Products

MOCOM Compounds ALFATER® XL A70I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It is suitable for a variety of market segments such as automotive, building and construction, electrical and electronic, sport and leisure, and furniture. Typical applications of this product include seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, casters, and 2K components. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber. Additionally, it has a service temperature range of -40-125°C.

MOCOM Compounds TEDUR® L 9200-1 is a base polymer of Polyphenylene Sulfide that has a filler/additive system of 60% glass fiber/mineral and is known for its high toughness. It is typically used for automotive seals and various applications. For pre-drying, it should be dried in a dry air (dessiccant) dryer for 2-4 hours at 130-140°C, depending on moisture content. For injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

MOCOM Compounds ALCOM® PP 620/1 WT1433-05LB is a polypropylene homopolymer with 8% special filler, 30% mineral, and highly reflective, opaque features. It is used in the automotive and lighting market segments for light guides, reflectors, and light blocking components. The processing for injection molding is done at a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALTECH® PP-B B 4430/500 MR30 is a polypropylene copolymer suitable for injection molding. It includes a 30% mineral filler/additive system, providing easy release (demolding) and processing stability. This product is suitable for automotive, building and construction applications, such as housing and automotive trim unpainted, buffer, and functional components. For optimal performance, it should be stored in a dry and light-protected area at temperatures not exceeding 30°C.

MOCOM Compounds TEDUR® L 9116-1 is a base polymer of Polyphenylene Sulfide filled with 60% glass fibers. It has pre-drying conditions of 130-140°C for 2-4 hours in a dry air (dessiccant) dryer and is processed through injection molding with a melt temperature of 320-340°C and a mold temperature above 140°C. It has low warpage, high toughness, and high stiffness and is used in automotive and machinery applications for injection molded parts.

MOCOM Compounds ALTECH® PP-H B 4030/507 TV30 is a Polypropylene Homopolymer with a mineral filler/additive system that is UV stabilized, has easy release (demolding), processing stabilized, and heat stabilized properties. It is suitable for use in the Automotive market segment and is ideal for applications such as fixtures/fittings, exterior injection molded parts, and interior decoration/finishing. Typical applications include functional components, fixing elements, clothing/fasteners, and housings.

MOCOM Compounds ALCOM® AWL 109/10 GF20 WT1142-12LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer, modified with polycarbonate and a Filler/Additive System of special filler, 20 % glass fibers. It features high reflectivity, opacity, heat stability, and stiffness, making it suitable for use in the Automotive and Lighting Market Segments for applications such as lighting, light blocking components, and light guides and reflectors. Processing Injection molding is done with a melt temperature of 240-270°C and a mold temperature of 60-100°C.

MOCOM Compounds ALFATER® XL A70I 4PA0010 is a thermoplastic vulcanisate (PP+EPDM) which is available in natural, bright inherent colors and black. It has adhesion-modified properties to polyamide, as well as easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. The black color also passes weathering dry and hot (Kalahari, PV3929) as well as weathering moist and hot (Florida, PV3930). Its typical application areas include automotive, building and construction, electrical and electronic, machinery, and furniture, and it is used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, functional components, casters, and 2K components.

MOCOM Compounds ALCOM® AWL 15/1 UV WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of 15% special filler. It is highly reflective, opaque, and UV stabilized, used in the automotive and lighting markets for applications such as light guides and reflectors. Processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. This product should be stored in a dry, light-protected environment.

MOCOM Compounds ALFATER® XL A90I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding applications. It comes in natural color, bright inherent color, and black and has low emission, good colorability, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air and hydrolysis resistance. It can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and casters and has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-H A 4920/107 MR20 is a polypropylene homopolymer that is processing stabilized, easy to release (demolding), heat stabilized, and is typically used for functional components, housings, injection molded parts, interior decoration/finishing, clothing/fasteners in the automotive, electrical, and electronic market segments.

MOCOM Compounds ALTECH® PP-B A 4920/100 MR20 is a Polypropylene Heterophasic Copolymer with a 20% talcum filler/additive system that is heat stabilized, easy to release (demolding) and processing stabilized. It is suitable for Automotive, building and construction, electrical, and electronic applications, including interior decoration/finishing, gardening tools, exterior parts, and electrical components. Typical applications include housings, functional components, and fixing elements. Pre-drying conditions should be in an air-circulating dryer 80-120°C for 2-4 hours or in a dry air (desiccant) dryer 80-120°C for 2-3 hours. For best results, processing injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALFATER® XL A65E 2GP0000 WT1159-17 is a thermoplastic vulcanisate (PP+EPDM) available in natural, white, and black colors. It has high viscosity and superior resistance to weathering, chemicals, ozone, hot air, and hydrolysis. This material is widely used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for applications such as profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, and air ducts, as well as 2K components. It offers excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® PBT/ASA 715/1 GF15 TF6 UV WT1287-09LB is a material composed of a base polymer of Polybutylene Terephthalate + Acrylonitrile Styrene Acrylate, a filler/additive system of 15% glass fibers and 6% PTFE, and special features of high reflectivity, opacity, and high stiffness, with UV stabilization. It is developed for the automotive and lighting industries and is suitable for light guides, reflectors, and light blocking components.

MOCOM Compounds ALCOM® AWL 109/15 WT1217-11LB is a highly reflective, opaque, and high heat stabilized Acrylonitrile/Butadiene/Styrene/Copolymer modified with polycarbonate and 15% special filler. It is used in automotive, various lighting, and light blocking components and its typical applications are light guides and reflectors. It is approved by GMW15702 and should be processed with a melt temperature of 230-270°C and a mold temperature of 60-100°C.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds TEDUR® L 9560 S is a Polyphenylene Sulfide injection molding grade with 50% mineral filler/additive system. It has improved surface appearance, high surface gloss, and is metallizable. Pre-drying conditions include drying in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content at 130-140°C. Processing injection molding requires a melt temperature between 320-340°C and a mold temperature above 140°C. Typical applications include reflectors for automotive, lighting and consumer products.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALFATER® XL A75I 4GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material that features low emission, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It can be used in injection molding, with melt temperatures between 190-220°C, mold temperatures of 10-60°C, injection speed of middle to high, and back pressure of greater than 3 bar. It is suitable for use in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications, such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, 2K components, and casters. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber, and has a service temperature range of -40-125°C.

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 4920/508 MR20 is a Polypropylene Homopolymer with a filler/additive system of talcum that has special features of being detectable, processing stabilized, easy release (demolding), and heat stabilized. It is mainly used in the building and construction and automotive market segments for applications such as injection molded parts, interior decoration/finishing, and functional components and housings. For optimal performance, this material should be stored in dark places and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PP-H A 4930/506 MR30 is a polypropylene homopolymer with a filler/additive system of 30% talcum and is heat-stabilized, and includes a slip agent for easy release (demolding). It is suitable for electrical and electronic parts, as well as injection molded parts. The processing of injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALFATER® XL A55I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer with temperatures of 70-80°C for 2-4 hours with a maximum moisture content of <0.10%. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used mainly in the injection molding process with melt temperatures of 195-230°C, mold temperatures of 10-60°C, high injection speed, and back pressure (hydraulic) >5 bar and holding pressure 50-70% of injection pressure. It is used in automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners, and connectors, 2K components.

MOCOM Compounds ALTECH® PP-H A 4818/100 MR18 is a Polypropylene Homopolymer with a Filler/Additive System of chalk, which features detergent solution stabilization, processing stabilization, and easy release (demolding). Processing Injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for building and construction applications and is often used in domestic appliances, housings, and functional components.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A60I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) of natural color, bright inherent color, and blue. Its pre-drying conditions include a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of less than 0.10%. Special features of the polymer include being food contact compliant with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the packaging, household goods, food processing industry, toys, and other areas for injection molded parts, such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, and kitchenware. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A80I 2FE0002 is a thermoplastic vulcanisate (PP+EPDM), black in color, with a high density and noise dampening properties. It is suitable for injection molding, with a melt temperature of 195-230°C and mold temperature of 10-70°C. It has good weathering resistance, is resistant to alkalis, has good ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for applications in the automotive, machinery, building and construction, and electrical and electronic sectors, and has a service temperature range of -40-125°C. For optimal performance, it should be stored dry, protected from light, and tightly sealed, preferably at temperatures not exceeding 30°C.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.

MOCOM Compounds TEDUR® L 9912-1 is a polyphenylene sulfide filled with 60% glass fiber/mineral, used for the injection molding of high-density parts for the automotive and machinery market. The pre-drying conditions require a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours, depending on the moisture content. For injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C. Typical applications are varied, and it should be stored in a dark place, and not at a temperature above 30°C.

MOCOM Compounds ALCOM® PP 620/1 WT1034-05LB is a base polymer of Polypropylene Homopolymer with a filler/additive system of 15% special filler and 15% mineral. It is highly reflective and opaque, making it suitable for applications such as light guides and reflectors, and is used in the automotive and lighting market segment. The pre-drying conditions involve being in a dry air (dessiccant) dryer or air circulating dryer set between 80-100°C for 2-4 hours with a maximum moisture content of <0.02%. The processing injection molding requires a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds Alcom® PWL 10/1 WT 41-913LB is an impact-modified polycarbonate designed for use in automotive and lighting applications. It contains 15% special filler that gives it a highly reflective, opaque appearance, making it ideal for light blocking components. It should be stored in a dry area and protected from light.