Products in Pools & Landscaping

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Prismagum-G Red A682 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Yellow A688 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Yellow A687 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion. The product is also available in slab form and can be dispersed in different polymer types. Please contact us for more information

Catalina Chemical Magic is a deep penetrating, siloxane water repellant which provides a virtually invisible below surface seal. This sealer is vapor permeable and does not form a surface film. It internally seals and waterproofs the substrate which allows moisture to breathe out of the stone, while preventing moisture and dirt from penetrating the surface. This will not alter the appearance of the stone. Magic preserves original beauty of the surface, inhibits efflorescence, penetrates deeply and immediately, and is an excellent grout release. Use when a natural look is desired. For interior or exterior use.

Prismagum-G Blue J678 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Black C644 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Orange A686 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

THPP80-FN is a Polypropylene (PP) honeycomb cores which are a strong but flexible lightweight material that provides optimal mechanical performance in composite sandwich structures.

Prismagum-G Red J636 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Red S220 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Alabama Pigments Company Medium Gray Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

Ardex X 32™ ​Microtec® is a rapid-setting, Portland cement-based, polymer-modified mortar with MICROTEC® and self-drying technologies, ARDEX X 32™ MICROTEC® Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar is ideal for moisture-sensitive natural stone, marble and granite installations. It will not contribute to staining, discoloration or warping of natural stone tiles. ARDEX X 32 can be used as a thin to thick bed up to 1 1/4” (31.8 mm) thick and is excellent for use with agglomerate and ungauged stones that require various mortar depths. Even at a 1 1/4” (31.8 mm) thickness, ARDEX X 32 is ready for grout in just 3 hours, making it ideal for same day interior or exterior fast track installations. ARDEX X 32 can be used over exterior concrete and masonry surfaces and over common interior substrates, including concrete, masonry and exterior-grade plywood.

Marvel Industrial ProtecT2 is a solvent-based clear topcoat that bonds well on top of our Marvel Hybrid & 100% Polyureas to provide protection against harsh environments. Demonstrating excellent abrasion, scratch, and UV resistance, our Marvel ProtecT2 is the perfect compliment for added protection.

Alabama Pigments Company Sun Buff Class Ii is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

Featherlite® FL-50 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 50% weight reduction and 47% resin demand.

Lerpol Cristal 025 is a clear casting resin. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Lerpol R 813 VEFR is Vinylester flame retardant resins, preaccelerated, unfilled. In combination with Lavecoat FT, this resin enables the manufacturing of parts compliant with norm EN 45545, requirements R1 and R17.

Ilkalem AS IR-100T is ISO thixotropic unsaturated polyester resin for GRP applications.

E Glass fabrics 2120 is a balanced plain weave fabric.

ROTEC® AES A 707 is AES, extrusion and injection molding grade, high-impact.

Lerpol 383 is a DCPD resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

SIMONA® PE 100 black 10024795 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

E-glass fiber 1080 is a balanced plain weave fabric.

Aekyung Chemical SLO-180NT is an ortho type UPR.

Abdullah Al Barrak Plastic Products Polycarbonate Textured Sheet 1000 x 2000 has a texture or pattern which is embossed on its surfaces. By the texture diffuses the natural light, which streams in and ensures uniform dispersion of light over a large scale area that can prevent glare. It is more used mainly in the partition with beautiful decoration effects. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Admix C-1000/C-1000 NF is added to the concrete mix at the time of batching. Admix C-1000/C-1000 NF consists of Portland cement, silica sand (excluding the NF grade) and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the byproducts of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

600 P.M. Sanded Grout is a premium smooth spreading cement-based grout containing graded aggregates, colorfast pigments, and select polymer additives to provide superior flexural and compressive strengths. It cures to provide a dense, hard, wear resistant joint, containing FlexfreshTM for mold and mildew resistance

E Glass fabrics 1610 is a balanced plain weave fabric.

Lerpol 653 is a orthophtalic resin for casting. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Nidaplast EP-S 400 is a easy to transport and use, it allows simple installation and rapid loss of soaks, drainage trenches, etc.

PPA 21 is a polymer processing aid with PE Resin. It is used in building, construction & landscaping ,consumer goods ,healthcare ,packaging.

Lerpol 302 is a ISO-NPG high performance resin. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

ClariShield® Solvent-Based Natural Look Clear Sealer provides a low-sheen finish that adds depth of color and enhances the appearance of concrete and pavers.

Lerpol 385 is a DCPD filled resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.