Products in Agriculture & Feed: Polyethylenes

Grade 15313-003 is intended for manufacture of thin films and film products, shrinkable films, films for food contact (including air - tight packing), general purpose films, bags and packages. To be used for covering the articles allowed for food contact, for manufacture of pipes and fittings allowed for cold domestic water supply.

Evalene® HP06491 is a High Density Polyethylene grades exhibit superior balance of stiffness, impact strength and chemical resistance, making them ideal for a broad range of applications such as extrusion (blown film, pipe and monofilament) as well as injection, compression and blow molding of consumer, household and industrial products.

Epsotech PE HA1 NC is a single layer high density Polyethylene product. It is specially formulated and manufactured for fabrication applications.

• One of the BioBlend® XP family of high performance BioPolymers designed for blown film applications.• BioBlend® XP 24250 is a masterbatch that contains 50% NuPlastiQ GP BioPolymer compounded with metallocene LLDPE.• Made from 50% annually renewable agricultural resources.• Supplied in pellet form.

ADVANCENE™ EE-1802-AAB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-AAB resin have very good tensile and toughness properties.

Poliplast RCM1111 is a specially developed to obtain particular properties. These products are developed for use in specific applications.

LINATHENE® LL120C is a linear low density polyethylene resin (LLDPE) for use in cast film extrusion.

2MILA 273 - 83 is intended to manufacture of industrial-use articles by means of extrusion an extrusion blow molding (e.g. tanks, cans with a capacity of 5-20 l, intermediate bulk containers with a capacity of up to 200 liters), of cultural - and household-use articles including articles in contact with food. It can be used for manufacture of pipes and fittings, as well as for manufacture of various toys.

Metiplen 002 HDPE Black has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

Grade 10803-020 is intended for manufacture of films and film products for general purpose (industrial films forgreen house covering and other agricultural needs), films for food contact (including air-tight packing), bags, packages; allowed for food contact, for manufacture of toys and articles approved for packing and sealing of medicines.

Lotrène® FE 3000 is an additive free grade produced by a tubular high pressure process mainly recommended for heavy duty film applications,.

LDPE 25x2.3 is a pipe color black, 4x green longitudinal stripes. These pipes are very flexible and bendable.

MLPlastics Additive Masterbatches PE ML1803 is a additive masterbatch containing effective substance in PE carrier resin. Acts as a dessicant. The active substance absorbs the moisture and binds it chemically. This chemical process is irreversible at temperatures normally applied in plastics processing. Developed for the absorption of moisture when extruded with recycling materials as well as for applications which are sensitive to moisture. Can be used during extrusion/molding of all kinds of plastics.

HDPE granules extrusion

MLPlastics Additive Masterbatches PE STA1905 is a additive masterbatch containing a high purity short-term antistatic agent of vegetable origin in PE carrier resin. It migrates very fast to the surface of the plastic articles and offers almost instantaneous antistatic performance.

LDPE 63x5,, 8 is a pipe color black, 4x green longitudinal stripes. These pipes are very flexible and bendable.

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Osterman & Company Inc. Osterlene® HD030-AS is a blow molding grade high density polyethylene copolymer containging and antistat additive. It provides a good balance of stiffnes and stress-crack resistance.Applications for HD030-AS include drainage pipes, food packaging, household and industrial chemical containers, pharmaceutical packaging, thermoformed parts, and thin gage sheet.This product contains antistatic and thermal stabilizer.

Isoplas P501 is used for hot and cold sanitary water pipes.

HF-5007 delivers in granules, white and is a hexene copolymer have low odor.

SIMONA® PE 100 black 10024800 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Golden Compound HDPE 4341 DOM H4 green characterize the ready-to-use solutions based on the fibers of sunflower seed hulls, that have been developed for many applications and markets. In addition, all materials for injection molding, which require good processability, density and impact resistance, have been optimized.

HS-5407 V1 delivers in granules, white and is a hexene copolymer have low odor.

Alfaten® LDPE 120 is a low Density Polyethylene regenerated.

OpaLene LL F2001A is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

Microlin ML54 is a rotational molding powder based on a specially developed easy flow linear polyethylene formulation designed to produce moldings of good rigidity combined with excellent impact resistance & environmental stress crack resistance.

MF-2606 delivers in granules, white and is a a mixtures of polymer materials, heat sealable, low odor.

Metiplen 002 HDPE White has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

Zibo Fengyi Plastics CPE 135B Elastic of Chlorinated Polyethylene is a kind of irregular structure thermo elastomer without any crystals. It has the characteristic of low plastic temperature, low ML viscosity, fine machining function, fine resistance at low temperature, fine heat resistance, fine deflection, fine fire-resistance, it can be mixed with CR, CSM, NBR, EPDM AND SBR at any proportion.

Osterman & Company Inc. Osterlene® HB1049 is an extra high molecular weight hexene copolymer. It has good melt strength, good rigidity, excellent stress crack resistance and excellent impact strength even at low temperatures.HB1049 is excellent for large part molding applications.Recommended applications for HB1049 include blow molding large shipping containers, agricultural chemical tanks and gasoline tanks. Extruded applications would include pallets, cattle feeders, large formed parts and boats.Osterlene HB1049 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Recyklon HDPE Regranulate Color (Black) is made from a high-quality post-production batch, which ensures consistent parameters such as MFI and impact strength. We average individual batches of regranulate to ensure consistent production. Deviations from the black color and granule shape are carefully monitored. Production is planned in collaboration with the client in order to tailor the raw material parameters to the application.

Daelim Po1y® XP9400 is a Commercialized for the first time in Korea by applying proprietary metallocene catalyst technology Excellent mechanical and optical properties compared to general LLDPE. Application of proprietary metallocene catalyst technology.

InnoPlastics AG P-Nr. 1841 - InnoPE-LD colored is a type of LDPE Regranulate for Sheets.

InnoPlastics AG P-Nr. 2000 - InnoPE-HD black is a type of HDPE Regranulate.

Asrene® UF 1820S1 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UF 1820S1 include bags/liners, film and agricultural.Characteristics include: Antiblock Butene Comonomer Food Contact Acceptable Good Processability Slip

KWR 102-8812 BLK is a Copolymer, high Density Polyethylene Post-Consumer Resin, pre-colored black.