Products in Adhesives & Sealants: Silicones

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

Wacker Chemie Crosslinker BO 30 is a mixture consisting of various ketoximosilanes. It is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms methylethylketoxime. This crosslinker is primarily used as a special raw material for silicone compounding applications.

WACKER® Polymer FD 350 is a hydroxyfunctional polydimethylsiloxane polymer. It is a colorless, clear, and odorless liquid that is not miscible with water. It is recommended for use in a variety of processing and formulating applications such as sealants, adhesives, coatings, softeners (textile), and mold-making products.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

WACKER® Polymer FD 6 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product is specifically designed for use in sealants and silicone sealants, serving as a special raw material for silicone compounding.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

SILRES® REN 50 is a medium-hard methyl phenyl silicone resin available as a 50 wt.% solution in xylene-butanol (9:1). It is primarily employed as a binder for heat-resistant, anticorrosive coatings. Additionally, SILRES® REN 50 finds extensive use as a binder in various coating applications. It offers exceptional heat resistance and weatherability, ensuring optimal performance in demanding environments. Furthermore, it exhibits fast drying characteristics, forming a tack-free film at ambient temperature.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

WACKER® Polymer FD 80 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product is specifically designed for use in sealants and silicone sealants, serving as a special raw material for silicone compounding.

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

Wacker Chemie Crosslinker BO 35 is a colorless to yellow liquid composed of tris(ethylmethylketoximato)vinylsilane. It is not miscible with water and decomposes when exposed to water or moisture, forming methylethylketoxime. This crosslinker is specifically used as a raw material in the production of oxime-cured RTV-1-silicone rubber compounds.

Wacker Chemie Crosslinker BO 32 is composed of tetraoximinosilane in toluene. It is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms methylethylketoxime. This crosslinker is primarily used as a special raw material for compounding silicone sealants.

ELASTOSIL® E41 Transparent is a flowable, one-component silicone rubber with excellent mechanical properties that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates, in particular cured silicone rubber.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

Wacker Chemie Crosslinker BO 38 is a colorless to yellow liquid that consists of tris(ethylmethylketoximato)methylsilane. It is not miscible with water and undergoes decomposition in the presence of water or moisture, resulting in the formation of methylethylketoxime. This particular crosslinker is utilized as a special raw material for compounding silicone sealants.

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.

WACKER® Polymer FD 50 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product serves as a special raw material for silicone compounding, particularly in the production of sealants and silicone sealants.

WACKER® Plasticizer 100 is a colorless, clear, and odorless liquid with a density of approximately 0.96 g/cm³ at 25°C. It is not soluble in water. This product is commonly used in silicone sealants. WACKER® Plasticizer 100 serves as a raw material for the production of RTV-1-silicone rubbers.

WACKER® Polymer FD 20 is a colorless, clear, and odorless liquid that is not miscible with water. It is utilized as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and finds applications in the production of sealants and silicone sealants.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

TEGO® Antifoam 1435 is a silicone oil-based defoamer emulsion featuring non-ionic emulsifiers. This product serves as a ready-to-use antifoam solution, ideal for post-defoaming in surfactant-based systems, as well as in applications like printing pastes and non-woven production. TEGO® Antifoam 1435 excels as a silicone oil-free antifoam, efficiently controlling foam with minimal usage, ensuring process effectiveness.

TEGO® Antifoam 50 is a highly efficient silicone-based antifoam emulsion that can be easily diluted with water. It serves as an anti-foaming agent and is suitable for managing foam in a range of industrial applications. Classified under industrial additives, this product falls within the category of processing aids, specifically as an other processing additive, and belongs to the silicone chemical family.

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.