Products

MOCOM Compounds TEDUR® L 9107-1 is an injection molding grade of Polyphenylene Sulfide base polymer with 40% glass fibers filler/additive system. The melt temperature should be 320-340°C and the mold temperature should be greater than 140°C. It has special features such as high toughness, reduced flash, and increased burst strength. Typical applications include pump components such as pump impellers. For optimal performance, it should be stored dry and protected from light at temperatures not exceeding 30°C.

MOCOM Compounds TEDUR® L 9107-1 S is a polyphenylene sulfide polymer containing 40% glass fibers designed for injection molding applications. It offers high toughness and reduced flash, with increased burst strength, making it suitable for the machinery market segment. Typical applications include pump impellers. The pre-drying conditions require the material to be placed in a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours, depending on moisture content. For injection molding, a melt temperature of 320-340°C and mold temperature of greater than 140°C is required.

MOCOM Compounds TEDUR® L 9107-1 U is a polyphenylene sulfide-based injection molding grade with 40% glass fibers as a filler/additive system. It has high toughness, reduced flash, and increased burst strength, making it suitable for pump components such as pump impellers. The addition of 40% glass fiber gives TEDUR® L 9107-1 U increased burst strength and high toughness, making it ideal for pump components in demanding environments.

MOCOM Compounds TEDUR® L 9107-7 is a polyphenylene sulfide injection molding grade with 40% glass fibers, featuring high toughness, reduced flash, increased burst strength, low odor, and is suitable for automotive, machinery, and various applications, such as pump components, housings, pump impellers, and high pressure vessels. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C.

MOCOM Compounds TEDUR® L 9113-2 is a Polyphenylene Sulfide injection molding grade with a filler/additive system of 60% glass fibers. It has a high stiffness and is suitable for use in the Automotive and Machinery markets. Pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing Injection molding should be done with a melt temperature of 320-340°C and a mold temperature greater than 140°C. It is recommended to protect from light and store at a temperature not exceeding 30°C.

MOCOM Compounds TEDUR® L 9114-1 S is a base polymer of Polyphenylene Sulfide containing 60% glass fibers, offering high stiffness and injection molding grade. It is suitable for various applications and should be stored in a dry, light-protected environment not exceeding 30°C. During processing injection molding, melt temperature should be 320-340°C and mold temperature should be greater than 140°C. Ensure that the temperature is not exceeded, otherwise the material may degrade.

MOCOM Compounds TEDUR® L 9116-1 is a base polymer of Polyphenylene Sulfide filled with 60% glass fibers. It has pre-drying conditions of 130-140°C for 2-4 hours in a dry air (dessiccant) dryer and is processed through injection molding with a melt temperature of 320-340°C and a mold temperature above 140°C. It has low warpage, high toughness, and high stiffness and is used in automotive and machinery applications for injection molded parts.

MOCOM Compounds TEDUR® L 9200-1 is a base polymer of Polyphenylene Sulfide that has a filler/additive system of 60% glass fiber/mineral and is known for its high toughness. It is typically used for automotive seals and various applications. For pre-drying, it should be dried in a dry air (dessiccant) dryer for 2-4 hours at 130-140°C, depending on moisture content. For injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

MOCOM Compounds TEDUR® L 9200-1 U is a polyphenylene sulfide base polymer with a filler/additive system of 60% glass fiber/mineral. It is designed for pre-drying conditions in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. It offers high toughness, high stiffness, low warpage, and low anisotropic shrinkage, making it suitable for use in the automotive and various market segments. It is typically used for applications such as seals.

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds TEDUR® L 9217-1 is a Polyphenylene Sulfide base polymer filled with 65% glass fiber/mineral. It has high stiffness, hot oil resistance, and good hydrolysis resistance, making it ideal for highly stressed parts in the automotive, machinery, and lighting market segments. Pre-drying Conditions require a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. Injection molding requires a melt temperature of 320-340°C and a mold temperature of >140°C.

MOCOM Compounds TEDUR® L 9105-1 is a Polyphenylene Sulfide base polymer with 30% glass fiber filler/additive system. It is designed for automotive and machinery applications and is known for its high toughness and stiffness. During processing with injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C.