Products in Infrastructure, Roads & Paving: Unsaturated Polyester (...

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

DISTITRON® 5119 DSX21ZQ - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Norsodyne® G-160HV is used for general purpose coatings applicatons.

Norsodyne® 3338LSE is general purpose laminating resin with low styrene emission, good water resistance, promoted and non-waxed and it is generally used in automotive, building and construction, industrial sector, marine applicatons.

ENYDYNE® T 67665 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Stypol® RLPH1410 - low color orthophthalic DCPD blend RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polydyne® 6023 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

ENYDYNE® H 66126 TAE - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

DISTITRON® 506 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

EASYLAM® LSE - Unsaturated polyester resin in styrene,special. It is used as general purpose in hand lay up and spray up method.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

EPOVIA RF-2050SE is Chlorendic anhydride (HET acid) based unsaturated polyester resin. Main Applications areas are Building and Construction,Chemical Industry,Industrial sector etc.

NORSODYNE® H 13212 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

Norsodyne® 3600BNP - high filler loading, non-promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® CMI15100W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.