified UPR.

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

NORSODYNE® S 81302 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

DISTITRON® 114 C - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through continuous laminating method.

Polydyne® 6010 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 412 RV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

ENYDYNE® I 66319 A - Unsaturated polyester resin in styrene,DCPD. It is used in injection molding,rtm method.

Norsodyne® BR-270HV - multicolor application, high viscosity, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.