TEDUR

MOCOM Compounds Brand

Products:44

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:13500.0 - 13500.0 MPa

MOCOM Compounds TEDUR® L 9107-1 is an injection molding grade of Polyphenylene Sulfide base polymer with 40% glass fibers filler/additive system. The melt temperature should be 320-340°C and the mold temperature should be greater than 140°C. It has special features such as high toughness, reduced flash, and increased burst strength. Typical applications include pump components such as pump impellers. For optimal performance, it should be stored dry and protected from light at temperatures not exceeding 30°C.

TEDUR® L 9107-1 S

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:14000.0 - 14000.0 MPa

MOCOM Compounds TEDUR® L 9107-1 S is a polyphenylene sulfide polymer containing 40% glass fibers designed for injection molding applications. It offers high toughness and reduced flash, with increased burst strength, making it suitable for the machinery market segment. Typical applications include pump impellers. The pre-drying conditions require the material to be placed in a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours, depending on moisture content. For injection molding, a melt temperature of 320-340°C and mold temperature of greater than 140°C is required.

TEDUR® L 9107-1 U

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:14000.0 - 14000.0 MPa

MOCOM Compounds TEDUR® L 9107-1 U is a polyphenylene sulfide-based injection molding grade with 40% glass fibers as a filler/additive system. It has high toughness, reduced flash, and increased burst strength, making it suitable for pump components such as pump impellers. The addition of 40% glass fiber gives TEDUR® L 9107-1 U increased burst strength and high toughness, making it ideal for pump components in demanding environments.

TEDUR® L 9107-7

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:14500.0 - 14500.0 MPa

MOCOM Compounds TEDUR® L 9107-7 is a polyphenylene sulfide injection molding grade with 40% glass fibers, featuring high toughness, reduced flash, increased burst strength, low odor, and is suitable for automotive, machinery, and various applications, such as pump components, housings, pump impellers, and high pressure vessels. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C.

TEDUR® L 9113-2

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:22600.0 - 22600.0 MPa

MOCOM Compounds TEDUR® L 9113-2 is a Polyphenylene Sulfide injection molding grade with a filler/additive system of 60% glass fibers. It has a high stiffness and is suitable for use in the Automotive and Machinery markets. Pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing Injection molding should be done with a melt temperature of 320-340°C and a mold temperature greater than 140°C. It is recommended to protect from light and store at a temperature not exceeding 30°C.

TEDUR® L 9114-1 S

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:23000.0 - 23000.0 MPa

MOCOM Compounds TEDUR® L 9114-1 S is a base polymer of Polyphenylene Sulfide containing 60% glass fibers, offering high stiffness and injection molding grade. It is suitable for various applications and should be stored in a dry, light-protected environment not exceeding 30°C. During processing injection molding, melt temperature should be 320-340°C and mold temperature should be greater than 140°C. Ensure that the temperature is not exceeded, otherwise the material may degrade.

TEDUR® L 9116-1

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Mineral, Glass Fiber
Flexural Modulus:20000.0 - 20000.0 MPa

MOCOM Compounds TEDUR® L 9116-1 is a base polymer of Polyphenylene Sulfide filled with 60% glass fibers. It has pre-drying conditions of 130-140°C for 2-4 hours in a dry air (dessiccant) dryer and is processed through injection molding with a melt temperature of 320-340°C and a mold temperature above 140°C. It has low warpage, high toughness, and high stiffness and is used in automotive and machinery applications for injection molded parts.

TEDUR® L 9200-1

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass/Mineral, Mineral
Flexural Modulus:17000.0 - 17000.0 MPa

MOCOM Compounds TEDUR® L 9200-1 is a base polymer of Polyphenylene Sulfide that has a filler/additive system of 60% glass fiber/mineral and is known for its high toughness. It is typically used for automotive seals and various applications. For pre-drying, it should be dried in a dry air (dessiccant) dryer for 2-4 hours at 130-140°C, depending on moisture content. For injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

TEDUR® L 9200-1 U

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass/Mineral
Flexural Modulus:18300.0 - 18300.0 MPa

MOCOM Compounds TEDUR® L 9200-1 U is a polyphenylene sulfide base polymer with a filler/additive system of 60% glass fiber/mineral. It is designed for pre-drying conditions in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. It offers high toughness, high stiffness, low warpage, and low anisotropic shrinkage, making it suitable for use in the automotive and various market segments. It is typically used for applications such as seals.

TEDUR® L 9214-1

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber, Glass/Mineral, Mineral
Flexural Modulus:22000.0 - 22000.0 MPa

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

TEDUR® L 9217-1

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass/Mineral, Mineral
Flexural Modulus:19000.0 - 19000.0 MPa

MOCOM Compounds TEDUR® L 9217-1 is a Polyphenylene Sulfide base polymer filled with 65% glass fiber/mineral. It has high stiffness, hot oil resistance, and good hydrolysis resistance, making it ideal for highly stressed parts in the automotive, machinery, and lighting market segments. Pre-drying Conditions require a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. Injection molding requires a melt temperature of 320-340°C and a mold temperature of >140°C.

TEDUR® L 9105-1

Polymer Name:Polyphenylene Sulfide (PPS)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:10500.0 - 10500.0 MPa

MOCOM Compounds TEDUR® L 9105-1 is a Polyphenylene Sulfide base polymer with 30% glass fiber filler/additive system. It is designed for automotive and machinery applications and is known for its high toughness and stiffness. During processing with injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C.

Knowde Brand Summary

Identification

Chemical Family: Polyphenylene Sulfide (PPS)
Fillers Included: Carbon Fiber,
Glass Bead,
Glass Bead/Glass Fiber,
Glass Fiber,
Glass/Mineral,
Graphite,
Iron,
Metal,
Mineral,
PTFE,
Proprietary,
Silicone
Polymer Name: Polyphenylene Sulfide (PPS)
Technologies: Plastics
Product Families: Engineering & Specialty Polymers
High Performance Thermoplastics
Plastics & Elastomers Functions: Resin

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
Food Contact Acceptable,
PAH-Free,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free,
Recycled

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Industrial
Applications: Automotive
Aftermarket Parts & Components,
Automotive Lighting,
Exterior & Body
Building Materials
Pipes & Plumbing
Chemical & Industrial Manufacturing
Equipment & Parts
Parts & Components
Housings & Enclosures,
Sensors & Actuators,
Terminal Blocks, Plugs & Sockets
Plastics & Elastomers End Uses: Automotive Applications,
Automotive Exterior Parts,
Bearing Bushes,
Bearings,
Bobbins,
Bushings,
Chain Links,
Construction Applications,
Covers,
Crank Shaft Seal,
Ducting Systems,
EMI Shielding,
Electrical Components,
Electrical/Electronic Applications,
Fixtures,
Fuel Cells,
High Pressure Vessels,
Holder,
Housings,
Lamp Sockets,
Machine/Mechanical Parts,
Pipe Fitting,
Pipes,
Piping,
Plugs,
Pressure Vessel,
Profiles,
Pump Housing,
Pump Impeller,
Pump Parts,
Reflectors,
Seals,
Sliding Parts,
Sockets,
Tachograph,
Tappets
Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding

Knowde Brand Highlights

Tedur® Highlights and Advantages: Tedur®, the exceptional talent among thermoplastics with excellent chemical resistance and high operating temperatures up to 240 °C, offers several applications in different industries. Due to the low thermal expansion, Tedur® can be used as an ideal replacement for metals, metal alloys and ceramics. Tedur® compounds based on linear PPS (polyphenylene sulfide) offer very good dimensional stability, even at temperatures above 200 °C.

Depending on the loads it can withstand service temperatures up to 240 °C. Additionally, Tedur® is characterized by extremely low water ab- sorption as well as very good resistance to chemicals and fuels. Tedur® is a good insulator and has a low dielectric loss factor. With the innovation of Tedur® HTR a PPS compound achieved the highest tracking resistance (CTI 600) for the first time and can be used in high voltage applications.

A large number of Tedur® materials meet the requirements of V-0 according to UL94 without any addition of flame retardants. In order to this Tedur® is predestined for the use in the E&E sector and for e-mobility.

There is a wide range of Tedur® materials for automotive, transport, electrical industry, energy, machinery and equipment available. For special applications we gladly develop tailor-made products for you.

Tedur®: the advantages at a glance

Very high continuous operating temperatures (up to 240 °C)

Excellent hydrolysis, chemical and fuel resistance

Very high rigidity and strength

Low creep even at higher temperatures

Flame retardant (V-0), without addition of flame retardant

Very low water absorption

Fill levels up to 80 %

Linear PPS

High heat deflection (max. 270 °C)

High filled grades with good flowability

Excellent chemical resistance

Food contact

Reflector grades with excellent, glossy surface quality

Wear protect

High tracking resistance

Electrical conductivity

Unfilled extrusion grade