Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
• Agricultural Film.
• Bag in Box.
• Cast Film.
• Blown Film.
• Bread Bags.
• Food Packaging.
• Form Fill and Seal Packaging.
• Freezer Film• Garment Film
• General Packaging.
• Industrial Packaging.
• Institutional Can Liners.
• Lamination Film.
• Liners.
• Mulch Films.
• Multilayer Packaging Film.
• Packaging Films.
• Personal Care.
• Produce Bags on a Roll.
• Shoppers.
• Trash Can Liners.
Properties
- Physical Properties
Value Units Test Method / Conditions Density 0.918 g/cm3 ASTM D792 Melt Index (190ºC/2.16kg) 2 g/10min ASTM D1238. ISO 1133 Peak Melting Temperature 121 ºC ASTM D3418. ISO 3146 - Film Properties
Value Units Test Method / Conditions Tensile Strength at Yield MD 11 Mpa ASTM D882 Tensile Strength at Yield TD 10 Mpa ASTM D882 Tensile Strength at Break MD 49 Mpa ASTM D882 Tensile Strength at Break TD 29 Mpa ASTM D882 Elongation at Break MD 600 % ASTM D882 Elongation at Break TD 800 % ASTM D882 Secant Modulus MD - 1% Secant 190 MPa ASTM D882 Secant Modulus TD - 1% Secant 220 MPa ASTM D882 Dart Drop Impact 66 g ASTM D1709A, ISO 7765 Elmendorf Tear Strength MD 85 g ASTM D1922, ISO 6383-2 Elmendorf Tear Strength TD 400 g ASTM D1922, ISO 6383-2 - Optical Properties
Value Units Test Method / Conditions Gloss (45º) 76 - ASTM D2457 Haze 4.4 % ASTM D1003
Regulatory & Compliance
- Certifications & Compliance
- Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
Technical Details & Test Data
- Processing Statement
The film properties have measured on 25.4 pm (1 .O mil) thick film (screw diameter = 75 mm, die gap =2.5 mm, BUR = 2.5 and temperature setting of 2WC).
Optical film properties have been measured on a 25.4 pm thick film (without antiblock) with addition of 10% LDPE at the same conditions.
Safety & Health
- Safety
The product is not classified as a hazardous mixture.Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed.
Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of fumes are generated during of the product. Proper ventilation is therefore required.
Packaging & Availability
- Packaging Type
- Regional Availability
- Availability
This prcxiuct is supplied in 25 kg bags in secured pallets of 60 bags (1.500 MT net). It is also supplied in jumbo bags of 1000 kg capacity.
Storage & Handling
- Storage
The product should be stored in dry conditions at temperatures below 500C and protected from UV-light. Improper storage can initiate degradation, which results in generation and color changes and can have negative effects on the physical of this product.